|
Title: NEW Bitmain Antminer L3++ 596 MH RELEASE MAY Post by: sil2222 on April 27, 2018, 02:05:45 PM Its real Antminer L3++
Be careful the new Bitmain Antminer L3++ is less efficient than the L3+ 1.762j/Mh vs 1.587j/Mh and also noisier! https://www.asicminervalue.com/miners/bitmain/antminer-l3-596mh https://twitter.com/ASICMinerValue/status/989872239960092673 CHECK DATA SHEET ON LINK update: BITMAIN HAS ALREADY LISTED L3++ specifications and other information on the Antminer L3+. Specifications of L3++ maybe slightly higher than L3+. DELIVERY MAY PRICE IS $ 750.00. Title: Re: NEW Bitmain Antminer L3++ 596 MH RELEASE MAY Post by: cod3gen on April 27, 2018, 02:53:41 PM 596 Mh/s on 1050w? Yes, its less efficient. My L3+`s runs at ~630Mh/s with between 950w - 1000w on wall.
Title: Re: NEW Bitmain Antminer L3++ 596 MH RELEASE MAY Post by: Manhcoin86 on April 27, 2018, 03:41:36 PM information is not incorrect?
Title: Re: NEW Bitmain Antminer L3++ 596 MH RELEASE MAY Post by: dutchlincoln on April 27, 2018, 04:13:07 PM 596 Mh/s on 1050w? Yes, its less efficient. My L3+`s runs at ~630Mh/s with between 950w - 1000w on wall. hi, How do you get 630 out of your L3+? Im curious... :) Title: Re: NEW Bitmain Antminer L3++ 596 MH RELEASE MAY Post by: KashHappy on April 27, 2018, 04:47:53 PM 596 Mh/s on 1050w? Yes, its less efficient. My L3+`s runs at ~630Mh/s with between 950w - 1000w on wall. hi, How do you get 630 out of your L3+? Im curious... :) I'm sure he's overclocked. I'm curious to know the settings and steps as well. Title: Re: NEW Bitmain Antminer L3++ 596 MH RELEASE MAY Post by: hawkfish007 on April 27, 2018, 05:02:20 PM Simply changing frequency to 475 or 500 will increase hash rate over 600 MH/s, default is 384. Keep an eye on for temp and Xs, most L3+s should be able to mine at over 600 MH/s at 475 MHz.
Title: Re: NEW Bitmain Antminer L3++ 596 MH RELEASE MAY Post by: jstefanop on April 27, 2018, 05:30:11 PM This is not new or news...its just an overclocked L3+...
Title: Re: NEW Bitmain Antminer L3++ 596 MH RELEASE MAY Post by: sil2222 on April 27, 2018, 05:51:10 PM This is not new or news...its just an overclocked L3+... Well if you were waiting for L4 from Bitmain this is what they are going to offer instead. Title: Re: NEW Bitmain Antminer L3++ 596 MH RELEASE MAY Post by: HagssFIN on April 27, 2018, 06:45:03 PM It is most likely still using the same 28nm process chip BM1485.
And maybe there is even the same total amount of chips. The only new thing looks to be that it is overclocked a little. |