Title: How to switch to ssl using claymore? Post by: crairezx20 on August 18, 2018, 07:23:25 PM I hope this time someone can help me how to switch stratum config into SSL config on claymore.
I'm tried to change the stratum pool to ssl:// then change the port to 5555 but it doesn't work. Check this setup. Code: setx GPU_FORCE_64BIT_PTR 0 Title: Re: How to switch to ssl using claymore? Post by: hiroshidw on August 18, 2018, 08:39:38 PM you must change from -pooll to -epool like this:
-epool ssl://eu1.ethermine.org:5555 Title: Re: How to switch to ssl using claymore? Post by: crairezx20 on August 19, 2018, 04:20:23 PM you must change from -pooll to -epool like this: No it doesn't work its still showing ''trying to reconnect in 20sec'' and it always repeating.-epool ssl://eu1.ethermine.org:5555 Do you have sample configutation? I would like to switch to ssl because ssl connection gives me more stable hashrate than stratum connection. This is just based on what I experienced on phoenix miner so I would like to test it on claymore because I feel that my hashrate stolen with phoenix miner. Title: Re: How to switch to ssl using claymore? Post by: Vann on August 19, 2018, 04:47:28 PM The string you posted has an extra 1 after -pool. It should be
Code: -epool stratum+ssl://eu1.ethermine.org:5555 The rest is correct. If it's still not connecting, check your Windows Firewall rules. Title: Re: How to switch to ssl using claymore? Post by: fapar on August 19, 2018, 04:53:30 PM I hope this time someone can help me how to switch stratum config into SSL config on claymore. I'm tried to change the stratum pool to ssl:// then change the port to 5555 but it doesn't work. Apparently, now the SSL server is only available for ETC. It is easy to check by running the miner with an indication of the server -epool ssl://eu1-etc.ethermine.org:5555 - an encrypted connection will be established. Title: Re: How to switch to ssl using claymore? Post by: hiroshidw on August 19, 2018, 09:55:03 PM For ETH pool using US server
Quote setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool ssl://us1.ethermine.org:5555 -ewal YOUWALLET.WORKER -epsw x -mode 1 For ETC pool using US server Quote setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool ssl://us1-etc.ethermine.org:5555 -ewal YOUWALLET.WORKER -epsw x -mode 1 Title: Re: How to switch to ssl using claymore? Post by: crairezx20 on August 21, 2018, 02:41:45 AM I hope this time someone can help me how to switch stratum config into SSL config on claymore. I'm tried to change the stratum pool to ssl:// then change the port to 5555 but it doesn't work. Apparently, now the SSL server is only available for ETC. It is easy to check by running the miner with an indication of the server -epool ssl://eu1-etc.ethermine.org:5555 - an encrypted connection will be established. For ETH pool using US server This config doesn't work to me. Quote setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool ssl://us1.ethermine.org:5555 -ewal YOUWALLET.WORKER -epsw x -mode 1 For ETC pool using US server Quote setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool ssl://us1-etc.ethermine.org:5555 -ewal YOUWALLET.WORKER -epsw x -mode 1 What do you think is the problem with claymore because I can connect on SSL with Phoenix. Title: Re: How to switch to ssl using claymore? Post by: leonix007 on August 21, 2018, 02:57:53 AM I hope this time someone can help me how to switch stratum config into SSL config on claymore. I'm tried to change the stratum pool to ssl:// then change the port to 5555 but it doesn't work. Apparently, now the SSL server is only available for ETC. It is easy to check by running the miner with an indication of the server -epool ssl://eu1-etc.ethermine.org:5555 - an encrypted connection will be established. For ETH pool using US server This config doesn't work to me. Quote setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool ssl://us1.ethermine.org:5555 -ewal YOUWALLET.WORKER -epsw x -mode 1 For ETC pool using US server Quote setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool ssl://us1-etc.ethermine.org:5555 -ewal YOUWALLET.WORKER -epsw x -mode 1 What do you think is the problem with claymore because I can connect on SSL with Phoenix. Can you possibly post your .bat file? I remember the pictures