|
Title: Unlock PCB TEMP on minerStatus , for S9 Post by: thierry4wd on November 03, 2018, 11:05:33 AM Hi ! I have the pleasure to share my little mod for the status of the miner!
You will find the temperature of the card on: "PCB Temp" previously empty on Temp (chip 1) I also perssonaliser Fan 3 and fan 6 in "Intake and Outake) to find you! it is not much, but I think it can help a lot of people, especially if you have changed the bmminer and your chip times are incorrect! the temp pcb it is constant and therefore will serve as a reference! ;) be sure to find the file here: http://www.k-upload.fr/afficher-fichier-2018-11-04-1faaf74daminerstatus.cgi.html All you have to do is go to "/ www / pages / cgi-bin" and replace "minerStatus.cgi" with my file;) do not forget to rename the "minerStatus.cgi" in "minerStatus-old.cgi" in case of problem you can restore it! but there is no reason! and in the worst case you can always restore an original firmware! ;) With pleasure! Title: Re: Unlock PCB TEMP on minerStatus , for S9 Post by: sohail289 on November 04, 2018, 06:41:49 AM not sure which one fan ;D but for temperatures its good mod :)
S9 13.5t LPM 1102 https://preview.ibb.co/kjw0nf/s9.jpg Title: Re: Unlock PCB TEMP on minerStatus , for S9 Post by: thierry4wd on November 04, 2018, 10:02:23 AM Oh yes, I had forgotten this details! original fan are on 3 and 6, but with LPM it is on fan 5 and 6 ... the constant is Fan 6 ...
In reality (Intake) and (Outake) means nothing, because if you reverse the plug of the fan it does not make sense;) but it is only a reference, I recognize that is not a big deal lol thing I uploaded with the error corrected in the first post Title: Re: Unlock PCB TEMP on minerStatus , for S9 Post by: sohail289 on November 11, 2018, 09:32:59 PM did you compile 1102 LPM bmminer with 895mv and different volts? if did then share it please
Title: Re: Unlock PCB TEMP on minerStatus , for S9 Post by: thierry4wd on November 11, 2018, 09:45:56 PM I worked a lot on top of it ... and burn an S9 controller for that: who pays for it? In my principle nothing is free in life, I already made a version including all my mod (fan control, pcb temp, freq control even on auto firmware, control voltage by 5mv, and Asicboost) that can update via the minor easily, but free, I have integrated a note of donation on btc for those who want, but in reality I do not believe in this world there are no gifts ... I'm looking a way to include a small 1% fee in my firmware, I probably would not succeed first and I probably would not win anything but it's my fasson to see, I'm a little in this world, only some minor, and I do not have the means to turn them, so I try to get away with it as best I can:... :D
if a perssonne wants to help me integrate it (even in soft so easily removable) I am a taker :) and with pleasure that I share it with you! ;) Have you good! you can turn with no fee, and I'm interested in that! Title: Re: Unlock PCB TEMP on minerStatus , for S9 Post by: sohail289 on November 12, 2018, 02:57:28 PM im using braiins fw it was fine with voltage control but the only problem was fan control. miner always run at 81c to 82c . they set lower auto fan. maybe i do something with cgminer for fan control. but i don't have plan to buy more asics in future so thats cause laziness ;D
good luck for your efforts :-* |