Bitcoin Forum

The package will cost $50(v1 H-board) + $5.5*18(some BF chips throw MISO errors right out of the reel) + $60 (regulator) = ~$209e.a.
Assembled boards will cost ~$75 extra e.a.

BYOC is also possible.

Guys anyone interested in a group buy? If yes please let me know on this thread how many. You will have to solder the chips yourself, it's easy if you know how to solder a QFN. You need some solder paste + hot air + solder iron for the contacts.

QikFury boards-> https://bitcointalk.org/index.php?topic=391689.0

Estimated delivery 3rd Week February 2014.

Interested in 1 or 2 kits. Each board does approx ~35Gh/s correct?

Yes on an average speed's 35GH/s. The minimum observed speed is 32GH/s (if two chips throw errors). Some cards with 16 good chips run at 37GH/s.

If this happens in the near future I will purchase 16 - 17 kits.

Would one of theses boards need anything else to connect to pc. Do they have USB for cgminer

I would take 30 kits if available soonish.

Interested for 2 boards.

I would be interested in 3 kits, assembled ideally

+1

What are the additional components needed to start hashing, if any...

Minimum 4 kits BMOC
A couple additional full kits possible to round things out.

I am going to pretend like I know what I'm talking about here and say:
"Will you be providing a source for the backplane?"

--------------------------------------------------------------------
Public Service Announcement:
Soldering a QFN: http://store.curiousinventor.com/guides/Surface_Mount_Soldering/QFN/ (http://store.curiousinventor.com/guides/Surface_Mount_Soldering/QFN/)

Interested in 1 kit provided there will be more info about what is exactly needed to make it hash

- Are you in the US? (checking to see shipping costs)

New to this so these may be very basic questions:
- What's the Power usage on this 16 chip board?
- Can you have more than 16 chips on one board too? I was thinking that, spending $100+ on 16 chip board only may be expensive by feb-end.

I want 5 boards, with assembly and chips. Ready to run.

Interested in 2-3 packs, depending on the final price, ideally all assembled to connect  ;) ;)

Shipping to Europe?

Thanks

Hi goxed I would be interested in 3 kits and assembled  ;)

Thanks

+5 Kit here.
Shipping abroad?

Tough to be worth it if these are mailed out late Feb. Any chance of getting them out sooner?

Depends, which country? Thanks

It all depends on the chip release schedule, which is currently no earlier than mid-february.

anything?

Shipping to EU should be possible. Assembly here implies that the chips will be soldered, Voltage regulator needs to be soldered by the user. Should not take more than 10mins per card.

These are functionally similar and slightly better thermally, to Bitfury v1 H-boards and need an M-board to make them operational. The default power usage and speed can be looked up in the link provided in the first post.
>16 chips / board is not supported right now.
Thanks.

I've seen M-board kits and complete boards around the forum but have not noticed anything particularly recent.

Do you expect to have M-boards available?
Or have a known source for them?

So even when buying complete units we would have to solder on the chips ourselves? If not, I would be interested in 4-6.

Interested in at least one kit, maybe more.

I would be interested in 3 to 4 boards.

Hi goxed, some questions  ;) ;)

¿The M-board would be included in the kit? ¿goes out the kit? How much $$$$

that power supply would need?

would need anything more to start mining?

Thanks goxed, good job... impatient for more news

Hi - I have separately purchased a LOT of 500 BF chips.  So I would like to get 32 of these made up.  Can you let me know the price if I supply the chips I have?

Intersted in 2 kits for sample order (1 assembled and 1 not assembled) preferrably with soldering instruction or outsourcing soldering company contact.

question is, "when"?

i would take 32 Boards (1TH) but that would need to be done until February
after that, at least 3 of the TH-vendors will be shipping out a lot cheaper

Would be interested in a small quantity. Interested in QF blank board + Vregulator,
are you talking about just the VRegulator chip or the chip + components? As part
of a "kit" of components or soldered to PCB? I also have BF chips on order, so I don't necessarily
want or need the chips unless yours would show up before mine (paid Reel #1 GB).
Of course, having extra is fine, but not if that delays getting the kit(s).

Strong interest in 4 DIYs, the hobbiest in me cant resist.

Hi goxed,

Any news?

Thanks

Next update will be when Bitfury chips go on sale. Thanks for your interest.

Thanks goxed, sorry for my insistence  ;D ;D

Np man :) ;)

We will need MB planes, and Heatsinks, those big ones :)

Ordering just the board, how long time do you think it will take? I have ordern some chips in the other group buy for chips to

For all of you that need chips - please see the opportunity to buy them here;

https://bitcointalk.org/index.php?topic=396536.0

Probably the last group buy for a while.

I interesting for 4 board

This got my attention... What's up... DIY all day.

4-8? :)

I am very interested. Count me in for a few boards if you can do discount on assembly to be competitive against the MegaBigPower pricing

I am very interested too.

Boards:                  4/5
Shipp cost EU:         ?
Discount assembly:   ?

 :)

where can i order i would be down to buy these :D

How are things looking? Should I put aside some money for this? Any idea on an ETA?

Hi Goxed - Could I get 16 assembled boards where I supply the chips?  Pm me if so.

Also interested in 4/5...

Please keep the post update

I am also interested for 3-4 kits.  ::)

interested...,hope you bring the price down a little bit...
for the sweet spot  ;)