Title: rig hangs but not freeze Post by: vb.mohsen2 on July 23, 2018, 04:54:58 AM hi my rig randomly hang .i use usb watch dog but it cant recognize hang because its not freeze completely if i do some click on some window or i try to close claymore after that windows freeze completely .is there any way to diagnose the rig.or any other solution? or is any there any way to restart rig by usb watchdog when this happend?
Title: Re: rig hangs but not freeze Post by: leonix007 on July 23, 2018, 05:25:20 AM hi my rig randomly hang .i use usb watch dog but it cant recognize hang because its not freeze completely if i do some click on some window or i try to close claymore after that windows freeze completely .is there any way to diagnose the rig.or any other solution? or is any there any way to restart rig by usb watchdog when this happend? Basically if your rigs is unstable, you have to search on the culprit and must not rely on auto restarts just being proactive and not a reactive approach is much better a lot of things could cause a rig to be unstable share some infos needed in order to help you out effectively https://bitcointalk.org/index.php?topic=3191707.0 Title: Re: rig hangs but not freeze Post by: edwardceng on July 23, 2018, 05:54:34 AM hi my rig randomly hang .i use usb watch dog but it cant recognize hang because its not freeze completely if i do some click on some window or i try to close claymore after that windows freeze completely .is there any way to diagnose the rig.or any other solution? or is any there any way to restart rig by usb watchdog when this happend? a lot of things could cause a rig to be unstable
Title: Re: rig hangs but not freeze Post by: vb.mohsen2 on July 23, 2018, 06:22:11 AM ok i should say that this situation suddenly happened without any changes
this is the log that where clamore restart after 12 hours work without any problem 23:51:54:891 1d14 watchdog - thread 0 (gpu0), hb time 219 23:51:54:891 1d14 watchdog - thread 1 (gpu0), hb time 16 23:51:54:891 1d14 watchdog - thread 2 (gpu1), hb time 204 23:51:54:891 1d14 watchdog - thread 3 (gpu1), hb time 407 23:51:54:906 1d14 watchdog - thread 4 (gpu2), hb time 422 23:51:54:906 1d14 watchdog - thread 5 (gpu2), hb time 219 23:51:54:906 1d14 watchdog - thread 6 (gpu3), hb time 219 23:51:54:906 1d14 watchdog - thread 7 (gpu3), hb time 0 23:51:54:922 1d14 watchdog - thread 8 (gpu4), hb time 16 23:51:54:922 1d14 watchdog - thread 9 (gpu4), hb time 235 23:51:54:922 1d14 watchdog - thread 10 (gpu5), hb time 89735 23:51:54:938 1d14 WATCHDOG: GPU 5 hangs in OpenCL call, exit 23:51:54:938 1d14 watchdog - thread 11 (gpu5), hb time 89968 23:51:54:938 1d14 WATCHDOG: GPU 5 hangs in OpenCL call, exit 23:51:54:938 1d14 watchdog - thread 12 (gpu6), hb time 0 23:51:54:953 1d14 watchdog - thread 13 (gpu6), hb time 234 23:52:02:204 1d14 Restarting OK, exit... ----------------------------------------------- after restart a lots of log file created like this 23:52:05:017 590 23:52:05:017 590 ةححححححححححححححححححححححححححححححححححححححححححححححححححححححححححححححححป 23:52:05:033 590 ؛ Claymore's Dual GPU Miner - v11.9 ؛ 23:52:05:033 590 ؛ ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK ؛ 23:52:05:033 590 بححححححححححححححححححححححححححححححححححححححححححححححححححححححححححححححححผ 23:52:05:033 590 23:52:05:033 590 b597 23:52:05:251 590 ETH: 1 pool is specified 23:52:05:251 590 Main Ethereum pool is eu1.ethermine.org:4444 23:52:05:251 590 DCR: 0 pool is specified 23:52:38:083 185c 23:53:10:899 185c 23:53:43:715 185c 23:54:16:531 185c 23:54:49:347 185c 23:55:22:163 185c 23:55:54:979 185c 23:56:27:795 185c 23:57:00:611 185c 23:57:33:427 185c 23:57:33:427 185c Minimal speed ("-minspeed" option) was set to 175 MH/s. Miner cannot reach this speed for 5 minutes, need to restart miner! 23:57:34:677 185c Restarting OK, exit... this occure whit two gpu's "3,5" rarely gpu 0 iuse claymore 11.9 with 18.5 amd driver. now actually i use claymore 11.5 with blockchain driver before, but this happens again .with one difference .its not restart claymore but stuck on this : WATCHDOG: GPU 5 hangs in OpenCL call, exit Title: Re: rig hangs but not freeze Post by: Mohondoa on July 23, 2018, 08:38:38 AM Have you try to disable antivirus ? Sometimes antivirus make claymore unstable, so it can make the windows system unstable too. But if you have done that, i can sure your windows system need reinstall. Maybe some system file corrupt or that happen when you updated the windows. You can try to reserved update windows or disable antivirus first before reinstall it.
