|
Title: Asus R9 290 problems with Intensity Post by: PDcologne on March 07, 2014, 11:50:37 AM Hi guys - so im having issues...
i decided to build another rig this time using Asus 290's not X. i have built many many rigs based on 280x with not many issues but this time im stumped. so 3 x Asus 290 all being detected as i would expect running via windows 7 64bit in cgminer 3.7.2 i came to write the BAT file and the issues start, as soon as i enter an intensity number over stock(8) i get HW errors galore. Everyone seems to be running these cards at 20 with no problems.... if i run without an intensity number specified everything runs fine... everything else is tweaked. problem is it is only hashing at 30kh/s or something like that... ideas? full spec 3 x Asus r9 290 asrock MB - fatal1ty z77 80+ platinum PSU 1200w 6GB ram intel something processor windows 7 cgminer 3.7.2 drivers 13.2 suite - i thought this could be my problem, but have used this fine on every build i have done Title: Re: Asus R9 290 problems with Intensity Post by: juggalodarkclow on March 07, 2014, 01:52:38 PM setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1 add these flags to the first line of your .bat file and report back Title: Re: Asus R9 290 problems with Intensity Post by: PDcologne on March 07, 2014, 01:56:44 PM setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 add these flags to the first line of your .bat file and report back hi thanks for the reply - maybe i should have added a config... the info you have provided is standard in my configs, as i said i have built many rigs - but this is the first time i have had any real problems. Title: Re: Asus R9 290 problems with Intensity Post by: MrLao on March 07, 2014, 11:51:36 PM Have you tried lower TC like 24550?
|