|
Title: Attempting My First GPU Mining Rig -> "invalid device ordinal" Post by: betajuice on October 05, 2018, 08:41:24 PM I'm trying to setup my first GPU mining rig, but Claymore's Dual Miner is running into the error:
Code: cudaGetDeviceCount returned error 10 and I'm not sure what the problem is (I have been searching). Specs: OS: Ubuntu 18.04 Mining Software: Claymore's Dual GPU Miner - v11.9 command: "ethdcrminer64 -epool us1.ethermine.org:4444 -ewal [my_eth_address] -epsw x" GPUs: (4x) GIGABYTE GeForce GTX 1070 Ti Mobo: Asrock H110 Pro BTC+ PSU: CORSAIR HXi Series HX1200i 1200W 80 PLUS PLATINUM CPU: Intel Celeron G3930 Kaby Lake Dual-Core 2.9 GHz Memory: Patriot Signature Line 8GB (2 x 4GB) 288-Pin DDR4 The GPU's are connected via PCIe risers, and also all powered to the PSU. I also have the mobo extra molex power plugged in (2x). Any help is appreciated, thanks Title: Re: Attempting My First GPU Mining Rig -> "invalid device ordinal" Post by: betajuice on October 05, 2018, 09:40:39 PM This has been resolved.
The problem is my GPU's were not fully powered. Title: Re: Attempting My First GPU Mining Rig -> "invalid device ordinal" Post by: MP_SI on October 06, 2018, 11:58:48 AM So is the rig operational now and what will you mine?
Title: Re: Attempting My First GPU Mining Rig -> "invalid device ordinal" Post by: betajuice on October 18, 2018, 09:30:49 PM So is the rig operational now and what will you mine? I've been mining ethereum! Got my electric rate down to 7 cents / kWh and so its even profitable (not by a lot, but still). I have 4 nvidia cards mining, the 2 amd cards still not configured yet, need to get the drivers installed properly (my guess) |