|
Title: erupter blade for dummies.... im a dummy Post by: rffr on December 11, 2013, 10:16:25 AM ok. im getting a little frustrated. im new to this bitcoin/computer stuff but im a fast learner. i just need somebody to point me in the right direction.
i have a V2 erupter blade hooked up to the powersupply and im looking at the configuration page on my laptop. i have the IP changed to 192.168.1.201 like i have seen suggested. i cant figure out what to do with the rest of the stuff. im trying to connect to Slush's pool and i downloaded the stratum and got that running... i think. all of this is being done via a laptop and wireless router... maybe thats my problem can someone help me out in "layman's terms"? Title: Re: erupter blade for dummies.... im a dummy Post by: rekweam on December 11, 2013, 12:16:19 PM what do you have in each line on the config page?
Title: Re: erupter blade for dummies.... im a dummy Post by: rekweam on December 11, 2013, 12:22:26 PM In layman's
IP : Whatever you assigned Mask : dont touch 255.255.255.0 Gateway : don't touch 192.168.1.1 Webport : I don't touch 8000 Primary DNS : I believe i didn't touch 192.168.1.1 Secondary DNS : I believe i didn't touch 211.148.192.141 Ports : 8332,8332 Server address : Your laptops IP address EG 192.168.1.2,192.168.1.2 (yes twice) user:pass : username:password,username:password Title: Re: erupter blade for dummies.... im a dummy Post by: rffr on December 11, 2013, 03:16:25 PM In layman's IP : Whatever you assigned Mask : dont touch 255.255.255.0 Gateway : don't touch 192.168.1.1 Webport : I don't touch 8000 Primary DNS : I believe i didn't touch 192.168.1.1 Secondary DNS : I believe i didn't touch 211.148.192.141 Ports : 8332,8332 Server address : Your laptops IP address EG 192.168.1.2,192.168.1.2 (yes twice) user:pass : username:password,username:password thanks for the call back IP : 192.168.1.201 Mask : 255.255.255.0 Gateway : 192.168.1.101 Webport : 8000 Primary DNS : 192.168.1.254 Secondary DNS : 211.148.192.141 Ports : 3333, 3333 Server Address : stratum.bitcoin.cz:3333, stratum.bitcoin.cz:3333 User : username and password (mine) i can only get the configuration page to come up after i set the static IP address to: IPv4 : 192.168.1.100 Ipv4 : 192.168.1.1 Title: Re: erupter blade for dummies.... im a dummy Post by: rffr on December 11, 2013, 04:52:58 PM is it possible to set this up wireless through my laptop?
Title: Re: erupter blade for dummies.... im a dummy Post by: rffr on December 11, 2013, 07:44:49 PM ok. no more fucking with wireless connections. i went and bought a 5port switch and now i have my laptop that is running the stratum, the blade, and internet connection all running into the switch.
the stratum is running but my blade keeps resetting every 2 1/2 min. it never connects to the pool. my configuration is as follows: IP : 192.168.1.201 Mask : 255.255.255.0 Gateway : 192.168.1.1 WEB Port : 8000 Primary DNS : 192.168.1.1 Secondary DNS : 211.148.192.141 Ports : 8332, 8332 Server addresses : 192.168.1.100, 192.168.1.100 user:pass : rffr.worker1:xxxx, rffr.worker1:xxxx Title: Re: erupter blade for dummies.... im a dummy Post by: rekweam on December 12, 2013, 06:29:23 AM Any your server address is the ip address of your laptop?
When going to the config page don't forget to add :8000 to the end. As that is the open port. e.g. 192.168.1.100:8000 Title: Re: erupter blade for dummies.... im a dummy Post by: rekweam on December 12, 2013, 06:35:18 AM I have the software running wirelessly and setup on my laptop.
Title: Re: erupter blade for dummies.... im a dummy Post by: rekweam on December 12, 2013, 06:45:13 AM what are you typing into the slush proxy?
Title: Re: erupter blade for dummies.... im a dummy Post by: rffr on December 13, 2013, 04:37:45 AM got it figured out with some help from the bitcoin.cz IRC.
thanks Title: Re: erupter blade for dummies.... im a dummy Post by: rekweam on December 13, 2013, 05:46:43 AM Glad you got it going. Happy mining.
|