Title: cgminer+openwrt+antminer+block erupter Post by: alzhao on January 18, 2014, 04:20:28 AM Hi all,
I compiled cgminer for openwrt to support USB antminer and block erupter. Both can be download here. You can use the firmware on our smart router GL.iNet or on TP-link 720n, 703n etc. The cgminer works with Block Erupter perfectly with hot plug and play support. While for Antminer, there is a bug, when start cgminer as daemon or hot plug scripts, it will take 100% cpu. So better to start in terminal or reboot the devices, which will not have the issues. The source code is here: https://github.com/alzhao/openwrt-cgminer-antminer, hope someone can find the bug. To use antminer, check this instruction: http://www.gl-inet.com/w/?p=336&lang=en You can also flash the firmware provide from https://github.com/AntMiner/AntGen1/tree/master/firmware to GL.iNet smart router easily using the uboot web interface. But I cannot get it work with the USB ant miner. I didn't test multiple devices with usb hub, as I only have one block erupter and one usb ant miner. http://www.gl-inet.com/w/wp-content/uploads/2014/01/Screenshot-from-2014-01-16-203052.png http://www.gl-inet.com/w/wp-content/uploads/2014/01/0116_1.jpg http://www.gl-inet.com/w/wp-content/uploads/2014/01/0116_2.jpg http://www.gl-inet.com/w/wp-content/uploads/2014/01/manual_cgminer.png Title: Re: cgminer+openwrt+antminer+block erupter Post by: alzhao on February 16, 2014, 04:25:22 PM Recompiled with USB 1.1 patch, you can do mining with WiFi on.
Download from http://www.gl-inet.com/w/?page_id=115 |