|
Title: 2 PSU Miner Setup Post by: PondSea on February 03, 2014, 03:26:40 AM Hi Guys,
Do you have a guide that you can point me 2? I will be setting up a 6 card Rig but i dont know how to connect up the second PSU to the 3 cards. I currently will have the following: PSU 1 : Mobo/HD/3 GPUs + Risers PSU 2 : 3 GPUs (i dont know if i connect the risers to the 1st or second GPU) Any help would be appreciated. Title: Re: 2 PSU Miner Setup Post by: Prelude on February 03, 2014, 03:34:51 AM Connect the green wires and any 2 black wires from the 24 pin ATX connectors together. Risers to first PSU. Figure 35w per riser.
Title: Re: 2 PSU Miner Setup Post by: PondSea on February 03, 2014, 03:39:30 AM Connect the green wires and any 2 black wires from the 24 pin ATX connectors together. Risers to first PSU. Figure 35w per riser. That is to trick the PSU thinking it is connected to a MB right? Like http://www.overclock.net/t/14455/multiple-power-supply-guide Title: Re: 2 PSU Miner Setup Post by: Prelude on February 03, 2014, 03:56:47 AM Basically that will allow the 2nd PSU to receive the on and off signal that the motherboard sends when the power button is pressed.
|