|
Title: Technobit HEX16A2 won't start mining Post by: stiffla on December 21, 2013, 03:25:18 PM Hi,
I finally received my board from Technobit. Problem is, that I am not able to get the board up running neither on raspberry nor on Win7 with the HEX Miner software. I followed the instructions in the official topic https://bitcointalk.org/index.php?topic=323727.200 but it is still not working. The only thing that is counting up is LW in cgminer and Work age in HEX Miner. Anyone had the same problems? @marto74 if you read this, maybe you could help me please best regards Title: Re: Technobit HEX16A2 won't start mining Post by: TrytoHex on December 22, 2013, 08:03:52 AM I had the same problem with win7. Could't get it to work. Now I'm using Pi with minepeon and patched cgminer.
When using Raspberry, did you patch your cgminer? Title: Re: Technobit HEX16A2 won't start mining Post by: stiffla on December 22, 2013, 02:45:56 PM I had the same problem with win7. Could't get it to work. Now I'm using Pi with minepeon and patched cgminer. When using Raspberry, did you patch your cgminer? yes i patched the cgminer and also tried with cgminer 3.8.1 and v3.8.5 (which failed compiling) I am using a pi with debian and a notebook with ubuntu for testing at the moment The hex board is just blinking! Title: Re: Technobit HEX16A2 won't start mining Post by: Soiled on December 27, 2013, 04:44:38 PM I borrow this topic.
As a newbie I have question about Hexminer (I have Technobit HEX16A) . How I can mine different coins using hexminer? Example asiccoin in pool http://www.coinmine.pl/asc/ or is it possible at all. I can mine btc in -o stratum.mining.eligius.st -p 3334 but you don't have to register there and make workers so what I need to write in stratum converter? If I use example -o stratum+tcp://asc.coinmine.pl:6110 there comes extra :3333 behind the address when running the converter. Thank you for your help! |