|
Title: Please Help - Lots of dead on P2Pool. Post by: Einewton on December 29, 2013, 05:31:02 PM I've been on P2Pool for only 5 days now, and in the last 24 hours I've received a surge of dead shares...
On the P2Pool wiki it states "Very high dead rates can indicate miner misconfiguration.".. Does anyone know what exactly it means by mis-configuration? When setting my miners up, I try to keep the rejected shares under 7% and if it get's higher than that i'll lower the intensity. Is there anyone here that has experience with P2Pool to help me out? My earnings has tanked as you can see in my earnings graph: https://i.imgur.com/VlSQcmU.png Here is my P2Pool info: Local rate 7.66MH/s (8.8% DOA) Expected time to share 0.601 hours (36.1 minutes) Shares 135 total (12 orphaned, 10 dead) Efficiency: 98.35% Payout if a block were found NOW 0.2229656LTC Pool rate 1.53GH/s (15% DOA+orphan) Share difficulty 3.86 Node uptime 4.533 (108.790 hours) Peers 6 out, 7 in Current block value 50.259LTC Expected time to block 2.23 hours Title: Re: Please Help - Lots of dead on P2Pool. Post by: Aldur1 on January 28, 2014, 04:28:25 PM have you tried adding a /x after the username address,
you can refer to this handy post for optimising your setup https://bitcointalk.org/index.php?topic=153232.0 Title: Re: Please Help - Lots of dead on P2Pool. Post by: semaster on January 28, 2014, 07:27:50 PM what hardware/software do you use?
Title: Re: Please Help - Lots of dead on P2Pool. Post by: Aldur1 on January 30, 2014, 10:52:38 AM I have the following hardware:
I use a variety of differnt versions of CGMiner depending on the hardware and p2pool |
