|
Title: Revive - Manageable Hardware Restarter - v1.0 Post by: Skowron on May 10, 2018, 11:22:21 AM I would like to present you our new product Revive - Manageable Hardware Restarter.
The goal is to keep GPU rigs running as much as they can without any interruption. From our findings we were able to gain up to 20% of performance just by using hardware restarter. Regain control over your rigs! Manageable? Revive will monitor your rigs automatically, but you can manage it manually through web-interface (desktop & mobile). Moreover you get access to the API, so can integrate it with any other software or custom scripts. Featuring:
How it works: After connecting Revive to your local network, open the dashboard navigating to assigned IP address. From the dashboard you will be able to add / remove your rigs and change your settings. There’s no need to install anything on your rigs! You can connect up to 16 rigs to Revive. In the box you will find adapters to plug to a motherboard and cables to connect adapter with restarter. Green led light will inform you if Revive works correctly and yellow one when any of the connected ports will perform a restart. The watchdog mode sends ping requests to each rig, every 3 seconds. If a rig is inactive for 60 sec a restart sequence will be called (hold down power off for 8s and power on again). In case of failure it will repeat again. You can also manually turn on, off and restart any of the connected rig. Moreover rich API allows you to integrate the restarter with your custom software and perform selected actions on any of the 16 ports. What you find in the box:
Revive will cost $299. For early adopters, first batch of 100 pcs, will be sold with special 33% discount - $199 ($12 per rig) You can order it here: https://revive.expert/ (https://revive.expert/) The order will be prepared for shipment within 3 - 14 days after paying. Roadmap:
Images: https://cdn.shopify.com/s/files/1/0066/2228/1788/files/prototyp2_8052020e-fa8b-477c-afaf-20d4106e31fc_720x.jpg?v=1525539978 https://cdn.shopify.com/s/files/1/0066/2228/1788/files/image_2_1200x.png?v=1525880753 https://cdn.shopify.com/s/files/1/0066/2228/1788/files/image_4_1200x.png?v=1525880779 https://cdn.shopify.com/s/files/1/0066/2228/1788/files/image_5_1200x.png?v=1525880782 https://cdn.shopify.com/s/files/1/0066/2228/1788/files/image_3_1200x.png?v=1525880805 Title: Re: Revive - Manageable Hardware Restarter - v1.0 Post by: ioglnx on May 10, 2018, 11:41:49 AM How the connection looks like..I assume you connect to the RESET/PWR switch on the mainboard.
But you have no picture posted about this hardware setup/how it looks like on all the end. Could you please provide them? Title: Re: Revive - Manageable Hardware Restarter - v1.0 Post by: Skowron on May 10, 2018, 11:47:47 AM There is a small adapter which you connect to the MOBO's power pins. You can fasten it to the frame. Then you connect adapter with Revive using ethernet cable (the most popular one - RJ45). Adapters and cables are included in the box.
I will get some photos later today and update this post. https://cdn.shopify.com/s/files/1/0066/2228/1788/products/32227046_224617374792348_943349065024798720_n_grande.jpg?v=1525959683 https://cdn.shopify.com/s/files/1/0066/2228/1788/products/32159596_224617448125674_2713168645185339392_n_grande.jpg?v=1525959682 Title: Re: Revive - Manageable Hardware Restarter - v1.0 Post by: Skowron on May 27, 2018, 04:17:19 PM We've prepared video presentation, which demonstrate how Revive is working:
https://www.youtube.com/watch?v=z6SkaA48R6A Waiting for a feedback! |
