|
Title: CryptoNight n70 + bitmain 1600w Post by: bukz on September 28, 2018, 10:53:27 AM hey guys i have a bitmain 1600w power supply, it arrived with a 10amp chinese outlet, i plugged it in with a typical 10amp usa outlet into a 110. doesn't seem to be powering up. would it be a faulty power supply or will it only start with two n70s plugged in? im running in on 110v outlet
Title: Re: CryptoNight n70 + bitmain 1600w Post by: Hockeybum on September 28, 2018, 11:50:18 AM What is the model number of the power supply?
The APW3+-12-1600 will only start at voltages above 205 volts The APW3++ will start at voltages between 95-105 volts but the rated power on 110v is only 1200 watts Title: Re: CryptoNight n70 + bitmain 1600w Post by: philipma1957 on September 28, 2018, 01:52:57 PM yeah maybe you don't have the correct bitmain psu to run on 110 volt
this one is the one that works with 110-240 volts https://www.amazon.com/AntMiner-Power-Supply-1200W-Connectors/dp/B076CM9F7Q/ref=sr_1_5? you mention n70 plugged into it what is an n70 is it this? http://www.baikalminer.com/product15.php if it is these pull only 220 watts you should be able to run 2 on the correct psu if you need a different psu here is a link https://www.corsair.com/us/en/Categories/Products/Certified-Refurbished/Power-Supplies/RMx-Series%E2%84%A2-RM1000x-%E2%80%94-1000-Watt-80-PLUS%C2%AE-Gold-Certified-Fully-Modular-PSU-%28NA%29-%28Refurbished%29/p/CP-9020094-NA/RF Title: Re: CryptoNight n70 + bitmain 1600w Post by: bukz on September 28, 2018, 09:00:08 PM G1114b
https://www.newegg.com/Product/Product.aspx?Item=9SIAC5F6UM3124&ignorebbr=1 this is the one i have, i have tried a few different coords so it must need atleast 200w :-X What is the model number of the power supply? The APW3+-12-1600 will only start at voltages above 205 volts The APW3++ will start at voltages between 95-105 volts but the rated power on 110v is only 1200 watts Title: Re: CryptoNight n70 + bitmain 1600w Post by: tim-bc on September 28, 2018, 09:15:01 PM https://www.newegg.com/Product/Product.aspx?Item=9SIAC5F6UM3124&ignorebbr=1 Yes, you can see in the description that:this is the one i have, i have tried a few different coords so it must need atleast 200w :-X Voltage Range: AC 176~264 V Title: Re: CryptoNight n70 + bitmain 1600w Post by: xxcsu on September 29, 2018, 02:32:45 AM hey guys i have a bitmain 1600w power supply, it arrived with a 10amp chinese outlet, i plugged it in with a typical 10amp usa outlet into a 110. doesn't seem to be powering up. would it be a faulty power supply or will it only start with two n70s plugged in? im running in on 110v outlet G1114b https://www.newegg.com/Product/Product.aspx?Item=9SIAC5F6UM3124&ignorebbr=1 this is the one i have, i have tried a few different coords so it must need atleast 200w :-X - thats not a Bitmain Power Supply at all :) - Its a ???? Eyoyo Brand ???? Very confusing item description on newegg :) platinum conversion rate 1600W mining power supply, real full 1600W (1800W Max) power supply, maximum power only 1200W if 110V main power, Input Rated Voltage:AC200~240V Descriptions: Input Characteristic Voltage Range: AC 176~264 V Input Rated Voltage: AC 200~240 V Starting Inrush Current: =80 A Maximum Input Current: =10 A Efficiency: =92% |