|
Title: HELP! Newbie error with blade v2.. Post by: shoag1 on January 17, 2014, 08:08:34 AM Ok so i have a problem that hopefully is an easy fix...
I have an asic blade v2 that I've had up and running for the last 2 months, today i went to change some settings to switch pools and now i can no longer access the blades configuration page. Heres an explanation of what i changed in the settings; Originally: Primary DNS : 192.1.168.1.1 Secondary DNS : 211.148.192.141 Changed to: Primary DNS: 0.0.0.0 Secondary DNS: 0.0.0.0 I also changed the pool address and username/password, but i'm pretty sure that is not the problem. Any help would be greatly appreciated! Title: Re: HELP! Newbie error with blade v2.. Post by: HappyMinerMan on January 17, 2014, 08:24:15 AM Your blades can no longer connect to your router. You can reset it back to default settings by i believe connecting the 3 and 4 jumper with a paperclip. Google it. Happy Mining!
Title: Re: HELP! Newbie error with blade v2.. Post by: shoag1 on January 17, 2014, 09:20:54 AM The reset points are 1,2 and 3. I believe im supposed to bridge 1 and 3, but i tried that with no success... The blade shows up on my router as still having the 192.168.1.200 address i assigned to it.
Title: Re: HELP! Newbie error with blade v2.. Post by: shoag1 on January 17, 2014, 07:58:10 PM Anyone? I need help!
Title: Re: HELP! Newbie error with blade v2.. Post by: shoag1 on January 17, 2014, 08:55:50 PM SUCCESS! My dumbass was bridging points 1 and 3 not 2 and 3... *facepalm*
|