|
Title: Problems with 3 ASUS R9280X Post by: kjosiff on February 20, 2014, 04:16:12 AM I've created a 2nd miner, my original being a set of 3 sapphire 270xs. I ended up getting that one running with a pretty decent hash rate for the cards I was using without a to many problems.
I enjoyed setting up and running that miner very much So I figured I'd have a go at creating another. Here's my hardware. GPUs 3x R9 280X, R9280X-DC2-3GD5 Motherboard ASRock 970 Extreme4 Processor AMD Sempron 145 Memory Kingston Hyper X Blu 4 GB 1600MHz DDR3 PSU Seasonic 1300w Platinum PSU Heres my problem. I'm getting a hash of about 660kh/s each with two of the cards connected through crossfire, but then the third card which isn't connected through crossfire is getting rates at about 740kh/s. When I remove the crossfire they go down about 20kh/s. I don't understand why they are doing this. I was expecting rates at 760kh/s plus from each of the cards, and why they are going down after I remove crossfire is beyond me. I am using GUIMiner Scrypt alpha -I 13 -g 2 -w 256 --thread-concurrency 8192 I really was expecting more hash and whatever changes I make to the setting only seems to lower my hash rate. Any ideas why this may be happening? If anyone has any thoughts, thank you very much in advance. Really wanna get this going properly!! Title: Re: Problems with 3 ASUS R9280X Post by: zoran on February 20, 2014, 05:34:53 AM Perhaps u should try 990 chip motherboard and processor. (if it's really hardware issue)
Title: Re: Problems with 3 ASUS R9280X Post by: kjosiff on February 23, 2014, 11:15:42 PM Perhaps u should try 990 chip motherboard and processor. (if it's really hardware issue) I was under the impression that these 280s run perfectly fine with 970 motherboard I've been using? I never thought that could have a significant difference. I was looking at 990 when I was going to make my original purchase but opted to pay for the less expensive 970. Title: Re: Problems with 3 ASUS R9280X Post by: Asmegin on February 24, 2014, 01:27:22 AM Quote -I 13 -g 2 -w 256 --gpu-memclock 1500 --gpu-engine 1080 --gpu-powertune -20 --thread-concurrency 8192 --auto-fan --gpu-fan 30-75 --temp-cutoff 90 --temp-overheat 85 --temp-target 72 Don't use Crossfire. Undervolt to 1100 (1.1V) in Trixx for cool temps and 740kh/s. Title: Re: Problems with 3 ASUS R9280X Post by: kjosiff on February 26, 2014, 02:16:58 AM Quote -I 13 -g 2 -w 256 --gpu-memclock 1500 --gpu-engine 1080 --gpu-powertune -20 --thread-concurrency 8192 --auto-fan --gpu-fan 30-75 --temp-cutoff 90 --temp-overheat 85 --temp-target 72 Don't use Crossfire. Undervolt to 1100 (1.1V) in Trixx for cool temps and 740kh/s. We'll I'm not using crossfire anymore, but I've been seeing people reporting 760+ kh/s I was just wondering how people are getting up there while I'm capping only at 740kh/s Should I just be content with my current hash? |