Title: mining with 2nd GPU error Post by: goldap on October 31, 2018, 11:28:15 PM hi guys i have a pc that works fine with 1st gpu 1050ti and i installed a 2nd gpu today from my other altcoin mining PC a gtx 1070ti, the card was fully functional in the pc i took it out from.
after i installed it the pc booted up fine and works normal. the 2nd gpu is detected in device manager but not in msi afterburner or anything else, i tried gpu-z and its detected there too. in device manger it says error 43 windows has stopped this device. i tried restarted pc didnt work to fix the problem i also tried going to nvidia website and manually downloading and installing the 1070ti updated drivers which succeeded but at the end of installation it says the same or newer verson is already installed. any help appreciated. pc specs: i5 7400 intel cpu 600w psu 16gb ddr4 ram windows 10 1050ti gpu (primary gpu) 1070ti (2nd gpu) gigabyte z270 gaming k3 mobo here is a ss of the error: https://imgur.com/a/zzLtWU4 tl;dr removed working mining card from miner to put in gaming pc, mining card detected but error 43 from windows, what do? Title: Re: mining with 2nd GPU error Post by: abstractHaze on November 01, 2018, 12:42:03 AM run the pc with just the 1070.
then report. (in the slot where the 1050 is) Title: Re: mining with 2nd GPU error Post by: goldap on November 01, 2018, 12:46:49 AM run the pc with just the 1070. then report. (in the slot where the 1050 is) ok i`ll try that now Title: Re: mining with 2nd GPU error Post by: goldap on November 01, 2018, 01:15:09 AM run the pc with just the 1070. then report. (in the slot where the 1050 is) fuck me so stupid, when i opened the case the psu 6pin connected to the 1070 was loose! i was sure i pressed it in with a click before i closed the case, but i had to push it in pretty hard and that probably made the connector come out, thank you for making me re-open the case, after pushing it back in the card is detected and working fine, thanks again :) :D ;D :D this topic can be closed |