|
Title: FEELER: 310GHs of Drillbit Boards + 30GHs of Bitfury USB's Post by: tk1337 on February 24, 2014, 02:39:47 PM *** This is a feeler only, I am not set on selling yet, I may not sell at all. ***
Drillbit Setup: 16x Drillbit 8-boards - I do not run them overclocked at all, most boards are at 19.9-20GHs, you can overclock them; When I played with overclocking (for testing purposes) I saw around 21-24GHs. 2x Miniplanes - This is used to connect four boards together. 1x Doublescroll - This is used to connect two miniplanes together, to use 2 PCI-E connections for all 8 boards. If decided to sell, the setup will not come with PSU or fans; However to note all boards are being powers off one PSU, all boards are being cooled by six Cool Master JetFlo 120mm fans. 9x Bitfury-based USB devices (mixture of Blue Fury, Red Fury, Ice Fury devices) If decided to sell, the setup will not come with USB Hubs or fans; However to note, they are running off two Rosewill 10-port powered hubs, with two 140mm fans fooling all devices. ==================================== If decided to sell, I would prefer to sell all devices together. However (if decided to sell) I may be willing to split up the USB's from the Drillbit boards. Right now this is a FEELER by no means am I selling right this second. My reasons for considering to sell are two factors: 1) I'm moving soon, I may not have an extra room for my mining hardware. 2) I am considering purchasing a single larger miner. I can provide pictures (etc) if I decide to sell; You may search through the forums, I've never had a deal "gone bad" on the forums, I've repaired hundreds of drillbit boards for the community, I have assisted in several other bitcoin community projects. I have never needed the use of escrow, however, if I decide to sell and if the buyer would like escrow, it would be up to the buyer to find a reputable escrow service & buyer assumes all setup & fees of said escrow service. Thanks for looking. Title: Re: FEELER: 310GHs of Drillbit Boards + 30GHs of Bitfury USB's Post by: Rawted on February 24, 2014, 03:53:55 PM If willing to split up the lot, I would take the Bitfury USB miners. You have very little feedback here (and none on OTC), so we would have to go with escrow or you would have to send first.
Title: Re: FEELER: 310GHs of Drillbit Boards + 30GHs of Bitfury USB's Post by: blackheart13 on February 24, 2014, 04:27:42 PM Hi,
I would be interested in all of it depending on price. Would you do escrow? Thanks Title: Re: FEELER: 310GHs of Drillbit Boards + 30GHs of Bitfury USB's Post by: IYFTech on February 24, 2014, 05:24:52 PM Where are you located? :)
Title: Re: FEELER: 310GHs of Drillbit Boards + 30GHs of Bitfury USB's Post by: tk1337 on February 24, 2014, 10:24:52 PM Title: Re: FEELER: 310GHs of Drillbit Boards + 30GHs of Bitfury USB's Post by: tunth on February 24, 2014, 11:35:31 PM I m interested in the 9x Bitfury-based USB devices, sending an pm.
Title: Re: FEELER: 310GHs of Drillbit Boards + 30GHs of Bitfury USB's Post by: sobe-it on February 24, 2014, 11:54:27 PM interested in the usb miners depending on price
Title: Re: FEELER: 310GHs of Drillbit Boards + 30GHs of Bitfury USB's Post by: ZBC3 on February 25, 2014, 01:30:29 AM TK is awesome and I would have no problem purchasing from him again.
Title: Re: FEELER: 310GHs of Drillbit Boards + 30GHs of Bitfury USB's Post by: Rawted on February 25, 2014, 02:31:13 AM Where at? I'm on the Treasure Coast. Would you be interested in meeting up if you're nearby?
Title: Re: FEELER: 310GHs of Drillbit Boards + 30GHs of Bitfury USB's Post by: tk1337 on February 25, 2014, 03:17:36 AM Where at? I'm on the Treasure Coast. Would you be interested in meeting up if you're nearby? I'm on the other side of the coast, Tampa area. @ZBC3 - Thanks ;) As for this thread, I'm locking it, I've decided not to sell anything at this current time. |