|
Title: Serious Problem after setting up my mining Rigs - WILL REWARD IF SOMEONE SOLVES! Post by: just187 on December 15, 2013, 02:24:49 PM Hi,
im currently running 3 minning Rigs for Litecoins and i think i never get back what i should get. According to my calculations i should be rewarded with 0,03 ltc each hour when mining with 1900kh/s. But i didnt .. here is how i tested. 1. I setup a new account at give-me-coins.com 2. i started to mine at 21:20 Saturday and stopped at 23:30 ... so a little more then 2 hours 3. i used 2 of my rigs producing (1 x 7950 - 700khs/s + 2 x 7950 - 600kh/s) so a total mining power of ~1900 kh/s, these dont have any hardware errors ... example of the 7950 producing ~700kh/s (5s):711.3K (avg):708.6Kh/s | A:42259 R:469 HW:0 WU:620.1/m ST: 1 SS: 366 NB: 60 LW: 3025 GF: 0 RF: 0 GPU 0: 74.0C 3379RPM | 707.4K/709.1Kh/s | A:42259 R:469 HW:0 WU:620.9/m I:20 4. After 2 Hourse i stopped mining for this new account 5. First strange thing, my account only showed a mining power of 1200kh/s .. after asking in the irc chat, i was told this would be normal and i only should care what cgminer show me. 5. I waited 24 hourse and looked at my account balance .. but i got only 0,02 ltc ... http://img560.imageshack.us/img560/8279/gl2a.jpg (http://imageshack.us/photo/my-images/560/gl2a.jpg/) I then tought .. ok ... maybe there is something wrong with the 7950 cards ... and tested with my third rig (2 x 280x - ~1400kh/s) this should be producing 0.48 LTC per day. But again, it didnt .... Here is a chart showing that it produced a steady 1400kh/s, even more, but lets calculate with 1400kh/s Again, i setup a new account for this but tested 24 hours this time ... http://img191.imageshack.us/img191/3338/2aip.jpg (http://imageshack.us/photo/my-images/191/2aip.jpg/) Again, none of the cards shows hardare errors or a lot of rejects .... If anyone can solve this issue .. i will reward with atleast 1 Litecoin regards just Title: Re: Serious Problem after setting up my mining Rigs - WILL REWARD IF SOMEONE SOLVES! Post by: jezzpalmer on December 15, 2013, 03:34:27 PM You need to do it for more than 2 hours.
In some hours no blocks are found, in others 10 mght be. If you look at this page https://give-me-coins.com/pool/block_stats you can see the varience in time taken to find blocks. On this page you can see how many blocks were found per hour.. https://give-me-coins.com/pool/pool_stats The hash rate on give me coins dos bounce all over the place not sure if this is to do with vardiff, but I find that the average over say a day is pretty much what my rigs are doing, but sometimes it'll say <3Mh/s, then others >6Mh/s. where the daily average is somewhere in the middle. I'm no expert, but some pools seem well dodgy, give me coins seems ok to me. I generally mine feather coin there and get what I expect. Title: Re: Serious Problem after setting up my mining Rigs - WILL REWARD IF SOMEONE SOLVES! Post by: just187 on December 15, 2013, 03:52:32 PM Hello,
thank you for your reply. After my 2 Hour Test i did a 24 Hour test, and i also didnt get what i should. Also i if take a look at https://give-me-coins.com/pool/block_stats i can see that a block is found all ~20 minutes ... not that big of a varience in time for me. Sorry, but i still think i have a diffrent problem. I now tried with a diffrent pool, but still .. same thing, here are screenshot of my cgminer windows, maybe someone can see something i dont. http://img4.imageshack.us/img4/7980/zbdn.jpg (http://imageshack.us/photo/my-images/4/zbdn.jpg/) http://imageshack.us/a/img41/934/wxef.jpg (http://imageshack.us/a/img41/934/wxef.jpg/) http://imageshack.us/a/img837/8717/0g6t.jpg (http://imageshack.us/a/img837/8717/0g6t.jpg/) |
