Title: Not picking up monitor with no graphics cards? Post by: Monetizer on February 15, 2014, 08:46:29 AM Ok, so recently I had to send of my 7950 to get fixed under warranty so ever since I have been using teamviewer. Now the problem is when I try to connect a real monitor to it through the onboard hdmi slot it won't display anything. Does anyone have any ideas on how to get it to display.
Title: Re: Not picking up monitor with no graphics cards? Post by: hi_i_am_a_nerd on February 16, 2014, 03:25:11 AM Ok, so recently I had to send of my 7950 to get fixed under warranty so ever since I have been using teamviewer. Now the problem is when I try to connect a real monitor to it through the onboard hdmi slot it won't display anything. Does anyone have any ideas on how to get it to display. hi, i would suggest using the onboard VGA, or DVI instead of HDMI and see if that works Title: Re: Not picking up monitor with no graphics cards? Post by: MaTToS88 on February 16, 2014, 02:24:41 PM I experienced same problems with using a teamviewer and then connecting real monitor to PC .
Just let the HDMI cable connected and perform reboot, you should see your BIOS posting and than OS boot . Or you have to choose right output in BIOS so perform cmos reset too and output should be set by default to auto/both available outputs. |