|
Title: Antminer T9+ not recognizing hashboards after Dollemizer flash Post by: andrewlove on October 25, 2018, 02:25:53 PM I recently tried to flash the Dollemizer firmware on my brand new T9+ and afterward my miner won't recognize any of my hashboards. I tried to hard reset my miner and also flash the original firmware back onto the miner with no luck. I have no idea how to fix this and all I'm getting from Bitmain is to try a known working control board, which I don't have access too. Any insight would be helpful. Thanks!
Title: Re: Antminer T9+ not recognizing hashboards after Dollemizer flash Post by: thierry4wd on October 25, 2018, 02:41:45 PM "hi" ?
Please shearch on forum. thanks. Title: Re: Antminer T9+ not recognizing hashboards after Dollemizer flash Post by: fanatic26_ on October 25, 2018, 05:27:33 PM The best insight i can give is to read an entire thread before you try a firmware known to have serious problems and an inability to be removed :-\
You might try reading through the whole thread to see what others have done. Title: Re: Antminer T9+ not recognizing hashboards after Dollemizer flash Post by: mikeywith on October 25, 2018, 06:49:14 PM check this out > https://bitcointalk.org/index.php?topic=5032987.0
|