Title: BOUGHT A RIG NOT WORKING AT ALL PLEASE HELP Post by: m4ttyd on February 17, 2014, 01:22:01 PM bought a £3000 rig
5 x sapphire r9290x Gigabyte x79 up4 MB and all parts to suit 8GB ram 64 SSD 2 x 1000w Corsair PSU Running windows 8.1pro It wont recognise the 5th card for a start (tried entering BIOS and disabling audio but no luck, not sure if I did it right) Secondly, tried to run 4 cards on cg miner with this config below, all I get is "stratum from pool 0 detected new block", my hash rate is on MH not KH and I while its mining its not mining, if you know what I mean. I really need someone to team viewer my settings and help me out and im wiling to compensate Best Matt { "pools" : [ { "url" : "stratum+tcp://us.clevermining.com:3333 -u", "user" : "133wWUryHUizKnCtRvnqPUbz1TfLBcVebb", "pass" : "anything" } ], "intensity" : "20", "worksize" : "256", "lookup-gap" : "2", "thread-concurrency" : "33810", "gpu-engine" : "896", "gpu-fan" : "40-100", "gpu-memclock" : "1450", "gpu-memdiff" : "0", "gpu-powertune" : "50", "gpu-dyninternal" : "7", "gpu-threads" : "1", "temp-cutoff" : "99", "temp-overheat" : "95", "temp-target" : "90", "api-mcast-port" : "4028", "api-port" : "4028", "api-listen" : true, "api-allow" : "W:10.197.0.0/24", "auto-fan" : true, "expiry" : "120", "failover-only" : true, "hotplug" : "5", "no-pool-disable" : true, "log" : "5", "queue" : "1", "scan-time" : "60", "temp-hysteresis" : "3", "shares" : "0", "scrypt" : true, "kernel" : "scrypt", "kernel-path" : "/usr/local/bin" } Title: Re: BOUGHT A RIG NOT WORKING AT ALL PLEASE HELP Post by: ubuntucg on February 19, 2014, 04:15:35 PM go on ubuntu 12.04 should be alright then,try to use 5th gpu without riser
Title: Re: BOUGHT A RIG NOT WORKING AT ALL PLEASE HELP Post by: Starscream on February 19, 2014, 05:02:23 PM First of all use CGminer 3.7.2 or below, or use SGminer 4.0 and above.
Second, your config will only work for 1 card... Add commas and values for each card for the following variables: Example: "intensity" : "20,20,20,20", "intensity" : "20", "worksize" : "256", "lookup-gap" : "2", "thread-concurrency" : "33810", "gpu-engine" : "896", "gpu-fan" : "40-100", "gpu-memclock" : "1450", "gpu-memdiff" : "0", "gpu-powertune" : "50", "gpu-dyninternal" : "7", "gpu-threads" : "1", As far as your fifth card goes, it could be a faulty riser or you need to short your pcie as shown here: https://bitcointalk.org/index.php?topic=36061.0 Might be other stuff but I can't think of any right now. |