|
Title: Problems with cgminer (AdvancedStyle & Bitmaintech version) for Bitmain on RPi Post by: OliRS on January 20, 2014, 10:18:43 PM Hi everyone, I'm new to the forum. I did a search but was unable to find the error I'm having.
I have installed the original version of cgminer from the original author onto my Rev 2 B RPi and it runs fine. However, I wanted to install the version by AdvancedStyle or Bitmaintech to enable support to Overclock the Bitmain Antminer U1 I currently own. I followed the build instructions using their git repos, i.e. ./autogen.sh # only needed if building from git repo CFLAGS="-O2 -Wall -march=native" ./configure --enable-bmsc make It goes fine until a few minutes in using make I get this error: Quote CC cgminer-usbutils.o usbutils.c:304:26: error: redefinition of ‘ica_epinfos’ usbutils.c:242:26: note: previous definition of ‘ica_epinfos’ was here usbutils.c:309:27: error: redefinition of ‘ica_ints’ usbutils.c:247:27: note: previous definition of ‘ica_ints’ was here usbutils.c:313:26: error: redefinition of ‘amu_epinfos’ usbutils.c:251:26: note: previous definition of ‘amu_epinfos’ was here usbutils.c:318:27: error: redefinition of ‘amu_ints’ usbutils.c:256:27: note: previous definition of ‘amu_ints’ was here usbutils.c:322:26: error: redefinition of ‘llt_epinfos’ usbutils.c:260:26: note: previous definition of ‘llt_epinfos’ was here usbutils.c:327:27: error: redefinition of ‘llt_ints’ usbutils.c:265:27: note: previous definition of ‘llt_ints’ was here usbutils.c:331:26: error: redefinition of ‘cmr1_epinfos’ usbutils.c:269:26: note: previous definition of ‘cmr1_epinfos’ was here usbutils.c:336:27: error: redefinition of ‘cmr1_ints’ usbutils.c:274:27: note: previous definition of ‘cmr1_ints’ was here usbutils.c:340:26: error: redefinition of ‘cmr2_epinfos0’ usbutils.c:278:26: note: previous definition of ‘cmr2_epinfos0’ was here usbutils.c:344:26: error: redefinition of ‘cmr2_epinfos1’ usbutils.c:282:26: note: previous definition of ‘cmr2_epinfos1’ was here usbutils.c:348:26: error: redefinition of ‘cmr2_epinfos2’ usbutils.c:286:26: note: previous definition of ‘cmr2_epinfos2’ was here usbutils.c:352:26: error: redefinition of ‘cmr2_epinfos3’ usbutils.c:290:26: note: previous definition of ‘cmr2_epinfos3’ was here usbutils.c:357:27: error: redefinition of ‘cmr2_ints’ usbutils.c:295:27: note: previous definition of ‘cmr2_ints’ was here make[2]: *** [cgminer-usbutils.o] Error 1 make[2]: Leaving directory `/home/pi/cgminer' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/pi/cgminer' make: *** [all] Error 2 I get this exact same error with the AdvancedStyle version and the Bitmaintech version, both from github. I have searched and can't find an answer. I thought maybe it was a dependency issue, but I'm pretty sure I have all the required packages. Any help would be appreciated. Thanks in advance, Oli. Title: Re: Problems with cgminer (AdvancedStyle & Bitmaintech version) for Bitmain on RPi Post by: Bigun on January 21, 2014, 05:19:46 PM I'm having the exact same issue.
Title: Re: Problems with cgminer (AdvancedStyle & Bitmaintech version) for Bitmain on RPi Post by: OliRS on January 21, 2014, 10:38:51 PM I'm having the exact same issue. OK so update: I used "make -j 6" instead of just make and it works. That was advised by the author of the AdvancedStyle repo but it's not in the README :-/ Anyway, I found a better repo https://github.com/fractalbc/cgminer It has the bmsc drivers merged into a 3.9.0 version of cgminer and it also now supports my Adafruit I2C LCD screen which didn't work with AdvancedStyle or bitmaintech's version's as they altered the api. Happy days. See here for details: https://bitcointalk.org/index.php?topic=390929.msg4379693#msg4379693 Title: Re: Problems with cgminer (AdvancedStyle & Bitmaintech version) for Bitmain on RPi Post by: nwoolls on January 21, 2014, 10:53:48 PM Anyway, I found a better repo https://github.com/fractalbc/cgminer It has the bmsc drivers merged into a 3.9.0 version of cgminer and it also now supports my Adafruit I2C LCD screen which didn't work with AdvancedStyle or bitmaintech's version's as they altered the api. You can also use the official, latest version of bfgminer which has support for the AntMiner U1 and many other devices. No custom forks required. Title: Re: Problems with cgminer (AdvancedStyle & Bitmaintech version) for Bitmain on RPi Post by: Bigun on January 30, 2014, 12:45:32 PM Anyway, I found a better repo https://github.com/fractalbc/cgminer It has the bmsc drivers merged into a 3.9.0 version of cgminer and it also now supports my Adafruit I2C LCD screen which didn't work with AdvancedStyle or bitmaintech's version's as they altered the api. You can also use the official, latest version of bfgminer which has support for the AntMiner U1 and many other devices. No custom forks required. That's the solution I went with. With a few API flags turned on, it will work with PiMiner as well. Title: Re: Problems with cgminer (AdvancedStyle & Bitmaintech version) for Bitmain on RPi Post by: Buchi-88 on January 30, 2014, 01:13:31 PM Anyway, I found a better repo https://github.com/fractalbc/cgminer It has the bmsc drivers merged into a 3.9.0 version of cgminer and it also now supports my Adafruit I2C LCD screen which didn't work with AdvancedStyle or bitmaintech's version's as they altered the api. You can also use the official, latest version of bfgminer which has support for the AntMiner U1 and many other devices. No custom forks required. But with the official Cgminer overclocking is NOT possible at the Antminer U1, but the costum Cgminer version is not stable 24/7 :'( greets Title: Re: Problems with cgminer (AdvancedStyle & Bitmaintech version) for Bitmain on RPi Post by: nwoolls on January 30, 2014, 01:25:47 PM But with the official Cgminer overclocking is NOT possible at the Antminer U1, but the costum Cgminer version is not stable 24/7 :'( Note I said bfgminer, not cgminer. cgminer has no support for the AntMiner U1. bfgminer supports it fully, including over-clocking and running side-by-side with Block Erupters. Title: Re: Problems with cgminer (AdvancedStyle & Bitmaintech version) for Bitmain on RPi Post by: Buchi-88 on January 30, 2014, 03:14:32 PM You are right, sorry!
But the new CGMiner 3.12.0 also support the Antminer without overclocking ;) Title: Re: Problems with cgminer (AdvancedStyle & Bitmaintech version) for Bitmain on RPi Post by: OliRS on February 13, 2014, 10:41:20 PM Thanks for the replies guys, I did indeed go with the latest Bfgminer in the end and not only does it work "out of the box" with the Antminers I am also getting a steady 2.0 GH/s out of all of them with literally no hashing errors. Using the 2.2 (0A81) clock speed gives many errors but I'll take a steady 2.0 any day.
Just added a ASICMiner Cube to my mix too, works fine on low clock but won't mine when I switch to high clock, it just hangs for a while then I get all X's in the status page and have to power cycle it to get it mining again happily at 32 GH/s. |