Title: HELP!! 7990 in multi gpu rig? Post by: massnerder on February 22, 2014, 02:14:31 AM In need of some assistance here guys ::)
So I had this 7990 all by itself in a computer that was mining away on scrypt stuff.... doing around 1.4mh/s and really stable for a few months. I built a new mining rig and now have that 7990 in an open air setup with 3 more 7950s. All my settings are the same for this card as it was in the other computer by itself, but I am now running into 2 issues: 1) The 7990 is only giving me close to 500kh/s per gpu. As you can see I was getting 700kh/s with this card before. 2) It overheats real fast, at least one of the gpus on this card does, the other one is fine temp wise. I lowered the clocks quite a bit and still can't get it to just mine stable without overheating, not to mention the heat issue. This was not a problem before I moved the card. voltage is 1.1, tc 8192, clocks 850/1000 and 1050/1210 i 13 I have made sure to disable ulps and edit all those values in the registry (win7). I could put this card back in my gaming rig by itself and mine with it but then I would have an extra 7950 not doing anything, so even if I could make it run stable with 500kh/s this would be the better option. So what am I missing? Is there some extra step to making this run properly when in a rig with different cards that I can't seem to find? Title: Re: HELP!! 7990 in multi gpu rig? Post by: neter on February 22, 2014, 04:27:06 PM you should map devices with --gpu-map; to do this run each card with
cgminer --scrypt -d 0 <pool_info> note which gpu's temp info is raising up and then increase -d 0 to -d 1 (and so on). while doing this you can also use --gpu-fan 100,5,5,5,5 (if you have 5 gpus, if you have less or more change ,5 accordingly). This way you'll be 100% sure that the device 0,1,2... is the device you're going to target. anyway, you'll have a map like 0:2,1:3... use the map with --gpu-map 0:2,1:3 but still, if you want to be sure, use -d 0,1,2... to check whether the right card is now heating. i believe that you know what to do afterwards. cheers Title: Re: HELP!! 7990 in multi gpu rig? Post by: massnerder on March 09, 2014, 04:59:27 PM yep I tried all that. just couldn't get the 7990 to play nice in a rig with 7950s.... oh well i guess :)
|