Title: ASICMINER CUBE SETUP HELP Post by: bittawm on November 18, 2013, 10:55:43 AM if someone could please please please please help me set one of these up
I have it all powered and conected to modem but I do not know what to type into all the fields on the 192.168.1.254:8000 page for the cube I use bfg miner and have the same port in twice like I should have port 8330,8330 and my batch file is as follows: bfgminer.exe -o stratum.bitcoin.cz:3333 -u xxxxxx -p xxxxxxx --disable-gpu -S all --http-port 8330 bfg starts up and closes straight aaway any help would be apreciated mates I will give a small donation to the person who helps me out Title: Re: ASICMINER CUBE SETUP HELP Post by: Zeek_W on November 18, 2013, 11:01:26 AM You can just use a ASICMiner Blade setup tutorial from what I can tell to set it up. I don't have a blade so more detailed help from me isn't going to be accurate.
Title: Re: ASICMINER CUBE SETUP HELP Post by: bittawm on November 18, 2013, 11:22:47 AM i followed a blade setup and it failed
Title: Re: ASICMINER CUBE SETUP HELP Post by: demonmaestro on November 18, 2013, 11:23:29 AM I had sent you a pm. it is easy to setup.
Title: Re: ASICMINER CUBE SETUP HELP Post by: AbiTxGroup on November 18, 2013, 11:26:46 AM if someone could please please please please help me set one of these up Hope this helps.I have it all powered and conected to modem but I do not know what to type into all the fields on the 192.168.1.254:8000 page for the cube I use bfg miner and have the same port in twice like I should have port 8330,8330 and my batch file is as follows: bfgminer.exe -o stratum.bitcoin.cz:3333 -u xxxxxx -p xxxxxxx --disable-gpu -S all --http-port 8330 bfg starts up and closes straight aaway any help would be apreciated mates I will give a small donation to the person who helps me out You need to find out why bfgminer is closing straight away. You can find out by opening a command prompt window and running the batch file in the window. ( windows key+R, in popup type "cmd" without the "", then change directory to where your bfgminer is at. Once there, run the batch file. Any errors or bfgminer closes, the command window will stay open) Just in case, here is my batch file contents: C:\bfgminer-3.5.2-win32\bfgminer -G --http-port 8332 -Q 45 -s 50 -E 60 -S noauto -o stratum+tcp://stratum.mining.eligius.st:3334 -O btc-address -o stratum+tcp://mint.bitminter.com:3333 -O username The "-G" tells bfgminer not to use the GPUs The "-Q, -s, -E" are queue size, scantime, expiry The "-S noauto" stop bfgminer from scanning com ports (I am only using the proxy function of bfgminer) I have two server entries for backup purposes. Starts with eligius Title: Re: ASICMINER CUBE SETUP HELP Post by: demonmaestro on November 18, 2013, 11:31:58 AM the cubs run just like the blades and need the gatework to startum proxy to be ran... As of right now they are having issues still with USB support.
Title: Re: ASICMINER CUBE SETUP HELP Post by: AbiTxGroup on November 18, 2013, 11:37:36 AM the cubs run just like the blades and need the gatework to startum proxy to be ran... As of right now they are having issues still with USB support. Was this in response to my post?If yes, then that is why I have "-S noauto" and the "--http-port 8332". This is for proxy use to the stratum server pool only. The usb port on the cubes are for debugging and firmware updates, they are not for mining, you have to use the ethernet port for mining connectivity. Title: Re: ASICMINER CUBE SETUP HELP Post by: demonmaestro on November 18, 2013, 11:39:52 AM that makes it confusing...
here is a simple zip file with everything you need just need to run the file. http://mining.bitcoin.cz/mining-proxy-howto Title: Re: ASICMINER CUBE SETUP HELP Post by: AbiTxGroup on November 18, 2013, 12:04:39 PM that makes it confusing... I hate that proxy, I had to many problems keeping it running correctly.here is a simple zip file with everything you need just need to run the file. http://mining.bitcoin.cz/mining-proxy-howto I dont see how running bfgminer can be confusing, in fact the OP had the correct commands in his batch, just did not need the "-S all". More than likely is that the batch file does not have the proper path to the working directory which causes the window to close right after opening. I run the bfgminer on my laptop (a backup proxy) as the second IP in my blade configs so that if I am working on the first proxy machine (a scrypt miner) and something happens to it (bfgminer crashes or whatever), the blades connect to the laptop and keep on mining. Title: Re: ASICMINER CUBE SETUP HELP Post by: klondike_bar on November 18, 2013, 12:55:41 PM my understanding is that you dont need usb connection. just connect power and ethernet, then configure everything via the webUI address
Title: Re: ASICMINER CUBE SETUP HELP Post by: bittawm on November 18, 2013, 10:24:13 PM guys someone has helped me with this thank you so much btc comunity
Title: Re: ASICMINER CUBE SETUP HELP Post by: xjack on November 18, 2013, 11:27:30 PM guys someone has helped me with this thank you so much btc comunity Why not post the solution so others can learn from your plight? Did you get USB working? Did you setup via web interface and install proxy somewhere? Inquiring minds... Title: Re: ASICMINER CUBE SETUP HELP Post by: demonmaestro on November 19, 2013, 01:54:26 AM he used the proxy. I will post a how to in a day or so with pictures. Ive been using the proxy with no issues.
Title: Re: ASICMINER CUBE SETUP HELP Post by: daddyfatsax on November 20, 2013, 10:03:44 PM he used the proxy. I will post a how to in a day or so with pictures. Ive been using the proxy with no issues. I am definitely interested in seeing how to set these up. Title: Re: ASICMINER CUBE SETUP HELP Post by: demonmaestro on November 20, 2013, 11:59:28 PM he used the proxy. I will post a how to in a day or so with pictures. Ive been using the proxy with no issues. I am definitely interested in seeing how to set these up. Its real easy. i got a cube and some blades on the way i will make a video how to set them up. Title: Re: ASICMINER CUBE SETUP HELP Post by: Chris_Sabian on November 21, 2013, 03:43:51 AM he used the proxy. I will post a how to in a day or so with pictures. Ive been using the proxy with no issues. I am definitely interested in seeing how to set these up. Its real easy. i got a cube and some blades on the way i will make a video how to set them up. Please do, that would be very helpful :) Title: Re: ASICMINER CUBE SETUP HELP Post by: demonmaestro on November 21, 2013, 03:58:06 AM However in the mean time if anyone need help and dont mind me using TeamViewer(Remote Desktop) into there computer to get it working it takes only 5-10minutes to get you up and running! 8) Just send me a PM
I had gotten bittawm & darthvictor up and running! Title: Re: ASICMINER CUBE SETUP HELP Post by: HellDiverUK on November 21, 2013, 10:10:13 AM It's pretty simple - the batch file the OP posted is mostly correct. He just needed to move to BFG 3.6.0, remove the --disable-gpu as it isn't needed, as there is no GPU support any more on pre-compiled versions. Only the Win32 version has the proxy, which you can run on 32-bit and 64-bit Windows. I suspect he was using the Win64 version of BFG which would be the issue.
Also you need to use a unique username for each blade connecting to the BFG proxy. They can be anything, doesn't matter, as long as they're unique. Title: Re: ASICMINER CUBE SETUP HELP Post by: dogie on November 30, 2013, 03:08:16 AM https://bitcointalk.org/index.php?topic=352658 Thread is up for reference
Title: Re: ASICMINER CUBE SETUP HELP Post by: aetos on January 15, 2014, 03:42:53 AM https://bitcointalk.org/index.php?topic=383137.0
simple proven to work 100% no proxy |