Title: Re: rig hangs but not freeze Post by: vb.mohsen2 on July 23, 2018, 08:49:45 AM Have you try to disable antivirus ? Sometimes antivirus make claymore unstable, so it can make the windows system unstable too. But if you have done that, i can sure your windows system need reinstall. Maybe some system file corrupt or that happen when you updated the windows. You can try to reserved update windows or disable antivirus first before reinstall it. ok ill test and report Title: Re: rig hangs but not freeze Post by: jillscarbrough on July 23, 2018, 09:08:20 AM You've asked to provide more info above. Those logs showed something went wrong (that's only the result) we need something that may cause that. As other people said above, it can be caused by various reasons:
Power Issue: then tell us PSUs that you are using OverClock - Under Volt: then tell us your current OC-UV settings. And so on.. Show us your bat file, hide your sensitive info! It will make us easier to analyze your problems. ........ 23:57:33:427 185c Minimal speed ("-minspeed" option) was set to 175 MH/s. Miner cannot reach this speed for 5 minutes, need to restart miner! 23:57:34:677 185c Restarting OK, exit... this occure whit two gpu's "3,5" rarely gpu 0 iuse claymore 11.9 with 18.5 amd driver. now actually i use claymore 11.5 with blockchain driver before, but this happens again .with one difference .its not restart claymore but stuck on this : WATCHDOG: GPU 5 hangs in OpenCL call, exit It showed that you've set (-minspeed), when your rig doesn't reach that specified amount of speed, the miner will restart nor call (-r) parameter (if -r set to "1") it will re-starting Claymore. Try to bring back your cards setting (troubled card) to default may help. Will be better to visit Claymore official thread for the best result related to your problem! https://bitcointalk.org/index.php?topic=1433925.0 Title: Re: rig hangs but not freeze Post by: Kanni on July 23, 2018, 09:26:33 AM change the riser on gpu 3,5
low a little bit the OC -10 on clock and mm and +10 mv blockchain driver use a little bit more power, dont keep it. Title: Re: rig hangs but not freeze Post by: vb.mohsen2 on July 25, 2018, 04:16:01 AM You've asked to provide more info above. Those logs showed something went wrong (that's only the result) we need something that may cause that. As other people said above, it can be caused by various reasons: i use 650 psu for every 4 aours rx570 and my wattage is under 600watt for each psu and i have no problem until now .i have another rig that i did exactly this configuration and have no problem at all.Power Issue: then tell us PSUs that you are using OverClock - Under Volt: then tell us your current OC-UV settings. And so on.. Show us your bat file, hide your sensitive info! It will make us easier to analyze your problems. ........ 23:57:33:427 185c Minimal speed ("-minspeed" option) was set to 175 MH/s. Miner cannot reach this speed for 5 minutes, need to restart miner! 23:57:34:677 185c Restarting OK, exit... this occure whit two gpu's "3,5" rarely gpu 0 iuse claymore 11.9 with 18.5 amd driver. now actually i use claymore 11.5 with blockchain driver before, but this happens again .with one difference .its not restart claymore but stuck on this : WATCHDOG: GPU 5 hangs in OpenCL call, exit It showed that you've set (-minspeed), when your rig doesn't reach that specified amount of speed, the miner will restart nor call (-r) parameter (if -r set to "1") it will re-starting Claymore. Try to bring back your cards setting (troubled card) to default may help. Will be better to visit Claymore official thread for the best result related to your problem! https://bitcointalk.org/index.php?topic=1433925.0 this is my claymore settings: EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal '''' -epsw x -cvddc 920 -mvddc 920 -minspeed 175 -ethi 6 -asm 2 -ttli 56 -tstop 72 coreclock is on the bios and its set on 1150 and memclock on 2050 and in the other rig that work without problem the cvddc and mvddc is on 900 on rx580 i tried some other clock but the problem not solved Title: Re: rig hangs but not freeze Post by: vb.mohsen2 on July 25, 2018, 04:36:48 AM change the riser on gpu 3,5 actually ill try this when new riser reach to me .but i dont think the problem is with the riserlow a little bit the OC -10 on clock and mm and +10 mv blockchain driver use a little bit more power, dont keep it. Title: Re: rig hangs but not freeze Post by: vb.mohsen2 on July 25, 2018, 06:38:12 AM its happened again
not antivirus fault next step is reinstall the windows Title: Re: rig hangs but not freeze Post by: vb.mohsen2 on July 28, 2018, 04:21:46 AM reinstall the windows and 34 hours work without problem.ill report 24-48 hours later
Title: Re: rig hangs but not freeze Post by: Tidsdilatation on July 28, 2018, 04:59:25 AM Could be anything mate. Computers are sneaky bastards ;D Right now i found my rig freezed, but i think that is becourse of this god damn heat wave northern europe is feeling right now. I acually had to shut down my rig to prevent overheating due to the weather. Its sad, but i guess its the new reality with global warming.
