|
Title: Windows 10 lag (b250 mining expert 9 rx580) Post by: Waamoom on July 01, 2018, 05:17:11 PM Greeting everybody
I am having problems with my rig I7 7700k 9 rx580 B250 mining expert 4 ram 4 1000w power supplies -- When I plug multiple gpus windows 10 lag and become slow when I try with only one it works fine I installed latest drivers and switched from graphics to compute didn't fix it Anyone help ? Title: Re: Windows 10 lag (b250 mining expert 9 rx580) Post by: Mamasita22 on July 01, 2018, 06:13:03 PM Some visual lags is normal because mining uses 100% of primary gpu. Try increase pagefile. Do you use any pci-e extension boards?
Title: Re: Windows 10 lag (b250 mining expert 9 rx580) Post by: Waamoom on July 01, 2018, 06:51:51 PM I am not minimg yet from that lag .
Title: Re: Windows 10 lag (b250 mining expert 9 rx580) Post by: edwardceng on July 02, 2018, 05:42:36 AM if that before/after updated Window?
typically, a problem occurs after the update, try going back to the old version before it is updated. have you tried to another PSUs? It can be possible either of the two damaged PSUs such as cables or etc. Title: Re: Windows 10 lag (b250 mining expert 9 rx580) Post by: metr20 on July 02, 2018, 06:24:20 AM https://2bitcoins.ru/wp-content/uploads/2018/03/3257_4705401.jpg
manufacturer's recommendations for connecting cards some users write that under Windows there are problems in working with a large number of cards (I do not think that this is true). perhaps you have not configured the BIOS of the motherboard, or the BIOS of the old version read this topic - https://bitcointalk.org/index.php?topic=2110421.0 (https://bitcointalk.org/index.php?topic=2110421.0) Title: Re: Windows 10 lag (b250 mining expert 9 rx580) Post by: darkneorus on July 03, 2018, 01:17:15 AM I've posted a solution in a similar thread, hope that helps
set your primary GPU to CPU Graphics, disable iGPU Multi-Monitor in UEFI and connect a display to MB's HDMI connector. your rig freezes because Windows tries to use one of your AMD GPUs for multi-monitor output, if you disable that option in UEFI all the lags will be gone. Title: Re: Windows 10 lag (b250 mining expert 9 rx580) Post by: metr20 on July 03, 2018, 05:56:24 AM https://2bitcoins.ru/wp-content/uploads/2018/03/3257_4705401.jpg To support more than 8 cards for mining, you need to instal AMD Radeon Softwar Crimson ReLive Edition 17.10.2 driver[/u] Title: Re: Windows 10 lag (b250 mining expert 9 rx580) Post by: Bigdrago on August 13, 2018, 08:19:50 AM I've posted a solution in a similar thread, hope that helps set your primary GPU to CPU Graphics, disable iGPU Multi-Monitor in UEFI and connect a display to MB's HDMI connector. your rig freezes because Windows tries to use one of your AMD GPUs for multi-monitor output, if you disable that option in UEFI all the lags will be gone. Win 1803 is causing this? Title: Re: Windows 10 lag (b250 mining expert 9 rx580) Post by: Metroid on August 13, 2018, 11:29:01 AM Win 1803 is causing this? win 1803 broke headless rdp and vnc support, if you want them you need an hdmi dummy or a real monitor for that matter for now. Title: Re: Windows 10 lag (b250 mining expert 9 rx580) Post by: swogerino on August 13, 2018, 11:32:42 AM I had a real world case scenario with this motherboard. This motherboard was starting to behave exactly like yours when we plugged in more than 9 cards, up to 9 it was working well. We had only G4560 as a processor and not an i7.
We had a total of 11 cards , Rx 580 Sapphire nitro plus 8 Gb, and I remember that I changed to a specific driver, namely 17.11.1 from AMD , switched everything to Compute and finally the board was running with 11 cards mining flawlessly. You should probably give it a try to this specific driver. By the way , the board is still mining with this driver since about 6 months ago. Title: Re: Windows 10 lag (b250 mining expert 9 rx580) Post by: Privatoria on August 16, 2018, 08:43:35 PM Greeting everybody You need to install the latest drivers, increase the swap file to 40-50 GB, reduce memory overclocking and increase the voltage on the graphics card core if it is less than 850 mV.I am having problems with my rig I7 7700k 9 rx580 B250 mining expert 4 ram 4 1000w power supplies -- When I plug multiple gpus windows 10 lag and become slow when I try with only one it works fine I installed latest drivers and switched from graphics to compute didn't fix it Anyone help ? Title: Re: Windows 10 lag (b250 mining expert 9 rx580) Post by: Metroid on August 16, 2018, 11:21:07 PM I had a real world case scenario with this motherboard. This motherboard was starting to behave exactly like yours when we plugged in more than 9 cards, up to 9 it was working well. We had only G4560 as a processor and not an i7. We had a total of 11 cards , Rx 580 Sapphire nitro plus 8 Gb, and I remember that I changed to a specific driver, namely 17.11.1 from AMD , switched everything to Compute and finally the board was running with 11 cards mining flawlessly. You should probably give it a try to this specific driver. By the way , the board is still mining with this driver since about 6 months ago. i would remove that i7 7700 if you are mining ethash coins, it makes no sense using it. I set up a mining rig with 13 cards with this motherboard last December for a friend with a celeron g3900 and mining eth full load uses only 7% of the cpu, there has never been any lag at all, well thanks for the ssd as virtual memory hehe Title: Re: Windows 10 lag (b250 mining expert 9 rx580) Post by: whitesites on August 16, 2018, 11:33:00 PM Thats usually from a bad card in your rig.
That happend to me. Turns out one bad card was hanging the system. Once I removed that card from the Rig everything started moving fast again. Title: Re: Windows 10 lag (b250 mining expert 9 rx580) Post by: socks435 on August 17, 2018, 12:01:03 AM Have you tried to add 3 molex in your board because I think this is the reason why your miner hangs when you run all 9 cards.
try to put the 3 molex and change your page files to 64gb it should be work right now after you do this if not try to use the blockchain driver. |
