|
Title: Only Getting around 5 GH/s with Butterfly 50GH/s Unit Post by: renfors on November 25, 2013, 01:20:26 AM Hi,
Am I doing something wrong? Will it make any difference if I change to another mining-pool? My network connection is from a 3G connection (that works ok for surfing and streaming video), could a better connection make a difference? [2013-11-25 01:24:24] Started at [2013-11-24 16:47:30] [2013-11-25 01:24:24] Pool: Bitcoin mining pool [2013-11-25 01:24:24] Runtime: 8 hrs : 36 mins : 54 secs [2013-11-25 01:24:24] Average hashrate: 5507.6 Megahash/s [2013-11-25 01:24:24] Solved blocks: 0 [2013-11-25 01:24:24] Best share difficulty: 12.8K [2013-11-25 01:24:24] Share submissions: 40490 [2013-11-25 01:24:24] Accepted shares: 40319 [2013-11-25 01:24:24] Rejected shares: 171 [2013-11-25 01:24:24] Accepted difficulty shares: 40318 [2013-11-25 01:24:24] Rejected difficulty shares: 171 [2013-11-25 01:24:24] Reject ratio: 0.4% [2013-11-25 01:24:24] Hardware errors: 273 [2013-11-25 01:24:24] Utility (accepted shares / min): 78.02/min [2013-11-25 01:24:24] Work Utility (diff1 shares solved / min): 0.00/min [2013-11-25 01:24:24] Stale submissions discarded due to new blocks: 0 [2013-11-25 01:24:24] Unable to get work from server occasions: 0 [2013-11-25 01:24:24] Work items generated locally: 0 [2013-11-25 01:24:24] Submitting work remotely delay occasions: 10 [2013-11-25 01:24:24] New blocks detected on network: 70 [2013-11-25 01:24:24] Summary of per device statistics: [2013-11-25 01:24:24] BAL0 | (5s):5.797G (avg):5.507Gh/s | A:40318 R:171 HW:273 WU:0.0/m [2013-11-25 01:24:24] Title: Re: Only Getting around 5 GH/s with Butterfly 50GH/s Unit Post by: baicker on December 19, 2013, 02:59:49 AM hello dear
i have the same program I received the Butterfly 50GH/s Unit recently, when i run the cgminer, it only getting around 25GH/s, the highest speed is 42GH/s in the passed time, but it didn't last more than 1 hour, after the 1 hour, the speed is becomed to 19GH/s. what wrong with it ? Title: Re: Only Getting around 5 GH/s with Butterfly 50GH/s Unit Post by: Itun on December 19, 2013, 03:06:34 AM Are you sure your power supply is fully functional?
If it doesn't give enough energy, you might not get the hashing power expected. Title: Re: Only Getting around 5 GH/s with Butterfly 50GH/s Unit Post by: backhash on December 19, 2013, 03:19:30 AM Check you are using stratum protocol. 3G is high latency (200ms usually) which is not conducive to low latency work. You send 10 getwork, thats 10 x 200 ms for the work to do the round trip and come back. Scale it up and do the maths.In times your local 3g tower is busy, thatlatency is going to rocket up even more (and some packet loss dropped in for good measure). 4G can help too - if you can get it.
If you are using stratum, then as the previous poster said - its more than likely the PSU. -- 1FTEu3iVKWchXCcYNBT7PrpKDPydvTnWGy |