Title: bfgminer and freebsd problem detect usb block erupter Post by: evolvia31 on December 04, 2013, 01:59:03 PM Hi all,
I'm newbie here so i can't post to the appropriate thread :( I have a problem with my config. I'm running Under FreeBSD 8.x When i run "./configure" all is right i have this output: Quote ------------------------------------------------------------------------ bfgminer 3.8.0 configuration options summary ------------------------------------------------------------------------ CFLAGS...............: -I/usr/local/include/ncurses -I/usr/local/include -pthread -g -O2 -I/usr/local/include -pthread -Ilibblkmaker LDFLAGS..............: -pthread -Llibblkmaker/.libs -Wl,-rpath,\$$ORIGIN/libblkmaker/.libs,-zorigin -lpthread -L/usr/local/lib -lcurl -L/usr/local/lib -ljansson -L/usr/local/lib -rpath /usr/local/lib -lncurses -ltinfo -lm -lusb -lblkmaker_jansson-0.1 -lblkmaker-0.1 Installatio[Suspicious link removed]efix..: /usr/local Enabled..Drivers.....: avalon bifury bigpic bitforce bitfury_gpio cairnsmore erupter hashbuster2 icarus klondike littlefury modminer proxy proxy:getwork proxy:stratum twinfury x6500 ztex Disabled.Drivers.....: bfsb cpu hashbuster knc metabank nanofury opencl To enable nanofury, install hidapi To enable hashbuster, install hidapi Enabled..Algorithms..: SHA256d Disabled.Algorithms..: scrypt Enabled..Options.....: ncurses5 Disabled.Options.....: When i run "make" all is right too, i have this output: Quote cd libblkmaker && make CCLD bfgminer CC bitforce-firmware-flash.o CCLD bitforce-firmware-flash CC api-example.o CCLD bfgminer-rpc but when i launch bfgminer, it didn't detect my usb erupter block When i connect the usb erupter block i have this message: Quote Dec 4 12:01:47 xxxxx kernel: ugen5.2: <Silicon Labs> at usbus5 and in the /dev i have this:Dec 4 12:01:47 xxxxx kernel: uslcom0: <CP2102 USB to UART Bridge Controller> on usbus5 Quote cuaU0 cuaU0.init cuaU0.lock ttyU0 ttyU0.init ttyU0.lock Anyone can help me?? When bfgminer is launch if i push "m" and "+", if i put "erupter:/dev/ttyU0" or "erupter:/dev/cuaU0" i have this message: Quote (no devices) [Plus] Add device(s) [Enter] Close device manager No new devices found Erupter works fine on Windows. Thanks to your help |