posted in claymore thread, with the ff catched errors reloading epools.txt cannot resolve SSL and ssl:0 I was thinking it checks epools.txt with incorrect SSL url and port Title: Re: How to switch to ssl using claymore? Post by: crairezx20 on August 21, 2018, 05:25:40 AM I hope this time someone can help me how to switch stratum config into SSL config on claymore. I'm tried to change the stratum pool to ssl:// then change the port to 5555 but it doesn't work. Apparently, now the SSL server is only available for ETC. It is easy to check by running the miner with an indication of the server -epool ssl://eu1-etc.ethermine.org:5555 - an encrypted connection will be established. For ETH pool using US server This config doesn't work to me. Quote setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool ssl://us1.ethermine.org:5555 -ewal YOUWALLET.WORKER -epsw x -mode 1 For ETC pool using US server Quote setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool ssl://us1-etc.ethermine.org:5555 -ewal YOUWALLET.WORKER -epsw x -mode 1 What do you think is the problem with claymore because I can connect on SSL with Phoenix. Can you possibly post your .bat file? I remember the pictures posted in claymore thread, with the ff catched errors reloading epools.txt cannot resolve SSL and ssl:0 I was thinking it checks epools.txt with incorrect SSL url and port Start.bat (https://www73.zippyshare.com/v/yVa3uy5l/file.html) epools.txt (https://www73.zippyshare.com/v/x6ALraWY/file.html) Title: Re: How to switch to ssl using claymore? Post by: leonix007 on August 21, 2018, 07:00:09 AM that Zippyshare is so messy and couldn't even download or view start.bat, those ads are so freakin irritating
Apology, I don't have patience on dealing with those ads if you could post it here then its a worthy pleasure mate Title: Re: How to switch to ssl using claymore? Post by: sxemini on August 21, 2018, 07:03:09 AM which claymore version you are using? it looks like an old version without ssl support.
Title: Re: How to switch to ssl using claymore? Post by: crairezx20 on August 21, 2018, 08:31:09 AM that Zippyshare is so messy and couldn't even download or view start.bat, those ads are so freakin irritating Sorry, I thought that the zippyshare is a good hosting.Apology, I don't have patience on dealing with those ads if you could post it here then its a worthy pleasure mate Here is the start.bat Code: setx GPU_FORCE_64BIT_PTR 0 And here is for epools.txt Code: # WARNING! Remove "#" characters to enable lines, with "#" they are disabled and will be ignored by miner! Check README for details. Title: Re: How to switch to ssl using claymore? Post by: leonix007 on August 21, 2018, 09:27:14 AM that Zippyshare is so messy and couldn't even download or view start.bat, those ads are so freakin irritating Sorry, I thought that the zippyshare is a good hosting.Apology, I don't have patience on dealing with those ads if you could post it here then its a worthy pleasure mate Here is the start.bat Code: setx GPU_FORCE_64BIT_PTR 0 And here is for epools.txt Code: # WARNING! Remove "#" characters to enable lines, with "#" they are disabled and will be ignored by miner! Check README for details. Mate, your .bat is fine tested on one of my Rig https://imgur.com/LfqQez6 https://imgur.com/jAIqakQ take note that I add an index -di option as my rig is mining in other pools with other gpus are you using the latest version of Claymore? Title: Re: How to switch to ssl using claymore? Post by: crairezx20 on August 21, 2018, 01:55:04 PM Mate, your .bat is fine The latest claymore doesn't work to me or it looks like its blocking with windows defender. tested on one of my Rig https://imgur.com/LfqQez6 https://imgur.com/jAIqakQ take note that I add an index -di option as my rig is mining in other pools with other gpus are you using the latest version of Claymore? I'm using claymore 11.0 but I tried to download the latest claymore when trying to open the start.bat it won't start and when editing the start.bat it doesn't open. It looks like the defender blocking the latest version of Claymore. Edit: It's working now and I excluded the claymore from defender settings and then the v11.0 doesn't work but the latest one v11.9 its working fine on SSL connection. Anyway, guys thanks for the help. |