Title: Re: rig hangs but not freeze Post by: vb.mohsen2 on July 28, 2018, 06:40:21 AM Could be anything mate. Computers are sneaky bastards ;D Right now i found my rig freezed, but i think that is becourse of this god damn heat wave northern europe is feeling right now. I acually had to shut down my rig to prevent overheating due to the weather. Its sad, but i guess its the new reality with global warming. i use air conditioner for cooling my rigs.in my country because of drouth, electricity rationed :(Title: Re: rig hangs but not freeze Post by: adaseb on July 28, 2018, 07:05:12 AM I have this issue also with some of my rigs.
They ran fine for months and now they started crashing from time to time. What you should try to do is lower your memory clock a little and increase your memory voltage a little and see if it goes away. If it doesn't then maybe your PSU is dying. These RX gpus were always a pain to get stable. Especially difficult with the bad AMD drivers. Title: Re: rig hangs but not freeze Post by: leonix007 on July 28, 2018, 07:23:08 AM Could be anything mate. Computers are sneaky bastards ;D Right now i found my rig freezed, but i think that is becourse of this god damn heat wave northern europe is feeling right now. I acually had to shut down my rig to prevent overheating due to the weather. Its sad, but i guess its the new reality with global warming. i use air conditioner for cooling my rigs.in my country because of drouth, electricity rationed :(Are you still encountering issues? Title: Re: rig hangs but not freeze Post by: vb.mohsen2 on July 29, 2018, 04:03:27 AM Could be anything mate. Computers are sneaky bastards ;D Right now i found my rig freezed, but i think that is becourse of this god damn heat wave northern europe is feeling right now. I acually had to shut down my rig to prevent overheating due to the weather. Its sad, but i guess its the new reality with global warming. i use air conditioner for cooling my rigs.in my country because of drouth, electricity rationed :(Are you still encountering issues? thanks alot guys Title: Re: rig hangs but not freeze Post by: vb.mohsen2 on July 30, 2018, 03:54:19 AM it happened again.
Title: Re: rig hangs but not freeze Post by: vb.mohsen2 on August 09, 2018, 06:46:07 AM change riser position in rig 70 hours work
Title: Re: rig hangs but not freeze Post by: vb.mohsen2 on August 11, 2018, 04:22:29 AM one riser that have problem, stop working completely .i changed it .and this happened again after 18 hours.
Title: Re: rig hangs but not freeze Post by: vb.mohsen2 on August 13, 2018, 08:02:54 AM is there any script that use -r parameters for like" if 5 time watchdog restart claymore ,restart rig"?
you know its stuck on restarting and cant run claymore when this happend.and create a lots of log file like this Code: 09:56:34:675 100 Title: Re: rig hangs but not freeze Post by: Piskeante on August 13, 2018, 10:37:46 AM probably some problem with the batch file you have to configurate.
Are you running your cards using codes on the miner?? Normally hangs occur when some cards have a big overclock that they cannot do, or excessive undervolting. Title: Re: rig hangs but not freeze Post by: vb.mohsen2 on August 13, 2018, 02:41:39 PM probably some problem with the batch file you have to configurate. Are you running your cards using codes on the miner?? Normally hangs occur when some cards have a big overclock that they cannot do, or excessive undervolting. Quote setx GPU_FORCE_64BIT_PTR 0 this is my start filesetx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool 149.202.89.224:4444 -ewal '''' -epsw x -cvddc 920 -mvddc 920 -minspeed 175 -ethi 6 -asm 2 -ttli 56 -tstop 72 Title: Re: rig hangs but not freeze Post by: Privatoria on August 16, 2018, 04:08:20 PM You have to reinstall drivers, decrease overclocking, add more space for the swap file and check your Windows for errors by launching eventvwr.msc.
|