Title: Small Farm - Big Problems / lost chips (000) in a S9/T9+
Post by: Proclamer on July 02, 2018, 04:43:17 PM
Small Farm - Big Problems / lost chips (000) in a S9/T9+ Hello people; this week we did major maintenance on the small farm. We turned off all the equipment and cleaned the air conditioners (after three months of work without maintenance, the air conditioners were very dirty). We proceeded to do the monthly cleaning of each of the miners. of maintenance left 3 of the 4 affected miners. when we turned them on we found the following faults: antminer S9: 13.5 TH description: Hardware Version 16.8.1.3 Kernel Version Linux 3.14.0-xilinx-ge8a2f71-dirty #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017 File System Version Fri Nov 17 17:37:49 CST 2017 Logic Version S9_V2.54 BMminer Version 2.0.0
https://ibb.co/jtFfXJ chain number 8 does not recognize all the chips, the board has 63 but that card only 29. Why is this happening? We have tested with other power supply, we have done soft reset and hard reset, we have loaded the factory values. We have reviewed the wiring to the machine. and the machine remains the same. This is XILINX board. Totalram: 507527168 Detect 512MB control board of XILINX DETECT HW version=0008c510 miner ID : 8058ad0c68808814 Miner Type = S9 AsicType = 1387 real AsicNum = 63 use critical mode to search freq... get PLUG ON=0x000000e0 Find hashboard on Chain[5] Find hashboard on Chain[6] Find hashboard on Chain[7] set_reset_allhashboard = 0x0000ffff Check chain[5] PIC fw version=0x03 Check chain[6] PIC fw version=0x03 Check chain[7] PIC fw version=0x03 chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] has freq in PIC, will disable freq setting. chain[5] has freq in PIC and will jump over... Chain[5] has core num in PIC Chain[5] ASIC[43] has core num=1 Chain[5] ASIC[46] has core num=15 Chain[5] ASIC[49] has core num=4 Chain[5] ASIC[56] has core num=3 Check chain[5] PIC fw version=0x03 chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] has freq in PIC, will disable freq setting. chain[6] has freq in PIC and will jump over... Chain[6] has core num in PIC Chain[6] ASIC[42] has core num=1 Chain[6] ASIC[43] has core num=2 Chain[6] ASIC[51] has core num=1 Check chain[6] PIC fw version=0x03 chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] has freq in PIC, will disable freq setting. chain[7] has freq in PIC and will jump over... Chain[7] has core num in PIC Chain[7] ASIC[9] has core num=15 Chain[7] ASIC[17] has core num=15 Chain[7] ASIC[60] has core num=1 Chain[7] ASIC[62] has core num=1 Check chain[7] PIC fw version=0x03 get PIC voltage=91 on chain[5], value=890 get PIC voltage=91 on chain[6], value=890 get PIC voltage=91 on chain[7], value=890 set_reset_allhashboard = 0x00000000 chain[5] temp offset record: 62,-2,0,0,0,0,33,0 chain[5] temp chip I2C addr=0x98 chain[6] temp offset record: 62,-2,0,0,0,0,33,0 chain[6] temp chip I2C addr=0x98 chain[7] temp offset record: 62,-5,0,0,0,0,33,0 chain[7] temp chip I2C addr=0x98 set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x00000000 CRC error counter=0 set command mode to VIL
--- check asic number After Get ASIC NUM CRC error counter=0 set_baud=0 The min freq=700 set real timeout 52, need sleep=379392 After TEST CRC error counter=0 set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x00000000 search freq for 1 times, completed chain = 3, total chain num = 3 set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x00000000 restart Miner chance num=2 waiting for receive_func to exit! waiting for pic heart to exit! bmminer not found= 1378 root 0:00 grep bmminer
bmminer not found, restart bmminer ... bmminer not found= 1620 root 0:00 grep bmminer
