|
Title: [RESOLVED] Avalon Batch 2 Mini strange behaviour Post by: MAB on November 17, 2013, 12:22:11 AM Hi there,
I've been experiencing some strange behaviour on one of my Avalon Batch 2 Minis when attempting to log into the OpenWRT interface via WiFi. I am capable of logging in to the device via ethernet (using the ethernet IP address, naturally). However, when I attempt to connect via WiFi, I get a black screen with the text "LuCI - Lua Configuration Interface" and nothing else (Firefox reports spinning and "Connecting"), and then it times out. To make matters slightly more confusing, if I plug in the device via ethernet, and attempt to access it via the WiFi IP address, I connect just fine, and additionally, when I attempt to log in with just the WiFi and no ethernet connection, if I plug the ethernet cable in while Firefox spins and says, "Connecting", it'll immediately connect. Any thoughts? Thanks, MAB Title: Re: [Help] Avalon Batch 2 Mini strange behaviour Post by: zulover on November 17, 2013, 12:25:05 AM Perfectly normal.you can connect over wifi with ethernet cable being used.one or the other only. Belive I did it on 16 of them.
Title: Re: [Help] Avalon Batch 2 Mini strange behaviour Post by: Bogart on November 17, 2013, 01:12:09 AM Do you have the interfaces bridged?
Is the avalon wifi set to AP mode, or is it in client mode and set to connect to some other wifi AP? Personally I only use ethernet for all my miners, avalons and otherwise. Title: Re: [Help] Avalon Batch 2 Mini strange behaviour Post by: MAB on November 17, 2013, 12:00:28 PM Thanks Bogart, that seemed to be the issue. I have now resolved it and I went through the configuration of two devices (the one with strange behaviour and another which was chugging along just fine) and that was the issue. A quick change and a hard reboot solved it. Thanks!
|