Bitcoin Forum

** SOLD ** SOLD ** SOLD

AVALON 2nd Gen 55NM CHIPS
Overclock Estimate: 220GH/s +/- 10%
CASE SIZE: 43.5*44.1*16.2cm
WEIGHT: 18kg
POWER: 600W Dual Power
QUANTITY: 160pcs /2 Modules
Typical: 1.2-1.4 GH/s at a standard 0.9V, with 2.05W pre GHs.

Imported from China now available shipping from the Netherlands. Runs stable at 200 to 216 GH/s (no overclock settings) at ±35 to 37 degrees Celcius with these settings:

    Target Temperature : 60
    Overheat Cut Off Temperature : 70
    More Options : –avalon-fan 50
    Enviroment temp = ± 17 degrees Celcius (in a basement)

There is a TP-Link module inside with Openwrt software, you can use Wifi to connect to the device and internet or Rj-45 Wired connection. Easy setup thru webinterface.

Please notice this device makes quiet some noise. You can reduce noise with the cgminer option –quiet but this will increase the operating temperature of the device. Poper cooling is essential for this device. You some knowledge of (bitcoin)miners and networksetting. Sold as is, no warranty.

You can mine any SHA-256 coin with this device like: Bitcoin (BTC), Peercoin (PPC), Terracoin (TRC), Unobtanium (UNO), eMark (DEM), Namecoin (NMC), Betacoin (BET), Zetacoin (ZET), ASICcoin (ASC) and more…

More info about the Avalon 2 miner design and setup:  http://en.bitcoin.it/wiki/Avalon2 (info on this website not exactly this miner, the BTMine 200Ghs is based on this design)

Reason for sale is that I have 2 of them but running them both is too much noise (my wife doesn't like the noise  ;D), 1 is for sale now.

I can ship (from the Netherlands) within 1, max 2 days. Standard international shipping 40 euro, express please contact me.
Local pick up is also possible.

http://www.welcometothebitcoinshop.com/wp-content/uploads/2014/01/btmine200ghs01.jpg

1.4 btc I pay shipping and escrow.

Sorry, that offer is too low.

No problem. I was just being realistic.

Good luck with the sale. ;)

With just over 2w per GHs that makes the unit 440w? Is there a reason for duel 600WPSU's?

There are two boards in the machine, each board has a 600W powersupply. It draws ±900W from the wall.

I would love to pick this up :) in NL aswell, but not for 2200 euro's since we all know we can get an antminer @ 200gh/s for 1.9 btc and maybe even cheaper after 8 febr, and only takes 550w max.

I'll offer 1.8

Laat maar weten ;)

Sorry 1.8 BTC is too low either. I know you can get an antminer for 1.9BTC, but you can save your precious BTC and pay with Euro for this one, I think that is an advantage. And if you order from China you have to pay Import Tax (about 3 to 4%), handeling fee and VAT (BTW 21%).

Lol that is kinda bullshit... why should it matter to pay with btc?
No advantage on paying with normal currency or bitcoin.
Also most china suppliers can help a bit lowering the tax and import ;)

But good luck with your sale.

For diehard-bitcoinminers it's bullshit indeed, but for starters who don't have any BTC it's an advantage  ;D

regarding help from china with lowering tax, China did help filling in $150 on customs paper but Dutch Customs did an extra check on the package and didn't accept the item-value of $150 and charge 21% TAX + import tax over $1000. So be aware, it seems that (Dutch) customs are doing extra check(s) on (large) package from China that might have to do with Bitcoin. Bastards  >:(

2 Btc. pick up this week

Sorry, 2 BTC is too low. Think 2.666+  ;D

lol

dream on dude, antminers are 1.45 BTC and they do 200 GH ... ;)

Do they ship now within 1 day from EU ? think not...

Ants are shipping in 10 days. You are foolish not to take the 2BTC offered right now.

Everyday that goes by it will get lower.

added a video: https://vimeo.com/85469209

SOLD . Topic can be locked