|
Title: Overclock Question Post by: DC4Life on January 14, 2014, 01:07:16 AM I am brand new to mining and see a lot about overclocking. I am using AntMiner U1 on Bitminter.
How do you overclock your AntMiner? Do I need to change my mining program? Thanks! Title: Re: Overclock Question Post by: Gingermod on January 14, 2014, 02:32:26 AM Your GPU should come with OC capable software, just right click your desktop.
Title: Re: Overclock Question Post by: Ragnorak on January 14, 2014, 04:18:58 AM Depending on what card you have or if you have a aftermarket one at all, you should have software to OC your GPU. If you have a ATI card you should be able to right click your mouse and see the catalyst software to do it that way. Same way if you have a Nvidia card but theirs is not called catalyst. You can always do it in the BIOS too, when you boot your PC it will list the functions of how to go into BIOS. For example I have a Gigabyte mobo and I hit Del on keyboard to go into BIOS. I OC all my hardware in BIOS, sometimes software is not that accurate. So I use just use the BIOS, no need to install software to OC!
Title: Re: Overclock Question Post by: poolers on January 14, 2014, 05:48:46 AM Make sure to keep a close eye on your miner after setting your OC. You are likely to experience a driver or system crash a couple times while you get the right clocks and voltage settings figured out. You don't want to come back the next day to realize your miner has been idle all day. Good luck!
Title: Re: Overclock Question Post by: DC4Life on January 14, 2014, 07:04:10 PM Thank you for the replies. I am not using a GPU. I am using an AntMiner ASIC USB attached to a USB hub attached to my laptop. Do I still have to tweak the GPU for that?
|