|
Title: [Solved] Getting errors after cleaning rig Post by: Imm0wzz on February 19, 2019, 12:15:06 PM Hi,
Yesterday I decided to clean my rigs and blow some dust of of them. The rig was running for almost a year, with minor errors. Mostly because of the heat in the summer or a faulty riser. Untill yesterday it was running just fine. But then there was a power outage in my town yesterday, just before I was going to work. So I turned off all the rigs before the power got back on while I'm at work. I brought a air compressor from work to remove the dust of my rigs. So I took them outside and cleaned all 4 of my rigs. Then I connected them again, first 3 are running without any problems. Then I started with the 4th one. It gone down after a couple of minutes and rebooted, over and over again. So I thought a riser broke while cleaning the rig. I removed them one by one to see if I could find the faulty one, no succes. This morning I decided to connect them one by one, to see which one is causing problems. The first one gave an error right after starting up the mining, so I've installed a new complete riser. Still errors. Shit.. did I detroy a GPU? On to the next one, again a error at starting up. And then 2 more after that. Now I'm thinking my motherboard is broken?! Mostly getting these error when there's a faulty riser, but now all GPU's give this error... I also tried without overclocking settings. Anyone know what to do or try next? My setup: Motherboard: Gigabyte B250-FinTech PSU: LC-Power LC1800 V2.31 Mining Edition RAM: Crucial DDR4 2400 4GB GPU: 10x Gigabyte Aorus RX 580 8GB OS: Simplemining OS Error message: https://imgur.com/a/a6I6ssp Thanks in advance! Greetings, Imm0wzz Edit: Added OS and extra info. Added Solved in title Title: Re: Getting errors after cleaning rig Post by: philipma1957 on February 19, 2019, 04:47:44 PM this is an alt coin subject not btc.
I asked mods to move it to alt coins. burn a new usb os then run 2 gpus Title: Re: Getting errors after cleaning rig Post by: Imm0wzz on February 19, 2019, 05:10:39 PM Oh, right. My bad. Thanks for the moving request.
I'll try a new OS and 2 GPU's. Title: Re: Getting errors after cleaning rig Post by: Imm0wzz on February 19, 2019, 10:27:58 PM Thanks for the help and solution.
Been trying for hours, but a simple reinstall of the OS fixed the problem! Title: Re: Getting errors after cleaning rig Post by: philipma1957 on February 20, 2019, 12:52:30 AM Thanks for the help and solution. Been trying for hours, but a simple reinstall of the OS fixed the problem! yeah the stick is written on every once in a while so if you shut it down at the exact wrong time via a power outage the stick gets corrupted. |