bmminer not found, restart bmminer ... This is user mode for mining Detect 512MB control board of XILINX Miner Type = S9 Miner compile time: Fri Nov 17 17:37:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x00000000 set_reset_allhashboard = 0x0000ffff miner ID : 8058ad0c68808814 set_reset_allhashboard = 0x0000ffff Checking fans!get fan[2] speed=4440 get fan[2] speed=4440 get fan[2] speed=4440 get fan[2] speed=4440 get fan[2] speed=4440 get fan[2] speed=4440 get fan[5] speed=6120 get fan[2] speed=4440 get fan[5] speed=6120 get fan[2] speed=4440 get fan[5] speed=6120 chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] Detect: use voltage limit rules on single board! Detect: S9_63 use voltage level=1 : 1 Chain[J6] has backup chain_voltage=890 Check chain[5] PIC fw version=0x03 chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] Detect: use voltage limit rules on single board! Detect: S9_63 use voltage level=1 : 1 Chain[J7] has backup chain_voltage=890 Check chain[6] PIC fw version=0x03 chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] Detect: use voltage limit rules on single board! Detect: S9_63 use voltage level=1 : 1 Chain[J8] has backup chain_voltage=890 Check chain[7] PIC fw version=0x03 Chain[J6] orignal chain_voltage_pic=91 value=890 Chain[J7] orignal chain_voltage_pic=91 value=890 Chain[J8] orignal chain_voltage_pic=91 value=890 set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x00000000 Chain[J6] has 63 asic Chain[J7] has 63 asic Chain[J8] has 29 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 29 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 29 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 29 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 29 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 29 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 29 asic Chain[J6] has core num in PIC Chain[J6] ASIC[43] has core num=1 Chain[J6] ASIC[46] has core num=15 Chain[J6] ASIC[49] has core num=4 Chain[J6] ASIC[56] has core num=3 Chain[J7] has core num in PIC Chain[J7] ASIC[42] has core num=1 Chain[J7] ASIC[43] has core num=2 Chain[J7] ASIC[51] has core num=1 Chain[J8] has core num in PIC Chain[J8] ASIC[9] has core num=15 Chain[J8] ASIC[17] has core num=15 Chain[J8] ASIC[60] has core num=1 Chain[J8] ASIC[62] has core num=1 miner total rate=13587GH/s fixed rate=13500GH/s read PIC voltage=940 on chain[5] Chain:5 chipnum=63 Chain[J6] voltage added=0.0V Chain:5 temp offset=-2 Chain:5 base freq=643 Asic[ 0]:643 Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 Asic[ 8]:643 Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 Asic[16]:643 Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 Asic[24]:643 Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643 Asic[32]:643 Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643 Asic[40]:643 Asic[41]:643 Asic[42]:643 Asic[43]:643 Asic[44]:643 Asic[45]:643 Asic[46]:643 Asic[47]:643 Asic[48]:643 Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 Asic[56]:643 Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643 Chain:5 max freq=643 Chain:5 min freq=643
read PIC voltage=940 on chain[6] Chain:6 chipnum=63 Chain[J7] voltage added=0.0V Chain:6 temp offset=-2 Chain:6 base freq=631 Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631 Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631 Chain:6 max freq=631 Chain:6 min freq=631
read PIC voltage=940 on chain[7] Chain:7 chipnum=29 Chain[J8] voltage added=0.0V Chain:7 temp offset=-5 Chain:7 base freq=650 Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Chain:7 max freq=650 Chain:7 min freq=650
Miner fix freq ... read PIC voltage=940 on chain[5] Chain:5 chipnum=63 Chain[J6] voltage added=0.0V Chain:5 temp offset=-2 Chain:5 base freq=643 Asic[ 0]:643 Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 Asic[ 8]:643 Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 Asic[16]:643 Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 Asic[24]:643 Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643 Asic[32]:643 Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643 Asic[40]:643 Asic[41]:643 Asic[42]:643 Asic[43]:643 Asic[44]:643 Asic[45]:643 Detect a bad chip=46 on chain[5], fixed to 400M Asic[46]:643 Asic[47]:643 Asic[48]:643 Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 Asic[56]:643 Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643 Chain:5 max freq=643 Chain:5 min freq=643
read PIC voltage=940 on chain[6] Chain:6 chipnum=63 Chain[J7] voltage added=0.0V Chain:6 temp offset=-2 Chain:6 base freq=631 Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631 Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631 Chain:6 max freq=631 Chain:6 min freq=631
