|
Title: RX570 MSI ARMOR 8GB SAMSUNG Post by: Kanni on July 22, 2018, 05:27:48 PM Hello,
i have a rig of 12 MSI ARMOR RX570 8GB with 10 micron and 2 SAMSUNG. All micron work fine at 31mh+ But the two samsung dont want to up more than 1900mm with ubermix 3.1 timing. I put the ubermix 3.2 timing straps and the card can go to 2000mm now.(29mh) I see on 4GB people can up easy to 2100mm. Some people have the same issue and a solution ? https://ibb.co/nHJDby Title: Re: RX570 MSI ARMOR 8GB SAMSUNG Post by: Raja_MBZ on July 22, 2018, 10:44:38 PM I faced that very same issue recently with one of my RX 480 8 GB, and at last I found that the issue is unsolvable and GPU got damaged by heat & mining load. I'm afraid your RX 570 got damaged as well; however, don't forget to try a clean re-install of everything before you give up on the issue.
BTW, which miner are you using? Title: Re: RX570 MSI ARMOR 8GB SAMSUNG Post by: hiroshidw on July 22, 2018, 11:36:18 PM I believe you have used 1625 timming strap, this not should be used for Samsung memory, you must use custom timming or 1750 strap, then you can go with 2100+ mclock.
Title: Re: RX570 MSI ARMOR 8GB SAMSUNG Post by: Kanni on July 23, 2018, 09:02:43 AM I talk with other friend on my pool, seems to be the same for all V341-240SB.
The card is new, the card can't be damage by mining load. I use phoenix but it's same on claymore. For timing, i try 1500-1625-1750 it was the same. With 1750 the card up to 2000mclock but still low at 28mh. |