Bitcoin Forum

Alternate cryptocurrencies => Altcoin Discussion => Topic started by: torzsy on November 29, 2013, 09:14:16 AM



Title: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: torzsy on November 29, 2013, 09:14:16 AM
Pool closed.

* Stratum only
* PPLNS payout
* Working notification system for blocks, payouts, idle miners
* Pool pays the network transaction fee to the miners
* Automatic payout every minute
* 2% fee
* Difficulty: 64

Thanks for reading. :)


Source and Windows wallet on Github: https://github.com/RoadTrain/CHNCoin


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: adoalli on November 29, 2013, 09:16:19 AM
can't register


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: torzsy on November 29, 2013, 09:18:47 AM
can't register

Checking that. Thanks.



Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: torzsy on November 29, 2013, 09:23:27 AM
Problem solved. You dont need to register again, just use your registered username.

Thanks!



Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: torzsy on November 29, 2013, 09:56:04 AM
Chinacoin thread:

https://bitcointalk.org/index.php?topic=322488




Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: Goaheadz on November 29, 2013, 10:32:59 AM
Problem solved. You dont need to register again, just use your registered username.

Thanks!



Jason auth error. null 0

Everything is correctly configured, but server does not accept my worker.

Can you please check.

Goahead.1

Thx
G


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: torzsy on November 29, 2013, 10:49:25 AM
Problem solved. You dont need to register again, just use your registered username.

Thanks!



Jason auth error. null 0

Everything is correctly configured, but server does not accept my worker.

Can you please check.

Goahead.1

Thx
G

It should be working now. Please check connection!

Thanks!


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: Schwede65 on November 29, 2013, 11:48:29 AM
can't log-in after register

Schwede65

41 chars-PW

why?


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: tokyoghetto on November 29, 2013, 01:05:09 PM
not accepting my worker. credentials are all correct.


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: tokyoghetto on November 29, 2013, 01:07:10 PM
nvm its working now. time to strip mine this scamcoin.


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: 794259332 on November 29, 2013, 01:17:29 PM
thank you


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: torzsy on November 29, 2013, 04:02:43 PM
can't log-in after register

Schwede65

41 chars-PW

why?

You should be able to enter up to 60 characters. I use 32 chars length passwords and frontend accepts it without any problem.


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: torzsy on November 29, 2013, 04:02:54 PM
Source and Windows wallet on Github: https://github.com/RoadTrain/CHNCoin



Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: bremy33 on November 29, 2013, 06:43:01 PM
hi i can t register

regards


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: getwork on November 29, 2013, 07:54:32 PM
Registration is disabled for a while, pool has most of the network hashrate.


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: brows on December 05, 2013, 01:21:57 AM
Never got an atp, and I am not sure if it is the pool, the network or bter....  tx 571498. Can't seem to find it in the cnc explorer I found.

I did receive an atp after this one though, but am now off the pool.

Just wondering how I can find out where my coins are. It's been 12 hours at least. Shot an email to bter support but no response so far.


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: torzsy on December 05, 2013, 06:29:31 AM
Never got an atp, and I am not sure if it is the pool, the network or bter....  tx 571498. Can't seem to find it in the cnc explorer I found.

I did receive an atp after this one though, but am now off the pool.

Just wondering how I can find out where my coins are. It's been 12 hours at least. Shot an email to bter support but no response so far.

What does ATP mean? I didnt have any problems with CHN sending to anywhere. BTER needs 100 confirmations on CHN.



Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: brows on December 05, 2013, 11:01:24 AM
ATP=autopayout on the pool...   (in this case the cnc cryptominer pool).

Still no sign of it. If i could find the full tx id in my transactions at the pool maybe i could look on a block explorer and see what is happening with the transaction and determine if it made it on the the network or not (in which case it would be a mistake by Bter.com). If it hasn't even gone to the network, it must be something with the pool. Right? I search tx 571498 at the block explore and it seems like it is the wrong kind of number.

I have had numerous autopayouts go fine from the pool to Bter... just this one is no where to be found. Only 60 cnc but still... that's a meal!! If anyone can help it would be great.


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: limbaugh on December 06, 2013, 11:11:01 AM
Are you going to abandon and keep your user's coins with this pool as well? Use this guys pool with caution people.

*Edit* torzsy found a solution to the problem and followed through. All is well with his pools.


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: torzsy on December 07, 2013, 06:57:36 AM
Are you going to abandon and keep your user's coins with this pool as well? Use this guys pool with caution people.