read PIC voltage=940 on chain[7] Chain:7 chipnum=29 Chain[J8] voltage added=0.0V Chain:7 temp offset=-5 Chain:7 base freq=650 Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650 Detect a bad chip=9 on chain[7], fixed to 400M Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650 Detect a bad chip=17 on chain[7], fixed to 400M Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Chain:7 max freq=650 Chain:7 min freq=650
max freq = 650 set baud=1 Chain[J6] PIC temp offset=62,-2,0,0,0,0,33,0 chain[5] temp chip I2C addr=0x98 Chain[J6] chip[244] use PIC middle temp offset=-2 typeID=55 New offset Chain[5] chip[244] local:34 remote:35 offset:30 Chain[J6] chip[244] get middle temp offset=30 typeID=55 Chain[J7] PIC temp offset=62,-2,0,0,0,0,33,0 chain[6] temp chip I2C addr=0x98 Chain[J7] chip[244] use PIC middle temp offset=-2 typeID=55 New offset Chain[6] chip[244] local:32 remote:34 offset:28 Chain[J7] chip[244] get middle temp offset=28 typeID=55 single board rate=4539 voltage limit=890 on chain[5] last_testpatten_highest_pcb_temp=59 too low, fix voltage=900 on chain[5] get PIC voltage=890 on chain[5], check: must be < 900 retryFlag=1 will set the voltage limited on chain[5], change voltage=900 now set pic voltage=74 on chain[5] single board rate=4529 voltage limit=890 on chain[6] last_testpatten_highest_pcb_temp=59 too low, fix voltage=900 on chain[6] get PIC voltage=890 on chain[6], check: must be < 900 retryFlag=1 will set the voltage limited on chain[6], change voltage=900 now set pic voltage=74 on chain[6] single board rate=4518 voltage limit=890 on chain[7] last_testpatten_highest_pcb_temp=59 too low, fix voltage=900 on chain[7] get PIC voltage=890 on chain[7], check: must be < 900 retryFlag=1 will set the voltage limited on chain[7], change voltage=900 now set pic voltage=74 on chain[7] Chain[J6] set working voltage=900 [74] Chain[J7] set working voltage=900 [74] Chain[J8] set working voltage=900 [74] do heat board 8xPatten for 1 times start send works on chain[5] start send works on chain[6] start send works on chain[7] get send work num :57456 on Chain[5] get send work num :57456 on Chain[6] get send work num :57456 on Chain[7] wait recv nonce on chain[5] wait recv nonce on chain[6] wait recv nonce on chain[7] get nonces on chain[5] require nonce number:912 require validnonce number:57456 asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912 asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912 asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912 asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912 asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912 asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912 asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912 asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=643 freq[01]=643 freq[02]=643 freq[03]=643 freq[04]=643 freq[05]=643 freq[06]=643 freq[07]=643 freq[08]=643 freq[09]=643 freq[10]=643 freq[11]=643 freq[12]=643 freq[13]=643 freq[14]=643 freq[15]=643 freq[16]=643 freq[17]=643 freq[18]=643 freq[19]=643 freq[20]=643 freq[21]=643 freq[22]=643 freq[23]=643 freq[24]=643 freq[25]=643 freq[26]=643 freq[27]=643 freq[28]=643 freq[29]=643 freq[30]=643 freq[31]=643 freq[32]=643 freq[33]=643 freq[34]=643 freq[35]=643 freq[36]=643 freq[37]=643 freq[38]=643 freq[39]=643 freq[40]=643 freq[41]=643 freq[42]=643 freq[43]=643 freq[44]=643 freq[45]=643 freq[46]=643 freq[47]=643 freq[48]=643 freq[49]=643 freq[50]=643 freq[51]=643 freq[52]=643 freq[53]=643 freq[54]=643 freq[55]=643 freq[56]=643 freq[57]=643 freq[58]=643 freq[59]=643 freq[60]=643 freq[61]=643 freq[62]=643
