Bitcoin Forum

Hi all,

Is it normal for me to get around 50% rejection from a pool? I mean I have been mining over a month and I don't normally get rejections more than 10%. And I'm not talking about hardware errors... Are rejections normally caused by a problem with my GPU or is it more of a pool problem?

Happy crimbo everyone :)

Anyone ?

??

you're getting 50% rejections ?? no thats not normal, i'm getting 3% rejections.

Do you get that on other pools too ? What does cgminer say when shares are rejected, why are they rejected ?

I will try another pool. Sometimes it is the pool.

I'm currently mining there, 1141 accepted, 23 rejected shares.

Thanks guys - I am back to netdogepool... seems about 7% now rejections wise. And what do you mean by what does CGMiner says? Where do I find what it is saying? I am only looking at the A: to R: ratio

That rejection rate does seem very high.

What hardware are you using to mine, what kh/s do you get?

Where are you located? Being further away from the pool may not help

A loaded pool may not help either. But, in saying that, 10% is high also.

I'm getting 0.4% rejection rate on my pool (doge.scryptlife.com)

I've tried several miners now, also different speeds and difficultys, but my rejection rate on dogepool.net is always < 1 %

I am using 5 x 7950, 1 x 7850 and 1x 7970 so total hash is around 4MH/s.

I ran http://doge.netcodepool.org/ last night for just over 12 hours and averaging around 3.5% rejection which is much more acceptable.