Bitcoin Forum

Hey guys,

I'm having trouble getting the BTB Furys and BTB XX to work in one cgminer.

The --avalon-options are also assigned to the Furys, which won't work and --bitburner-fury-options isn't working. Tried it with cgminer 3.5, 3.6 and 3.8.2 on Windows and Raspian


Also, the Furys refuse to hash with 3.8 regardless of any settings.

Bump, because I've tried everything I can think of but haven't gotten anywhere.

Bump.

with cgminer you dont need to use any command options like -Avalon.

all you do is run the zadig tool to change the drivers then enter you mining info and you should be done

when installing the drivers install them then unplug the miner from the computer and plug it back in then start cgmiiner and it should work


i would have replied earlier but dont have a clue about bitburners

I've already done all that.

Bitburner Furys and Bitburner XXs use different settings but cgminer won't do that. It would work if it would recognize the command "--bitburner-fury-options" like it says in the freaking readme...

That's what's got me stumped. I've compiled cgminer with all the correct things enabled and yet it still won't work.

Edit: To clarify, the Fury and XX boards are recognized as the same thing in cgminer even when flashing the Fury to the newest firmware.

This has just solved 90% of my headaches, I have been searching all over abd this would be the first time I have come across that tiny little bit of info! Many thanks   :)