total valid nonce number:57456 total send work number:57456 require valid nonce number:57456 repeated_nonce_num:0 err_nonce_num:26204 last_nonce_num:29053 get nonces on chain[6] require nonce number:912 require validnonce number:57456 asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912 asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912 asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912 asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912 asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912 asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912 asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912 asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631 freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631 freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631 freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631 freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631 freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631 freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631 freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57456 total send work number:57456 require valid nonce number:57456 repeated_nonce_num:0 err_nonce_num:25855 last_nonce_num:24233 get nonces on chain[7] require nonce number:912 require validnonce number:57456 asic[00]=01 asic[01]=00 asic[02]=00 asic[03]=00 asic[04]=00 asic[05]=00 asic[06]=04 asic[07]=00 asic[08]=00 asic[09]=52 asic[10]=13 asic[11]=00 asic[12]=00 asic[13]=04 asic[14]=00 asic[15]=00 asic[16]=00 asic[17]=08 asic[18]=00 asic[19]=00 asic[20]=00 asic[21]=00 asic[22]=00 asic[23]=00 asic[24]=00 asic[25]=00 asic[26]=00 asic[27]=00 asic[28]=00 asic[29]=00 asic[30]=00 asic[31]=00 asic[32]=00 asic[33]=00 asic[34]=00 asic[35]=00 asic[36]=00 asic[37]=00 asic[38]=00 asic[39]=00 asic[40]=00 asic[41]=00 asic[42]=00 asic[43]=00 asic[44]=00 asic[45]=00 asic[46]=00 asic[47]=00 asic[48]=00 asic[49]=00 asic[50]=00 asic[51]=00 asic[52]=00 asic[53]=00 asic[54]=00 asic[55]=00 asic[56]=00 asic[57]=00 asic[58]=00 asic[59]=00 asic[60]=00 asic[61]=00 asic[62]=00
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=650 freq[01]=650 freq[02]=650 freq[03]=650 freq[04]=650 freq[05]=650 freq[06]=650 freq[07]=650 freq[08]=650 freq[09]=650 freq[10]=650 freq[11]=650 freq[12]=650 freq[13]=650 freq[14]=650 freq[15]=650 freq[16]=650 freq[17]=650 freq[18]=650 freq[19]=650 freq[20]=650 freq[21]=650 freq[22]=650 freq[23]=650 freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650 freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650 freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650 freq[48]=650 freq[49]=650 freq[50]=650 freq[51]=650 freq[52]=650 freq[53]=650 freq[54]=650 freq[55]=650 freq[56]=650 freq[57]=650 freq[58]=650 freq[59]=650 freq[60]=650 freq[61]=650 freq[62]=650
total valid nonce number:82 total send work number:57456 require valid nonce number:57456 repeated_nonce_num:0 err_nonce_num:33 last_nonce_num:162 chain[5]: All chip cores are opened OK! Test Patten on chain[5]: OK! chain[6]: All chip cores are opened OK! Test Patten on chain[6]: OK! chain[7]: some chip cores are not opened FAILED! Test Patten on chain[7]: FAILED! do heat board 8xPatten for 2 times do open core on Chain[7]... Done open core on Chain[7]! start send works on chain[5] start send works on chain[6] start send works on chain[7] get send work num :57456 on Chain[5] get send work num :57456 on Chain[6] get send work num :57456 on Chain[7] wait recv nonce on chain[5] wait recv nonce on chain[6] wait recv nonce on chain[7] get nonces on chain[5] require nonce number:912 require validnonce number:57456 asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912 asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912 asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912 asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912 asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912 asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912 asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912 asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=643 freq[01]=643 freq[02]=643 freq[03]=643 freq[04]=643 freq[05]=643 freq[06]=643 freq[07]=643 freq[08]=643 freq[09]=643 freq[10]=643 freq[11]=643 freq[12]=643 freq[13]=643 freq[14]=643 freq[15]=643 freq[16]=643 freq[17]=643 freq[18]=643 freq[19]=643 freq[20]=643 freq[21]=643 freq[22]=643 freq[23]=643 freq[24]=643 freq[25]=643 freq[26]=643 freq[27]=643 freq[28]=643 freq[29]=643 freq[30]=643 freq[31]=643 freq[32]=643 freq[33]=643 freq[34]=643 freq[35]=643 freq[36]=643 freq[37]=643 freq[38]=643 freq[39]=643 freq[40]=643 freq[41]=643 freq[42]=643 freq[43]=643 freq[44]=643 freq[45]=643 freq[46]=643 freq[47]=643 freq[48]=643 freq[49]=643 freq[50]=643 freq[51]=643 freq[52]=643 freq[53]=643 freq[54]=643 freq[55]=643 freq[56]=643 freq[57]=643 freq[58]=643 freq[59]=643 freq[60]=643 freq[61]=643 freq[62]=643
