|
Title: Rig reset itself after mining has started ??? Post by: kral_658 on December 04, 2018, 11:01:34 PM Code: 12 x AMD RX570 4GB Asus Rog Strix Gaming OC Edition This rig was working well till yesterday. What happened i dont know. The problem is the rig reset itself after mining started a few minutes. I tried to fix the problem but nothing helped. -Driver uninstallation by DDU. -Reset. -Driver installation. -Reset. -Patch. -Reset. -Set all cards to compute mode. -Reset -Start mining software without overclock. -The mining rig reset itself after a few minutes. I tried to load original bios and tried again. The same thing happens. What should I do ? Title: Re: Rig reset itself after mining has started ??? Post by: abstractHaze on December 05, 2018, 01:37:45 AM 1 gpu at a time. ty.
Title: Re: Rig reset itself after mining has started ??? Post by: adaseb on December 05, 2018, 07:33:41 AM Like the above poster said. Try 1 GPU at a time and see which one is causing the hangs.
I am thinking you got some bad riser, or maybe a PSU went bad or maybe some +12V wires are melted. Try one GPU at a time and see if you can pinpoint the issue. Also did you try stock voltages? Maybe you undervolted too much. Title: Re: Rig reset itself after mining has started ??? Post by: kral_658 on December 05, 2018, 10:09:09 AM Like the above poster said. Try 1 GPU at a time and see which one is causing the hangs. I am thinking you got some bad riser, or maybe a PSU went bad or maybe some +12V wires are melted. Try one GPU at a time and see if you can pinpoint the issue. Also did you try stock voltages? Maybe you undervolted too much. tried with stock voltage. i will try one by one. i think the termal paste can be problem. 3 of the gpu are 2 years old. |