Title: Newbie setup Avalon Asic problems. Post by: hotmail6 on January 21, 2014, 03:51:59 AM I have recently brought an Avalon 200GHz/s. I managed to setup and get started my status is Álive, but I have 0 accepted and 0 rejected with usually about 4 discarded. Also no fan speed and temp feedback.
Ive been trying different IP combinations for a couple of days now with no luck, my gateway is standard 192.168.0.1. I have a DLink DSL-2730B router that it is plugged into. Has anyone had any similar problems/offer any help? Title: Re: Newbie setup Avalon Asic problems. Post by: pjcltd on January 21, 2014, 03:37:26 PM what pool setting have you setup ?
Title: Re: Newbie setup Avalon Asic problems. Post by: hotmail6 on January 21, 2014, 04:33:03 PM Pool setting?
Title: Re: Newbie setup Avalon Asic problems. Post by: pjcltd on January 21, 2014, 04:51:21 PM Pool setting? ok on the web interface for your miner there is a section for cgminer setup what have you got on each line Title: Re: Newbie setup Avalon Asic problems. Post by: hotmail6 on January 21, 2014, 07:23:12 PM Stratum+tcp://us1.EclipseMc.Com:3333
Hotmail6 And no password + I have run through this setup enough times that I'm only filling in pool at the moment. Failover Chip frequency (set to default 274? I'm at work so not sure) Miner count 24 Apr allow W:127.0.0.1 --quiet Title: Re: Newbie setup Avalon Asic problems. Post by: pjcltd on January 21, 2014, 08:43:28 PM Stratum+tcp://us1.EclipseMc.Com:3333 ok if the info you posted is Hotmail6 And no password + I have run through this setup enough times that I'm only filling in pool at the moment. Failover Chip frequency (set to default 274? I'm at work so not sure) Miner count 24 Apr allow W:127.0.0.1 --quiet right then thats not going to work any chance you can do a screen shot ? Title: Re: Newbie setup Avalon Asic problems. Post by: hotmail6 on January 21, 2014, 11:37:10 PM Title: Re: Newbie setup Avalon Asic problems. Post by: pjcltd on January 22, 2014, 06:19:37 AM ok try just putting in
us1.EclipseMc.Com:3333 on the first line Title: Re: Newbie setup Avalon Asic problems. Post by: hotmail6 on January 22, 2014, 08:10:26 AM Still the same. My status is alive but no blocks accepted.
Title: Re: Newbie setup Avalon Asic problems. Post by: pjcltd on January 22, 2014, 08:14:43 AM Still the same. My status is alive but no blocks accepted. where are you from ? do you have team viewer installed ? Title: Re: Newbie setup Avalon Asic problems. Post by: hotmail6 on January 22, 2014, 08:21:12 AM In Australia, just installing team view.
Title: Re: Newbie setup Avalon Asic problems. Post by: pjcltd on January 22, 2014, 08:27:20 AM In Australia, just installing team view. ok cool send me a PM with the connection info and i will jump on and have a look for you. Title: Re: Newbie setup Avalon Asic problems. Post by: studio1one on January 22, 2014, 11:17:40 AM Miner count needs to be 16 for 200g With avalon 55nm chips but it sounds like a network issue.
Title: Re: Newbie setup Avalon Asic problems. Post by: -ck on January 22, 2014, 01:38:11 PM Speed for 55nm chips should be 1500 and you should have firmware that shows the 55/110nm option so something's horribly wrong with your setup if you're running firmware not designed for it at speeds it doesn't support.
Title: Re: Newbie setup Avalon Asic problems. Post by: studio1one on January 22, 2014, 02:28:49 PM Yup. Firmware is wrong version, for older miner
CGMiner config page should look like this https://ip.bitcointalk.org/?u=http%3A%2F%2Fi44.tinypic.com%2F6tl5qd.jpg&t=536&c=LcJTTrnYAai3uA sorry you are going to have to paste the address into your browser because I can't hotlink it. Title: Re: Newbie setup Avalon Asic problems. Post by: hotmail6 on January 22, 2014, 03:46:41 PM Rhito. I'm working nights for the next couple of days so won't get much time on it. I'll have to roll back the firmware. Any idea which revision you have linked above?
Title: Re: Newbie setup Avalon Asic problems. Post by: studio1one on January 22, 2014, 04:05:07 PM 20131123
Title: Re: Newbie setup Avalon Asic problems. Post by: studio1one on January 22, 2014, 04:06:36 PM https://github.com/BitSyncom/cgminer-openwrt-packages
Title: Re: Newbie setup Avalon Asic problems. Post by: hotmail6 on January 22, 2014, 05:43:32 PM Beauty. Thanks ill give it a shot when I get home.
Title: Re: Newbie setup Avalon Asic problems. Post by: hotmail6 on January 24, 2014, 10:38:13 AM My firmware version is : 20130923
I have downloaded, so how do I go about installing the packages? Title: Re: Newbie setup Avalon Asic problems. Post by: hotmail6 on January 24, 2014, 01:54:33 PM Well I gave up yesterday morning after I thought I had bricked it.
All done with work for a few days so decided to have another crack at it. It was the firmware, updated to 20131229. I new I was looking for an image file just wasn't sure where to start. Linked from https://en.bitcoin.it/wiki/Avalon#20131229 to http://downloads.canaan-creative.com/software/avalon/20131229/openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-sysupgrade.bin (http://downloads.canaan-creative.com/software/avalon/20131229/openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-sysupgrade.bin) Thanks for the help guys. Title: Re: Newbie setup Avalon Asic problems. Post by: studio1one on January 24, 2014, 02:35:05 PM Nice one, pleased to hear it is working well for you.
Title: Re: Newbie setup Avalon Asic problems. Post by: ThC420 on February 09, 2014, 02:45:17 AM Speed for 55nm chips should be 1500 and you should have firmware that shows the 55/110nm option so something's horribly wrong with your setup if you're running firmware not designed for it at speeds it doesn't support. Thanks Mr.Ckolivas, it was very helpfull for me! i was trying 282 and 110nm and connection refused error on the api log, now im running 1400 and 55nm and its mining at 149ghz and 66° celsius because its too hot here in Brazil is summer now... The machine is a Avalon Clone 200Ghz from China, now i will try to reach the 200ghz, you give me da light at the end of tunnel...Thx Ckolivas! :D ;D Happy mining for all! |