What does this mean? Im not keeping any of your coins. Im not sitting every day front of the computer so it takes time to respond.


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: torzsy on December 08, 2013, 11:32:58 PM
ATP=autopayout on the pool...   (in this case the cnc cryptominer pool).

Still no sign of it. If i could find the full tx id in my transactions at the pool maybe i could look on a block explorer and see what is happening with the transaction and determine if it made it on the the network or not (in which case it would be a mistake by Bter.com). If it hasn't even gone to the network, it must be something with the pool. Right? I search tx 571498 at the block explore and it seems like it is the wrong kind of number.

I have had numerous autopayouts go fine from the pool to Bter... just this one is no where to be found. Only 60 cnc but still... that's a meal!! If anyone can help it would be great.

I can see those coins went out from the pool.

http://coinplorer.com/CNC/Transactions/6dc58f4c11de95333b74f6ba444ec9614c99e66181d8674fbc1d69337ef31518

60.711 CHN



Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: torzsy on December 11, 2013, 02:04:23 PM
Upgrading server.


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: torzsy on December 11, 2013, 02:27:33 PM
Upgrade completed. Pool is up again.


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: torzsy on December 14, 2013, 10:09:00 AM
Provider has cut access to the server due to DDoS attack. Waiting for ticket reply.


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: torzsy on December 14, 2013, 11:27:48 AM
Pool is up, payments will be credited in a few minutes.


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: Taxidermista on December 14, 2013, 11:47:49 AM
Pool is up, payments will be credited in a few minutes.

Pool is still down.


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: torzsy on December 14, 2013, 12:31:28 PM
Pool is up, payments will be credited in a few minutes.

Pool is still down.

Yepp. Under DDoS again.  >:(


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: torzsy on December 15, 2013, 11:19:59 PM
Upgrading pool server, getting DDoS protection in the next few days.  :)


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: KoopaCoins on January 25, 2014, 12:14:54 AM
Came home from work and no CNC sent from the pool.  Per your site, my last credit was at 1:00pm Central Time and still now show as confirmed or anything.  The site also shows that we have 124 unconfirmed but its not listed in the transactions.  The site also shows notifications of payouts throughout the day but nothing in the wallet and nothing listed on the transactions page

What is going on?  We are pulling out of your pool until you respond and explain.

I'm not sure how to embedded images to this forum, but I can send you screen shots of what I'm seeing.


UPDATE: 1/25/2014:  Fixed everything this is a good pool, was responsive to my concerns.   

Torzy you the coin bomb my friend!  Looks like all is good on the payout, thank you for fixing this.  I had faith in ya :)

We've targeted our main group of miners to another coin for a bit.  Once we get a few more rigs will be back!


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: torzsy on January 25, 2014, 07:34:23 AM
Came home from work and no CNC sent from the pool.  Per your site, my last credit was at 1:00pm Central Time and still now show as confirmed or anything.  The site also shows that we have 124 unconfirmed but its not listed in the transactions.  The site also shows notifications of payouts throughout the day but nothing in the wallet and nothing listed on the transactions page

What is going on?  We are pulling out of your pool until you respond and explain.

I'm not sure how to embedded images to this forum, but I can send you screen shots of what I'm seeing.


Hello,

I will check this. Blocks not confirming, it must be a database error.

Thanks



Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: torzsy on January 25, 2014, 07:45:46 AM
Cronjob was stucked. Blocks are now confirmed, transactions went out.

Have a nice day!



Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: KoopaCoins on February 14, 2014, 03:05:03 PM
Looks like payouts are stuck again going into 24 hours and no deposits to our wallet


UPDATE 2/14/2014:  All coins in thank you Torzsy for fixing!


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: torzsy on February 14, 2014, 07:25:53 PM
Looks like payouts are stuck again going into 24 hours and no deposits to our wallet

Sorry for the delay, I've been sick in the past 2 days, couldn't take care of the pool. Things are back to normal.

Have a nice weekend!



Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: KoopaCoins on February 14, 2014, 11:17:23 PM
Looks like all deposits are in thank you for taking the time to fix it!  Hope your feeling better Torzsy. 


Title: Re: ChinaCoin [CNC] pool opened | Stratum only | 2% Fee
Post by: torzsy on February 19, 2014, 12:09:21 PM
Everyone please search anwsers in the official thread. I have serious illness and cant sit at computer.

Hope I will be fine in a week and can get back to business.

Thanks all.