Title: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: torzsy on December 22, 2013, 11:44:20 AM closed
Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: dodo333 on December 22, 2013, 11:49:08 AM Very good support! ! ! :)
Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: torzsy on December 22, 2013, 11:51:56 AM Very good support! ! ! :) Thank you! I hope we can test the new daemon. :) Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: MaGNeT on December 22, 2013, 11:59:54 AM Great! Mining there now ;D
Brought some people over from FOK! forum too :) Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: torzsy on December 22, 2013, 12:05:18 PM Great! Mining there now ;D Brought some people over from FOK! forum too :) Thanks MaGNeT! :) Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: Aur3 on December 22, 2013, 12:08:11 PM Finally found working pool of earthcoin, thanks for creating this :)
Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: mac-coin on December 22, 2013, 12:09:33 PM I've just switch over too
How accurate are the EAC/Day on this pool Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: torzsy on December 22, 2013, 12:12:33 PM I've just switch over too How accurate are the EAC/Day on this pool Block reward is 10.000 / block now as I know. So it should be correct. :) But we will see in a few hours (if we find blocks). Thanks! edit: previous daemon was bugged so the stats were wrong Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: woutersteven on December 22, 2013, 12:22:16 PM Not working for me, getting:
2013-12-22 20:16:37: Running command: "C:\Miners\guiminer-scrypt_win32_binaries_v0.04\cgminer\cgminer.exe" --scrypt -u woutersteven.eac1 -p x -o stratum+tcp://eac.cryptominer.net:3403 --gpu-platform 1 -d 0 -w 256 -v 1 -I 13 -g 2 -l 1 -T --lookup-gap 2 --gpu-powertune -20,-20 --auto-fan --temp-target 65,65 --temp-overheat 85,85 --temp-cutoff 90,90 --gpu-memclock 1500,1500 --gpu-engine 1080,1080 --expiry 1 --scan-time 1 --queue 0 --no-submit-stale --thread-concurrency 8192 2013-12-22 20:16:37: Listener for "EAC0" started 2013-12-22 20:16:37: Running command: "C:\Miners\guiminer-scrypt_win32_binaries_v0.04\cgminer\cgminer.exe" --scrypt -u woutersteven.eac1 -p x -o stratum+tcp://eac.cryptominer.net:3403 --gpu-platform 1 -d 1 -w 256 -v 1 -I 13 -g 2 -l 1 -T --lookup-gap 2 --gpu-powertune -20,-20 --auto-fan --temp-target 65,65 --temp-overheat 85,85 --temp-cutoff 90,90 --gpu-memclock 1500,1500 --gpu-engine 1080,1080 --expiry 1 --scan-time 1 --queue 0 --no-submit-stale --thread-concurrency 8192 2013-12-22 20:16:37: Listener for "EAC1" started 2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:16:37] Started cgminer 3.1.0 2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:16:37] Probing for an alive pool 2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:16:38] pool 0 JSON stratum auth failed: (null) 2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] No servers were found that could be used to get work from. 2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] Please check the details from the list below of the servers you have input 2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers 2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] Pool: 0 URL: stratum+tcp://eac.cryptominer.net:3403 User: woutersteven.eac1 Password: x 2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] No servers could be used! Exiting. 2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:16:37] Started cgminer 3.1.0 2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:16:38] Probing for an alive pool 2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:16:39] pool 0 JSON stratum auth failed: (null) 2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] No servers were found that could be used to get work from. 2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] Please check the details from the list below of the servers you have input 2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers 2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] Pool: 0 URL: stratum+tcp://eac.cryptominer.net:3403 User: woutersteven.eac1 Password: x 2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] No servers could be used! Exiting. Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: MaGNeT on December 22, 2013, 12:23:03 PM Getting all excited for finding that first block ;D
Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: MaGNeT on December 22, 2013, 12:24:02 PM Not working for me, getting: 2013-12-22 20:16:37: Running command: "C:\Miners\guiminer-scrypt_win32_binaries_v0.04\cgminer\cgminer.exe" --scrypt -u woutersteven.eac1 -p x -o stratum+tcp://eac.cryptominer.net:3403 --gpu-platform 1 -d 0 -w 256 -v 1 -I 13 -g 2 -l 1 -T --lookup-gap 2 --gpu-powertune -20,-20 --auto-fan --temp-target 65,65 --temp-overheat 85,85 --temp-cutoff 90,90 --gpu-memclock 1500,1500 --gpu-engine 1080,1080 --expiry 1 --scan-time 1 --queue 0 --no-submit-stale --thread-concurrency 8192 2013-12-22 20:16:37: Listener for "EAC0" started 2013-12-22 20:16:37: Running command: "C:\Miners\guiminer-scrypt_win32_binaries_v0.04\cgminer\cgminer.exe" --scrypt -u woutersteven.eac1 -p x -o stratum+tcp://eac.cryptominer.net:3403 --gpu-platform 1 -d 1 -w 256 -v 1 -I 13 -g 2 -l 1 -T --lookup-gap 2 --gpu-powertune -20,-20 --auto-fan --temp-target 65,65 --temp-overheat 85,85 --temp-cutoff 90,90 --gpu-memclock 1500,1500 --gpu-engine 1080,1080 --expiry 1 --scan-time 1 --queue 0 --no-submit-stale --thread-concurrency 8192 2013-12-22 20:16:37: Listener for "EAC1" started 2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:16:37] Started cgminer 3.1.0 2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:16:37] Probing for an alive pool 2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:16:38] pool 0 JSON stratum auth failed: (null) 2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] No servers were found that could be used to get work from. 2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] Please check the details from the list below of the servers you have input 2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers 2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] Pool: 0 URL: stratum+tcp://eac.cryptominer.net:3403 User: woutersteven.eac1 Password: x 2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] No servers could be used! Exiting. 2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:16:37] Started cgminer 3.1.0 2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:16:38] Probing for an alive pool 2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:16:39] pool 0 JSON stratum auth failed: (null) 2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] No servers were found that could be used to get work from. 2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] Please check the details from the list below of the servers you have input 2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers 2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] Pool: 0 URL: stratum+tcp://eac.cryptominer.net:3403 User: woutersteven.eac1 Password: x 2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] No servers could be used! Exiting. try to change to: -o stratum+tcp://eac.cryptominer.net:3403 -u woutersteven.eac1 -p x ? :) Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: mac-coin on December 22, 2013, 12:37:11 PM so who's going to get the first block, lol
Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: torzsy on December 22, 2013, 12:52:40 PM Not working for me, getting: 2013-12-22 20:16:37: Running command: "C:\Miners\guiminer-scrypt_win32_binaries_v0.04\cgminer\cgminer.exe" --scrypt -u woutersteven.eac1 -p x -o stratum+tcp://eac.cryptominer.net:3403 --gpu-platform 1 -d 0 -w 256 -v 1 -I 13 -g 2 -l 1 -T --lookup-gap 2 --gpu-powertune -20,-20 --auto-fan --temp-target 65,65 --temp-overheat 85,85 --temp-cutoff 90,90 --gpu-memclock 1500,1500 --gpu-engine 1080,1080 --expiry 1 --scan-time 1 --queue 0 --no-submit-stale --thread-concurrency 8192 2013-12-22 20:16:37: Listener for "EAC0" started 2013-12-22 20:16:37: Running command: "C:\Miners\guiminer-scrypt_win32_binaries_v0.04\cgminer\cgminer.exe" --scrypt -u woutersteven.eac1 -p x -o stratum+tcp://eac.cryptominer.net:3403 --gpu-platform 1 -d 1 -w 256 -v 1 -I 13 -g 2 -l 1 -T --lookup-gap 2 --gpu-powertune -20,-20 --auto-fan --temp-target 65,65 --temp-overheat 85,85 --temp-cutoff 90,90 --gpu-memclock 1500,1500 --gpu-engine 1080,1080 --expiry 1 --scan-time 1 --queue 0 --no-submit-stale --thread-concurrency 8192 2013-12-22 20:16:37: Listener for "EAC1" started 2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:16:37] Started cgminer 3.1.0 2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:16:37] Probing for an alive pool 2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:16:38] pool 0 JSON stratum auth failed: (null) 2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] No servers were found that could be used to get work from. 2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] Please check the details from the list below of the servers you have input 2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers 2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] Pool: 0 URL: stratum+tcp://eac.cryptominer.net:3403 User: woutersteven.eac1 Password: x 2013-12-22 20:17:37: Listener for "EAC0": [2013-12-22 20:17:37] No servers could be used! Exiting. 