|
Title: Help needed with Above 4G decoding and SMOS Post by: valjean on July 13, 2018, 11:26:26 AM Hello Guys,
I have built 2 RIGS with 4 RX 570 each and I am quite happy about them. I tried to run them using Windows 7 64 bit edition but I was having poor hashrate so I switch to SMOS and I love the way it work !!! My only issue so far is that I can't make them work with more than 4 GPUS (both motherboards have a "mining option in the bios and are supposed to work with up to 6 cards ) First RIG use an MSI 270-A PRO motherboard (I read that many people were having trouble so I bought another motherboard with another chipset to set my second RIG) Second RIG use a Gigabyte H110-D3A Both Rigs have Celerons, 4 Go Crucial Balistix Memory and a 16 Go USB Stick to run SMOS. My problem is as follow : When I enable 4 G decoding, then my USB stick doesn't show as a booting device, so I can't boot SMOS, the MSI show me a black screen, the Gigabyte open directly the Bios in the booting section and show no device to boot. I have read that it has to do with SMOS not being a UEFI disk but...there seems to be no way to make SMOS a UEFI drive Does someone had a similar issue with it ? I have already tried several things 1) Using Integrated graphics 2) Change the Gen to Gen 2 3) Enable Legacy boot 4) Update BIOS 5) Switch risers and video cards 6) I have read quite a lot using différents forums but no answer has helped me fixe this problem I would be very gratefull if someone could find a minute to answer and possibly find a solution to my problem Regards Jean Title: Re: Help needed with Above 4G decoding and SMOS Post by: valjean on July 13, 2018, 05:09:30 PM So Many answers already !!!😁 One of my Idea was to try using à harddrive formatted in uefi ans set smos on it.
Title: Re: Help needed with Above 4G decoding and SMOS Post by: zbucks_project on July 13, 2018, 07:00:47 PM Hello Guys, I have built 2 RIGS with 4 RX 570 each and I am quite happy about them. I tried to run them using Windows 7 64 bit edition but I was having poor hashrate so I switch to SMOS and I love the way it work !!! My only issue so far is that I can't make them work with more than 4 GPUS (both motherboards have a "mining option in the bios and are supposed to work with up to 6 cards ) First RIG use an MSI 270-A PRO motherboard (I read that many people were having trouble so I bought another motherboard with another chipset to set my second RIG) Second RIG use a Gigabyte H110-D3A Both Rigs have Celerons, 4 Go Crucial Balistix Memory and a 16 Go USB Stick to run SMOS. My problem is as follow : When I enable 4 G decoding, then my USB stick doesn't show as a booting device, so I can't boot SMOS, the MSI show me a black screen, the Gigabyte open directly the Bios in the booting section and show no device to boot. I have read that it has to do with SMOS not being a UEFI disk but...there seems to be no way to make SMOS a UEFI drive Does someone had a similar issue with it ? I have already tried several things 1) Using Integrated graphics 2) Change the Gen to Gen 2 3) Enable Legacy boot 4) Update BIOS 5) Switch risers and video cards 6) I have read quite a lot using différents forums but no answer has helped me fixe this problem I would be very gratefull if someone could find a minute to answer and possibly find a solution to my problem Regards Jean I remember seeing this, change your boot to Legacy and not UEFI. |