Title: First mining rig psu question Post by: jackkiej on February 17, 2014, 09:20:01 PM Hi guys,
I want to build my first mining rig, and I've already bought all the parts I need, but I just want to be sure everything will work fine. These are the parts I've bought: - Gygabyte GA-990FXA - SeaSonic X-1250 PSU (yes 1250W) - AMD Sempron 145 - 4X Gigabyte R9 280X - 4 usb powered risers (these (https://ip.bitcointalk.org/?u=http%3A%2F%2Fi.ebayimg.com%2Ft%2FPCI-e-express-1X-to-1X-16x-Riser-Extender-Card-with-extra-power-1M-USB-3-0-Cable-%2F00%2Fs%2FNDQxWDYwMA%3D%3D%2Fz%2FDwMAAMXQdGJRzwCz%2F%24T2eC16JHJHEFFl1d5l%2CJBRzwCzSVzw%7E%7E60_3.JPG&t=537&c=bbGDOUda9yPqYg)) - KINGSTON HyperX blu 2 x 2 GB DDR3-1600 I would like to know if 1250W is enough for this, on the extreme power supply calculator (http://www.extreme.outervision.com/psucalculatorlite.jsp) I came out on 1240W recommended.. Kind regards, Jack Title: Re: First mining rig psu question Post by: DrG on February 18, 2014, 07:29:59 AM If you undervolt the 280X you should be able to run it 1-2 years no problem since each card would pull 250W or less leaving 250W for system and component degradation.
Title: Re: First mining rig psu question Post by: johncarpe64 on February 18, 2014, 03:30:27 PM Hi guys, I want to build my first mining rig, and I've already bought all the parts I need, but I just want to be sure everything will work fine. These are the parts I've bought: - Gygabyte GA-990FXA - SeaSonic X-1250 PSU (yes 1250W) - AMD Sempron 145 - 4X Gigabyte R9 280X - 4 usb powered risers (these (https://ip.bitcointalk.org/?u=http%3A%2F%2Fi.ebayimg.com%2Ft%2FPCI-e-express-1X-to-1X-16x-Riser-Extender-Card-with-extra-power-1M-USB-3-0-Cable-%2F00%2Fs%2FNDQxWDYwMA%3D%3D%2Fz%2FDwMAAMXQdGJRzwCz%2F%24T2eC16JHJHEFFl1d5l%2CJBRzwCzSVzw%7E%7E60_3.JPG&t=537&c=bbGDOUda9yPqYg)) - KINGSTON HyperX blu 2 x 2 GB DDR3-1600 I would like to know if 1250W is enough for this, on the extreme power supply calculator (http://www.extreme.outervision.com/psucalculatorlite.jsp) I came out on 1240W recommended.. Kind regards, Jack 1250w should be enough even if you overclock alittle. Title: Re: First mining rig psu question Post by: jackkiej on February 18, 2014, 03:58:58 PM Thanks!
That is what I wanted to know :) |