Title: s9i no chips
Post by: Rodderman on August 31, 2018, 02:07:48 AM
Anyone ever have this issue and resolved it? I have reset to default and flashed the latest firmware Miner Type Antminer S9i Hostname antMiner Model GNU/Linux Hardware Version 22.0.1.3 Kernel Version Linux 3.14.0-xilinx-ge8a2f71-dirty #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017 File System Version Tue May 22 20:08:17 CST 2018 Logic Version S9i_VTest BMminer Version 2.0.0 Uptime 12 Load Average 0.53, 0.23, 0.10
main.c:13690: log_level = 4 main.c:13717: This is XILINX board. Totalram: 507527168 main.c:13729: Detect 512MB control board of XILINX driver-bitmain.c:1003: forceFreq=-1 forceFlag=0 main.c:8280: DETECT HW version=0000c516 main.c:13756: miner ID : 8018f5ca4e104814 main.c:13781: Miner Type = S9 main.c:13793: AsicType = 1387 main.c:13796: real AsicNum = 63 main.c:13889: use critical mode to search freq... driver-bitmain.c:2401: get PLUG ON=0x000000e0 driver-bitmain.c:2471: Find hashboard on Chain[5] driver-bitmain.c:2471: Find hashboard on Chain[6] driver-bitmain.c:2471: Find hashboard on Chain[7] driver-bitmain.c:1840: set_reset_allhashboard = 0x0000ffff main.c:2049: Check chain[5] PIC fw version=0x03 main.c:2049: Check chain[6] PIC fw version=0x03 main.c:2049: Check chain[7] PIC fw version=0x03 main.c:8664: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] main.c:8706: has freq in PIC, will disable freq setting. main.c:8805: chain[5] has freq in PIC and will jump over... main.c:8809: Chain[5] has core num in PIC main.c:8819: Chain[5] ASIC[17] has core num=4 main.c:2049: Check chain[5] PIC fw version=0x03 main.c:8664: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] main.c:8706: has freq in PIC, will disable freq setting. main.c:8805: chain[6] has freq in PIC and will jump over... main.c:8809: Chain[6] has core num in PIC main.c:2049: Check chain[6] PIC fw version=0x03 main.c:8664: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] main.c:8706: has freq in PIC, will disable freq setting. main.c:8805: chain[7] has freq in PIC and will jump over... main.c:8809: Chain[7] has core num in PIC main.c:2049: Check chain[7] PIC fw version=0x03 main.c:8883: get PIC voltage=6 on chain[5], value=940 main.c:8883: get PIC voltage=6 on chain[6], value=940 main.c:8883: get PIC voltage=6 on chain[7], value=940 driver-bitmain.c:1840: set_reset_allhashboard = 0x00000000 main.c:9046: chain[5] temp offset record: 62,0,0,0,0,0,35,28 main.c:9063: chain[5] temp chip I2C addr=0x98 main.c:9069: chain[5] has no middle temp, use special fix mode. main.c:9046: chain[6] temp offset record: 62,0,0,0,0,0,35,28 main.c:9063: chain[6] temp chip I2C addr=0x98 main.c:9069: chain[6] has no middle temp, use special fix mode. main.c:9046: chain[7] temp offset record: 62,0,0,0,0,0,35,28 main.c:9063: chain[7] temp chip I2C addr=0x98 main.c:9069: chain[7] has no middle temp, use special fix mode. driver-bitmain.c:1840: set_reset_allhashboard = 0x0000ffff driver-bitmain.c:1840: set_reset_allhashboard = 0x00000000 main.c:9297: CRC error counter=0 main.c:9312: set command mode to VIL main.c:9384: --- check asic number main.c:9481: After Get ASIC NUM CRC error counter=0 main.c:9504: set_baud=0 main.c:10423: The min freq=700 main.c:10425: set real timeout 52, need sleep=379392 main.c:12545: After TEST CRC error counter=0 driver-bitmain.c:1840: set_reset_allhashboard = 0x0000ffff driver-bitmain.c:1840: set_reset_allhashboard = 0x00000000 main.c:13954: search freq for 1 times, completed chain = 3, total chain num = 3 board_frq_tuning.c:583: single_board_frq_tuning enter board_frq_tuning.c:584: min_rate, des_rate, fix_volt:13800, 14000, 880 board_frq_tuning.c:127: force_freq not set, don't need tuning driver-bitmain.c:1840: set_reset_allhashboard = 0x0000ffff driver-bitmain.c:1840: set_reset_allhashboard = 0x00000000 main.c:14332: restart Miner chance num=5 main.c:14372: waiting for receive_func to exit! main.c:14386: waiting for pic heart to exit! main.c:13645: bmminer not found= 1378 root 0:00 grep bmminer
