Bitcoin Forum

Other => CPU/GPU Bitcoin mining hardware => Topic started by: finlof on January 29, 2014, 02:54:28 PM



Title: KNC Jupiter Beaglebone and controller board needed!
Post by: finlof on January 29, 2014, 02:54:28 PM
I purchased a unit from someone that was DOA (see picture below). They will not take it back (I'm pursuing legal action). The problem is with the chip right above the 4-pin molex power connector JP1, and next to the fan power JP2. Is there anyone that has a spare controller and BBB handy so I can get this unit hashing asap? I have to send both off to KNC for RMA, but we all know that will take a while and time is lost BTC! I will pay for expedited shipping to myself and back once I receive the RMA. I would also pay some $ or BTC for your troubles.

http://forum.kncminer.com/filedata/fetch?id=28958


Title: Re: KNC Jupiter Beaglebone and controller board needed!
Post by: CeeCee on January 29, 2014, 02:56:30 PM
i suggest to buy a cheap mercury or saturn and use your boards on this device. for the beaglebone you can use any of them and load the knc sd image onto them. or ask knc if they can sell you just the controller board.


Title: Re: KNC Jupiter Beaglebone and controller board needed!
Post by: finlof on January 29, 2014, 03:22:45 PM
i suggest to buy a cheap mercury or saturn and use your boards on this device. for the beaglebone you can use any of them and load the knc sd image onto them. or ask knc if they can sell you just the controller board.

no "cheap" saturn/mercury/jupiter out there that i know of.  i have asked KNC what they can do about selling me just the board, or advanced rma / cross-ship.  waiting to hear back.


Title: Re: KNC Jupiter Beaglebone and controller board needed!
Post by: finlof on January 29, 2014, 04:17:22 PM
good news is that you dont need to be the machine's original owner to do the RMA.  bad news is they dont do advanced RMA or cross-shipping.  the quote below is from Kurt on the KNC forum.

edit - bad news is that is still time (and consequently money) lost without being able to hash.

 Originally posted by Kurt View Post
Hi Guys, The warranty in fact belongs to the machine, so if you have the machine, you have the warranty. Unfortunately, we do not allow cross shipping. We can only issue you with a replacement when we have received your faulty parts.


Title: Re: KNC Jupiter Beaglebone and controller board needed!
Post by: 1l1l11ll1l on January 29, 2014, 06:46:00 PM
good news is that you dont need to be the machine's original owner to do the RMA.  bad news is they dont do advanced RMA or cross-shipping.  the quote below is from Kurt on the KNC forum.

edit - bad news is that is still time (and consequently money) lost without being able to hash.

 Originally posted by Kurt View Post
Hi Guys, The warranty in fact belongs to the machine, so if you have the machine, you have the warranty. Unfortunately, we do not allow cross shipping. We can only issue you with a replacement when we have received your faulty parts.

It's typically a 1 week turn around. Better than a kick in the teeth.


Title: Re: KNC Jupiter Beaglebone and controller board needed!
Post by: finlof on January 29, 2014, 08:36:17 PM

It's typically a 1 week turn around. Better than a kick in the teeth.

true true.  I sent it off today and it should get to them by friday.  hopefully the turnaround will be quick.  still would be interested to find a board to rent in the meantime.


Title: Re: KNC Jupiter Beaglebone and controller board needed!
Post by: finlof on January 30, 2014, 07:31:45 PM
anyone?


Title: Re: KNC Jupiter Beaglebone and controller board needed!
Post by: finlof on February 01, 2014, 03:25:21 AM
shipped it to them wed, they received it today and sent me out a new one same day.  i should receive the replacement monday.  great customer service!