2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:16:37] Started cgminer 3.1.0 2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:16:38] Probing for an alive pool 2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:16:39] pool 0 JSON stratum auth failed: (null) 2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] No servers were found that could be used to get work from. 2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] Please check the details from the list below of the servers you have input 2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers 2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] Pool: 0 URL: stratum+tcp://eac.cryptominer.net:3403 User: woutersteven.eac1 Password: x 2013-12-22 20:17:38: Listener for "EAC1": [2013-12-22 20:17:38] No servers could be used! Exiting. Should be working now. :) Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: HashHound on December 22, 2013, 12:59:49 PM Nice pool, thanks for putting it up.
Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: woutersteven on December 22, 2013, 01:05:39 PM It's working now. I'm guessing the worker wasn't ready yet. How long does it normally take for a worker after having been saved to be usable?
Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: mac-coin on December 22, 2013, 01:08:23 PM I had the same problem, took about 5-10 mins until it would start.
I still think the EAC/Day is a bit optimistic Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: torzsy on December 22, 2013, 01:12:27 PM It's working now. I'm guessing the worker wasn't ready yet. How long does it normally take for a worker after having been saved to be usable? It should be fast, max 1 min. Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: MaGNeT on December 22, 2013, 01:24:27 PM First block found, great payout! http://i.fok.nl/s/static.gif
Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: torzsy on December 22, 2013, 01:29:12 PM Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: mac-coin on December 22, 2013, 01:30:33 PM My works keep having to wait for work every 10mins or so
Anything you can do to fix Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: torzsy on December 22, 2013, 01:49:52 PM My works keep having to wait for work every 10mins or so Anything you can do to fix Will try it a bit later, I have to go away for an hour. Restarted stratum so you can connect with your new workers. Thanks! Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: MaGNeT on December 22, 2013, 02:40:55 PM Works great, we found another block ;D
Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: oudezeur on December 22, 2013, 09:07:22 PM hi,
i have a problem too with this pool. i think my worker does not get activated maybee? i have waited a few hours , checked my settings and retried a few times. i also get i message like this in cgminer: pool 0 JSON stratum auth failed: (null), is it me? Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: torzsy on December 22, 2013, 10:03:43 PM Daemon recompiled. Lets try this again.
Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: anitpool on December 29, 2013, 12:26:03 PM were did you get the fix? and what was fixed?? ???
Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: anitpool on December 29, 2013, 01:27:20 PM No support here... So i'll better mine @ earth.antisecurity.de (http://earth.antisecurity.de)
Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: torzsy on December 29, 2013, 01:36:57 PM No support here... So i'll better mine @ earth.antisecurity.de (http://earth.antisecurity.de) Have fun my friend. Its Sunday. You dont get answer after 1 hour and you are pissed off... No comment for this. :) Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: anitpool on December 29, 2013, 07:02:26 PM Oh sry. Sometimes i forget thet weekend :D
So.. how do you have fixed your bug? is your earthcoind vom gibthub? Title: Re: [ANN] EarthCoin pool launched with the !FIXED! daemon | Stratum only Post by: torzsy on December 29, 2013, 07:52:45 PM Oh sry. Sometimes i forget thet weekend :D So.. how do you have fixed your bug? is your earthcoind vom gibthub? Hehe, nevermind. No weekend for Bitcoin business. ;D Got the patch from Github https://github.com/earthcoinproject/earthcoin/commit/7cbbb807b39ba1dbf4394759d4c12721158b46c4 Cheers! |