|
Title: New gpu build--need mobo help for 1150 Post by: note235 on January 12, 2014, 05:19:46 AM 1150 build and would like to use 3-4 gpus.
I'm currently looking at these mobos http://www.newegg.com/Product/Product.aspx?Item=N82E16813135365 or http://www.newegg.com/Product/Product.aspx?Item=N82E16813130727 Will be using USB3 powered 1x risers Any suggestions for mobos without requiring use of jumper cables? Title: Re: New gpu build--need mobo help for 1150 Post by: repairguy on January 12, 2014, 05:35:27 AM If by jumpers your mean the presence pin on the pci-e, the 3.0 usb risers should already have the presence pin connection built in.
Title: Re: New gpu build--need mobo help for 1150 Post by: note235 on January 12, 2014, 04:34:56 PM oh nice
so I can use both the x16 and the x1 slots without shorting the board? Title: Re: New gpu build--need mobo help for 1150 Post by: crazyates on January 12, 2014, 05:22:28 PM https://bitcointalk.org/index.php?topic=410006.msg4460888#msg4460888
Title: Re: New gpu build--need mobo help for 1150 Post by: repairguy on January 12, 2014, 08:43:01 PM Yes, but there are 2 different styles of pci-e 3.0 risers. The ones with the connector going off the back will not fit in a 16x slot. Be sure to buy the ones that have the connector off of the top.
Title: Re: New gpu build--need mobo help for 1150 Post by: note235 on January 13, 2014, 08:17:54 AM Yes, but there are 2 different styles of pci-e 3.0 risers. The ones with the connector going off the back will not fit in a 16x slot. Be sure to buy the ones that have the connector off of the top. like this correct? http://www.ebay.com/itm/PCI-e-express-1X-to-16x-Powered-Riser-Card-100cm-USB-3-Cable-for-Litecoin-miner-/331103416817?pt=LH_DefaultDomain_0&hash=item4d174d31f1 thanks! Title: Re: New gpu build--need mobo help for 1150 Post by: repairguy on January 13, 2014, 09:23:25 PM Yes, That one will fit in a 1x or 16x slot.
|