|
Title: OverdriveNTool How to set fans properly Post by: Spllouder on May 09, 2018, 08:25:57 PM Hi, I been using overdriventool for a couple month's now and really enjoy the simplicity of the OC settings, Everything there is fine. But the fan control's I do not all understand?
I have all AMD RX570's Asus gaming OC 4gb & MSI Armours 4gb,8gb & XFX 4gb RX570's My question is about the acoustical limit and RPM speeds? Because i have the MSI and XFX Cards will go above the target temp of 60C, and the fan speed is only 48%. matter of fact all of the msi wont go above 48% fan speed and going above the target temp, what am i doing wrong? RPM LOW: 1330 RPM HIGH: 2200 Target Temp: 60c Acoustical Limit: 910 Mhz OC Settings: 1100/1150 CC 850 VC 2000Mhz 900VC All 1500 Timing Strap Bios modded Title: Re: OverdriveNTool How to set fans properly Post by: Spllouder on May 09, 2018, 11:03:12 PM Ok i figured it out i think,
I simply had to raise the RPM MIN: 2000 Max: 3500 Now it will speed up to full fans if needed, Every card brand is different and adjust according |