total valid nonce number:57456 total send work number:57456 require valid nonce number:57456 repeated_nonce_num:0 err_nonce_num:26214 last_nonce_num:29260 get nonces on chain[6] require nonce number:912 require validnonce number:57456 asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912 asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912 asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912 asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912 asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912 asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912 asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912 asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631 freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631 freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631 freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631 freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631 freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631 freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631 freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57456 total send work number:57456 require valid nonce number:57456 repeated_nonce_num:0 err_nonce_num:25863 last_nonce_num:34081 get nonces on chain[7] require nonce number:912 require validnonce number:57456 asic[00]=00 asic[01]=00 asic[02]=00 asic[03]=00 asic[04]=00 asic[05]=00 asic[06]=05 asic[07]=00 asic[08]=00 asic[09]=31 asic[10]=07 asic[11]=00 asic[12]=00 asic[13]=04 asic[14]=00 asic[15]=00 asic[16]=01 asic[17]=08 asic[18]=00 asic[19]=00 asic[20]=00 asic[21]=00 asic[22]=00 asic[23]=00 asic[24]=00 asic[25]=00 asic[26]=00 asic[27]=00 asic[28]=00 asic[29]=00 asic[30]=00 asic[31]=00 asic[32]=00 asic[33]=00 asic[34]=00 asic[35]=00 asic[36]=00 asic[37]=00 asic[38]=00 asic[39]=00 asic[40]=00 asic[41]=00 asic[42]=00 asic[43]=00 asic[44]=00 asic[45]=00 asic[46]=00 asic[47]=00 asic[48]=00 asic[49]=00 asic[50]=00 asic[51]=00 asic[52]=00 asic[53]=00 asic[54]=00 asic[55]=00 asic[56]=00 asic[57]=00 asic[58]=00 asic[59]=00 asic[60]=00 asic[61]=00 asic[62]=00
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=650 freq[01]=650 freq[02]=650 freq[03]=650 freq[04]=650 freq[05]=650 freq[06]=650 freq[07]=650 freq[08]=650 freq[09]=650 freq[10]=650 freq[11]=650 freq[12]=650 freq[13]=650 freq[14]=650 freq[15]=650 freq[16]=650 freq[17]=650 freq[18]=650 freq[19]=650 freq[20]=650 freq[21]=650 freq[22]=650 freq[23]=650 freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650 freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650 freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650 freq[48]=650 freq[49]=650 freq[50]=650 freq[51]=650 freq[52]=650 freq[53]=650 freq[54]=650 freq[55]=650 freq[56]=650 freq[57]=650 freq[58]=650 freq[59]=650 freq[60]=650 freq[61]=650 freq[62]=650
total valid nonce number:56 total send work number:57456 require valid nonce number:57456 repeated_nonce_num:0 err_nonce_num:20 last_nonce_num:0 chain[5]: All chip cores are opened OK! Test Patten on chain[5]: OK! chain[6]: All chip cores are opened OK! Test Patten on chain[6]: OK! chain[7]: some chip cores are not opened FAILED! Test Patten on chain[7]: FAILED! setStartTimePoint total_tv_start_sys=410 total_tv_end_sys=411 restartNum = 2 , auto-reinit enabled... PCB temp>60 will set the voltage limited on chain[5], change voltage=890 PCB temp>60 now set pic voltage=91 on chain[5] PCB temp>60 will set the voltage limited on chain[6], change voltage=890 PCB temp>60 now set pic voltage=91 on chain[6] PCB temp>60 will set the voltage limited on chain[7], change voltage=890 PCB temp>60 now set pic voltage=91 on chain[7] do read_temp_func once... do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63) Asic[01]=76.9730 Asic[02]=74.2890 Asic[03]=74.0040 Asic[04]=74.7420 Asic[05]=70.4810 Asic[06]=71.0010 Asic[07]=75.1950 Asic[08]=72.7460 Asic[09]=68.8700 Asic[10]=74.6920 Asic[11]=74.0540 Asic[12]=72.0740 Asic[13]=75.9330 Asic[14]=67.2090 Asic[15]=70.5810 