|
Title: How to overclock NVIDIA GPUs in Linux HiveOS ? Post by: samet_9511 on September 14, 2018, 12:15:26 AM First, I set default WATT for the GPU. (75W for GTX1050TI, 120W for GTX1060, 151W for GTX1070) if memory is important for the algo, i set memory to higher value till the miner software reports error. if coreis important for the algo, i set core to higher value till the miner software reports error. what if core and memory is important at the same time ? Title: Re: How to overclock NVIDIA GPUs in Linux HiveOS ? Post by: MATHReX on September 15, 2018, 03:33:05 PM Your default power consumption for the above GPUs is still very high.
Try to decrease the power limit percentage rather than setting a power limit on them. If the core and memory both are important, try to work out as same as you are doing with memory or core, until it hits the error and if still, they are not stable. Underclock a bit. |