main.c:14430: bmminer not found, restart bmminer ... This is user mode for mining Detect 512MB control board of XILINX Miner Type = S9 Miner compile time: Tue May 22 20:08:17 CST 2018 type: Antminer S9i set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x00000000 set_reset_allhashboard = 0x0000ffff miner ID : 8018f5ca4e104814 set_reset_allhashboard = 0x0000ffff Checking fans!get fan[2] speed=5760 get fan[2] speed=5760 get fan[2] speed=5760 get fan[5] speed=5760 get fan[2] speed=5760 get fan[5] speed=5760 get fan[2] speed=5760 get fan[5] speed=5760 chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] Detect: use voltage limit rules on single board! Detect: S9_63 use voltage level=1 : 1 Chain[J6] has backup chain_voltage=870 Check chain[5] PIC fw version=0x03 chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] Detect: use voltage limit rules on single board! Detect: S9_63 use voltage level=1 : 1 Chain[J7] has backup chain_voltage=910 Check chain[6] PIC fw version=0x03 chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] Detect: use voltage limit rules on single board! Detect: S9_63 use voltage level=1 : 1 Chain[J8] has backup chain_voltage=910 Check chain[7] PIC fw version=0x03 Chain[J6] orignal chain_voltage_pic=6 value=940 Chain[J6] will use backup chain_voltage_pic=870 [125] Chain[J6] get working chain_voltage_pic=125 Chain[J7] orignal chain_voltage_pic=6 value=940 Chain[J7] will use backup chain_voltage_pic=910 [57] Chain[J7] get working chain_voltage_pic=57 Chain[J8] orignal chain_voltage_pic=6 value=940 Chain[J8] will use backup chain_voltage_pic=910 [57] Chain[J8] get working chain_voltage_pic=57 set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x00000000 Chain[J6] has 0 asic set_reset_hashboard = 0x00000020 set_reset_hashboard = 0x00000000 retry Chain[J6] has 0 asic set_reset_hashboard = 0x00000020 set_reset_hashboard = 0x00000000 retry Chain[J6] has 0 asic set_reset_hashboard = 0x00000020 set_reset_hashboard = 0x00000000 retry Chain[J6] has 0 asic set_reset_hashboard = 0x00000020 set_reset_hashboard = 0x00000000 retry Chain[J6] has 0 asic set_reset_hashboard = 0x00000020 set_reset_hashboard = 0x00000000 retry Chain[J6] has 0 asic set_reset_hashboard = 0x00000020 set_reset_hashboard = 0x00000000 retry Chain[J6] has 0 asic Chain[J7] has 0 asic set_reset_hashboard = 0x00000040 set_reset_hashboard = 0x00000000 retry Chain[J7] has 0 asic set_reset_hashboard = 0x00000040 set_reset_hashboard = 0x00000000 retry Chain[J7] has 0 asic set_reset_hashboard = 0x00000040 set_reset_hashboard = 0x00000000 retry Chain[J7] has 0 asic set_reset_hashboard = 0x00000040 set_reset_hashboard = 0x00000000 retry Chain[J7] has 0 asic set_reset_hashboard = 0x00000040 set_reset_hashboard = 0x00000000 retry Chain[J7] has 0 asic set_reset_hashboard = 0x00000040 set_reset_hashboard = 0x00000000 retry Chain[J7] has 0 asic Chain[J8] has 0 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 0 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 0 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 0 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 0 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 0 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 0 asic miner total rate=0GH/s fixed rate=0GH/s
Miner fix freq ... max freq = 100 set baud=1 driver-btm-c5.c:15225:bitmain_c5_init: start thread for read temp setStartTimePoint total_tv_start_sys=187 total_tv_end_sys=188 driver-btm-c5.c:10403:read_temp_func: last_testpatten_highest_pcb_temp = -100 restartNum = 5 , auto-reinit enabled... do read_temp_func once... Done check_asic_reg Max pcb temp : -100 set FAN speed according to: temp_highest=-100 temp_top1[PWM_T]=-100 temp_top1[TEMP_POS_LOCAL]=-100 temp_change=0 fix_fan_steps=0 FAN PWM: 6 read_temp_func Done! CRC error counter=0
Title: Re: s9i no chips
Post by: Rodderman on August 31, 2018, 04:42:26 PM
I guess my miner needs a repair shop, tried the boards on a working unit and they all three report 0 asics and may not even be worth the repair costs
Title: Re: s9i no chips
Post by: fanatic26_ on August 31, 2018, 04:45:02 PM
Considering a brand new s9 is under $500 right now there is no reason to try and repair the boards as it will cost you just as much as a new unit. Being an s9i, it cant be that old, is it still under warranty?
Title: Re: s9i no chips
Post by: Rodderman on August 31, 2018, 05:08:54 PM
Considering a brand new s9 is under $500 right now there is no reason to try and repair the boards as it will cost you just as much as a new unit. Being an s9i, it cant be that old, is it still under warranty?
Yes a warranty, but shipping back to Bitmain would cost, the unit was shipped with others on 2018-05-25 13:54:57
Title: Re: s9i no chips
Post by: fanatic26_ on August 31, 2018, 06:00:03 PM
If you are in the US there are multiple depots to ship to, you dont have to send it back to China anymore.
|