Asic[16]=77.7120 Asic[17]=69.1380 Asic[18]=72.0410 Asic[19]=68.0650 Asic[20]=72.4770 Asic[21]=71.6890 Asic[22]=67.6120 Asic[23]=77.7120 Asic[24]=70.5640 Asic[25]=76.9900 Asic[26]=72.3260 Asic[27]=71.0010 Asic[28]=75.3120 Asic[29]=73.0310 Asic[30]=71.7720 Asic[31]=79.8760 Asic[32]=73.9700 Asic[33]=74.4400 Asic[34]=73.9700 Asic[35]=71.6720 Asic[36]=76.2690 Asic[37]=71.9570 Asic[38]=76.3190 Asic[39]=75.0270 Asic[40]=68.6350 Asic[41]=79.1710 Asic[42]=71.7720 Asic[43]=72.9800 Asic[44]=76.0000 Asic[45]=73.0140 Asic[46]=75.4630 Asic[47]=40.1980 Asic[48]=75.6980 Asic[49]=71.2190 Asic[50]=71.9910 Asic[51]=75.2620 Asic[52]=74.8430 Asic[53]=71.2020 Asic[54]=71.8400 Asic[55]=72.3930 Asic[56]=70.8330 Asic[57]=76.2180 Asic[58]=79.6910 Asic[59]=73.2150 Asic[60]=73.7190 Asic[61]=75.3120 Asic[62]=69.0880 Asic[63]=70.9840
get RT hashrate from Chain[6]: (asic index start from 1-63) Asic[01]=66.7730 Asic[02]=67.5280 Asic[03]=71.2690 Asic[04]=68.9710 Asic[05]=72.9640 Asic[06]=77.8790 Asic[07]=71.0170 Asic[08]=75.2620 Asic[09]=71.0850 Asic[10]=71.0170 Asic[11]=73.6010 Asic[12]=60.8840 Asic[13]=74.0710 Asic[14]=70.0110 Asic[15]=73.1480 Asic[16]=71.0510 Asic[17]=75.8490 Asic[18]=69.4070 Asic[19]=73.6680 Asic[20]=77.8460 Asic[21]=72.1250 Asic[22]=70.9000 Asic[23]=69.7930 Asic[24]=78.2650 Asic[25]=69.2560 Asic[26]=69.7090 Asic[27]=72.5610 Asic[28]=70.0280 Asic[29]=74.5240 Asic[30]=69.8090 Asic[31]=72.2090 Asic[32]=74.7760 Asic[33]=73.3330 Asic[34]=67.2090 Asic[35]=69.5240 Asic[36]=72.5110 Asic[37]=74.1720 Asic[38]=73.6350 Asic[39]=71.4540 Asic[40]=74.7590 Asic[41]=67.3100 Asic[42]=68.5340 Asic[43]=76.0510 Asic[44]=73.1650 Asic[45]=73.0140 Asic[46]=69.9940 Asic[47]=72.7790 Asic[48]=72.6450 Asic[49]=69.1050 Asic[50]=67.4270 Asic[51]=70.3300 Asic[52]=67.4100 Asic[53]=68.9040 Asic[54]=70.5310 Asic[55]=76.1680 Asic[56]=78.9360 Asic[57]=72.9640 Asic[58]=74.7920 Asic[59]=71.3870 Asic[60]=66.5710 Asic[61]=69.4070 Asic[62]=70.6990 Asic[63]=73.9700
get RT hashrate from Chain[7]: (asic index start from 1-63) Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000 Asic[09]=0.00000 Asic[10]=1.82800 Asic[11]=301.989 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=2.34800 Asic[15]=0.00000 Asic[16]=0.00000 Asic[17]=3.28800 Asic[18]=1.29100 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000 Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Check Chain[J6] ASIC RT error: (asic index start from 1-63) Check Chain[J7] ASIC RT error: (asic index start from 1-63) Check Chain[J8] ASIC RT error: (asic index start from 1-63) Asic[11]=301.989000 Done check_asic_reg do read temp on Chain[5] Chain[5] Chip[62] TempTypeID=55 middle offset=30 Chain[5] Chip[62] local Temp=62 Chain[5] Chip[62] middle Temp=76 Done read temp on Chain[5] do read temp on Chain[6] Chain[6] Chip[62] TempTypeID=55 middle offset=28 Chain[6] Chip[62] local Temp=59 Chain[6] Chip[62] middle Temp=72 Done read temp on Chain[6] do read temp on Chain[7] Done read temp on Chain[7] Set fixed fan speed=100 FAN PWM: 100 read_temp_func Done! CRC error counter=37833
Title: Re: Small Farm - Big Problems / lost chips (000) in a S9/T9+
Post by: ccgllc on July 02, 2018, 06:53:14 PM
The hardest thing for any electrical gear to deal with, other than heat, is power cycleing. When you power down, the fans stop running, and heat builds up briefly until natural convection eliminates it.
The net result is that you should expect most problems to show up after a power cycling event. In this case, it appears you have a hash card failing. You can try rebooting or power cycling it again and cross your fingers, but if it is persistant, the card needs to be repaired or replaced.
Title: Re: Small Farm - Big Problems / lost chips (000) in a S9/T9+
Post by: dutchlincoln on July 11, 2018, 09:15:24 PM
better said: forced air intake in your farm rules...
Next time better disconnect network first, and power down after 10 minutes...
Title: Re: Small Farm - Big Problems / lost chips (000) in a S9/T9+
Post by: dutchlincoln on September 16, 2018, 04:29:20 PM
i always reboot first when intended to power down. Fans go running 100% and hashing stips, giving a forced cool-down. Then, after 30 sec to a minute, i cut power.
|