|
Title: MSI R9 290 Post by: bronx1910 on January 29, 2014, 08:23:42 PM Hi guys, I am new in mining, from 1 day, and I have 2x MSI R9 290 with cgmining parameters:
lookup-gap 2 --auto-fan --gpu-engine 1000 --gpu-memclock 1500 -w 512 -v 1 -I 20 -g 1 and I can't get hash rate over 800/810Kh/s on each card. Is there anything that I missed in cgmining config or this is the max of these GPU's? Title: Re: MSI R9 290 Post by: vpasic on January 29, 2014, 08:30:24 PM That's it.
Title: Re: MSI R9 290 Post by: bronx1910 on January 29, 2014, 08:31:46 PM So I think I fucked up because there are much cheaper video cards, that get the same hash rate is it?
Title: Re: MSI R9 290 Post by: vpasic on January 29, 2014, 08:55:55 PM Well, bunch of people say, 7950 are best price:Kh/s ratio.
In your case, you are not far away from truth. Title: Re: MSI R9 290 Post by: bronx1910 on January 29, 2014, 09:12:44 PM Thanks man!
Title: Re: MSI R9 290 Post by: mrmork666 on January 29, 2014, 09:35:23 PM setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1 cgminer --scrypt -o xx -u user.worker -p xx -I 20 -g 1 -w 512 --thread-concurrency 32765 --lookup-gap 2 --gpu-powertune 11 --auto-fan --gpu-engine 990 --gpu-memclock 1500 Try this as .bat file has been reported to give 870kh/s https://docs.google.com/spreadsheet/ccc?key=0ApyK2Y6kDbKidEN2LXpCdDBTRlZPMUN6VHRWc2ROUUE&usp=sharing#gid=0 http://www.overclock.net/t/1437876/290-and-290x-litecoin-mining-performance Title: Re: MSI R9 290 Post by: bronx1910 on January 29, 2014, 10:19:42 PM Thanks I will try and share the result.
Title: Re: MSI R9 290 Post by: bronx1910 on January 31, 2014, 09:56:37 PM I do this config:
-lookup-gap 2 --auto-fan --gpu-engine 1025 --gpu-memclock 1500 -w 512 -v 1 -I 20 -g 1 --thread-concurrency 24550 --auto-fan --temp-target 80 --gpu-powertune 20 And I got stable 915KH/s 80C and 3800-4200RPM (68%) Fan speed. Title: Re: MSI R9 290 Post by: mannyg on May 16, 2014, 05:25:31 PM I have been mining with these cards for about 2 months and I can tell you that a number of these configs shown above are not optimal.
#1. the -w 512 setting. That just proved to give a higher stale rate. Lower it to the default 256 #2. the -gpumemclock at 1500 is too high for this card. Keep it at 1250. #3. the -gpupowertune works ok at 20, but it can be pushed to 50 with MSI AB. I saw my card push over 900KH/s when I did the powertune to 50 in AB and not in the cgminer command. #4. depending on whether or not you're using the gaming version, your optimal -gpuengine is either 947, 1000, or 1007. These settings kept the temperature manageable in a cool room. Be advised, these cards run VERY HOT with peak settings. So if you were to define everything after your pool settings, it would look like this: -lookup-gap 2 --auto-fan --gpu-engine 1000 --gpu-memclock 1250 -w 256 -v 1 -I 20 -g 1 --thread-concurrency 32765 --temp-target 80 --gpu-powertune 20 Again, if you leave powertune out of the commandline, push it up to 50 with MSI Afterburner. I used a few different thread-concurrency settngs, and some were great but would give 1 or 2 hw errors every 24 hours Title: Re: MSI R9 290 Post by: Starscream on May 16, 2014, 05:57:03 PM 1. Your answers are wrong.
2. You necro'd a half a year old thread, congrats. Title: Re: MSI R9 290 Post by: ivanko16003 on July 25, 2018, 02:09:39 PM hello!
how are you? |