Title: AtraxMiner Post by: poweratrax on March 03, 2014, 05:34:59 PM AtraxMiner
Features Here's what it has to offer: It's ultra fast - AtraxMiner implements the BFI_INT instruction, which can improve performance by 50-200% It's as efficient as theoretically possible (that is, it doesn't discard any work unless that work would be invalid) It's free, open-source software - It's available under the X11 license, and written in (fairly) well-documented and commented C++. It loads kernels dynamically - If someone releases a more efficient kernel for our miner, it's as simple as dropping in the new kernel and using it. It has a simple command-line interface - Obviously "simple" is subjective, but it's pretty easy to get started using. - Example usage Open AtraxMiner and wait until it will download all required kernels and it will configure. To connect to a pool such as Slush's using our miner and Phateus's phatk2 kernel, you would use a command line such as: AtraxMiner -u http://USERNAME.WORKERNAME:PASSWORD@api2.bitcoin.cz:8332/ -k phatk2 DEVICE=0 VECTORS BFI_INT AGGRESSION=4 ...where DEVICE=0 instructs it to use OpenCL device #0, VECTORS has it run 2-way vectors, BFI_INT enables the BFI_INT instruction in newer ATI GPUs, and AGGRESSION can be used to tweak execution size (similar to poclbm's -f) If you want to tweak the askrate, (since the default is 10 without LP, or none with LP enabled servers) you can use something like this: phoenix -u http://USERNAME.WORKERNAME:PASSWORD@api2.bitcoin.cz:8332/;askrate=5 -k phatk2 DEVICE=0 VECTORS BFI_INT AGGRESSION=4 This should only be used on pools that don't support RPC LP or MMP. Don't set AGGRESSION=10 , it will overheat your graphic card in 5 minutes. Download Latest version: 2.0.3 Windows binaries: http://www.sendspace.com/file/h0hu2j |