Bitcoin Forum

Bitcoin => Mining support => Topic started by: pepo on March 12, 2014, 05:05:26 PM



Title: AVALON MINER 230GHS PROBLEM ( 0.5 BTC BOUNTY)
Post by: pepo on March 12, 2014, 05:05:26 PM

I NEED HELP WITH AVALON ASIC 230GH/S , IT WAS WORKING SO I BOUGHT A NEW POWER SUPPLY AND STILL DOENST WORK, I SEEMS LIKE IT CANT CONNECT TO INTERNET. I LEAVE SOME IMAGES , HELP

 http://thumbs.subefotos.com/cb73d89f7e6ebcfb1742e8add0acee2co.jpg (http://subefotos.com/ver/?cb73d89f7e6ebcfb1742e8add0acee2co.gif)






 http://thumbs.subefotos.com/951d64bf22d7f38fde47cfba00d1188eo.jpg (http://subefotos.com/ver/?951d64bf22d7f38fde47cfba00d1188eo.gif)


Title: Re: AVALON MINER 230GHS PROBLEM ( 0.5 BTC BOUNTY)
Post by: roslinpl on March 13, 2014, 01:51:39 PM
Maybe you messed up with config or something?

It does not connect - correct :)


Title: Re: AVALON MINER 230GHS PROBLEM ( 0.5 BTC BOUNTY)
Post by: softron on March 13, 2014, 03:17:18 PM
Im looking into this. Will update.


Title: Re: AVALON MINER 230GHS PROBLEM ( 0.5 BTC BOUNTY)
Post by: softron on March 13, 2014, 04:15:48 PM
Socket connect failed: Connection refused

Power on the avalon, wait 10 second and hold the reset switch of the tplink until the blue led blinks really fast.

Set the computer IP to 192.168.1.2

telnet 192.168.1.1

set a password

ssh root@192.168.1.1 ifconfig 192.168.0.100

reboot the avalon

access the web interface @ 192.168.0.100


Title: Re: AVALON MINER 230GHS PROBLEM ( 0.5 BTC BOUNTY)
Post by: softron on March 13, 2014, 04:21:46 PM
An alternative explanation


1.  Set your laptop to static IP of 192.168.1.2, mask 255.255.255.0.  The 169.254.x.y address says it is configured for DHCP and does not find a DHCP server. (http://packetlife.net/blog/2008/sep/24/169-254-0-0-addresses-explained/)

2.  Connect it to your router, and ping 192.168.1.1. 
  your router will answer. 
  You now know that the laptop is configured correctly, and also that the router will be a conflict with the 703n failsafe mode.
3.  Disconnect the laptop from the router and connect it to the lost Avalon.  Avoid the router in this configuration.  I believe the 703n auto-senses so you don't have to worry about crossover cables.
4.  Start the Avalon, and hold in the button on the TP-Link 703n to achieve failsafe mode (rapid blinking light)
5.  The 703n now has address 192.168.1.1.  This is the OpenWRT failsafe configuration, it is not on the 192.168.0.x subnet at this point.
6.  Ping the Avalon.  It should answer.  
7.  Configure the Avalon as you wish and shut down.
8.  Restore the connections to your router.
9.  Restore the laptop configuration.
10. Restart the Avalon and the laptop.

My btc   
13dqQ8YPjaneJtuQcVyd1CNgcZWVgCdpCd


Title: Re: AVALON MINER 230GHS PROBLEM ( 0.5 BTC BOUNTY)
Post by: pepo on March 14, 2014, 12:22:29 AM
Hello , tank you for your reply , i changed a few things but is not hashing , it appears connected to the pool but 0.0mh/s. Network is working fine api log says:


cgminer-openwrt-packages: bb677a2+
luci: d2fe67a
Reply was 'STATUS=S,When=1394756534,Code=70,Msg=CGMiner stats,Description=cgminer 4.0.0|STATS=0,ID=AVA0,Elapsed=5,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,baud=115200,miner_count=16,asic_count=10,timeout=9,frequency=1400,fan1=0,fan2=0,fan3=0,temp1=0,temp2=0,temp3=0,temp_max=0.000000,Device Hardware%=0.0000,no_matching_work=0,match_work_count1=0,match_work_count2=0,match_work_count3=0,match_work_count4=0,match_work_count5=0,match_work_count6=0,match_work_count7=0,match_work_count8=0,match_work_count9=0,match_work_count10=0,match_work_count11=0,match_work_count12=0,match_work_count13=0,match_work_count14=0,match_work_count15=0,match_work_count16=0,Controller Version=0,Avalon Chip=55,USB Pipe=0,USB Delay=r0 0.000000 w0 0.000000,USB tmo=467 0|STATS=1,ID=POOL0,Elapsed=5,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=0.00000000,Min Diff=0.00000000,Max Diff=0.00000000,Min Diff Count=0,Max Diff Count=0,Times Sent=2,Bytes Sent=138,Times Recv=1,Bytes Recv=81,Net Bytes Sent=847,Net Bytes Recv=81|STATS=2,ID=POOL1,Elapsed=5,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=16.00000000,Min Diff=16.00000000,Max Diff=16.00000000,Min Diff Count=372,Max Diff Count=372,Times Sent=2,Bytes Sent=141,Times Recv=4,Bytes Recv=620,Net Bytes Sent=141,Net Bytes Recv=620|'
[STATUS] =>
(
   [STATUS] => S
   [When] => 1394756534
   
Code:
 => 70
   [Msg] => CGMiner stats
   [Description] => cgminer 4.0.0
)
[STATS0] =>
(
   [STATS] => 0
   [ID] => AVA0
   [Elapsed] => 5
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [baud] => 115200
   [miner_count] => 16
   [asic_count] => 10
   [timeout] => 9
   [frequency] => 1400
   [fan1] => 0
   [fan2] => 0
   [fan3] => 0
   [temp1] => 0
   [temp2] => 0
   [temp3] => 0
   [temp_max] => 0.000000
   [Device Hardware%] => 0.0000
   [no_matching_work] => 0
   [match_work_count1] => 0
   [match_work_count2] => 0
   [match_work_count3] => 0
   [match_work_count4] => 0
   [match_work_count5] => 0
   [match_work_count6] => 0
   [match_work_count7] => 0
   [match_work_count8] => 0
   [match_work_count9] => 0
   [match_work_count10] => 0
   [match_work_count11] => 0
   [match_work_count12] => 0
   [match_work_count13] => 0
   [match_work_count14] => 0
   [match_work_count15] => 0
   [match_work_count16] => 0
   [Controller Version] => 0
   [Avalon Chip] => 55
   [USB Pipe] => 0
   [USB Delay] => r0 0.000000 w0 0.000000
   [USB tmo] => 467 0
)
[STATS1] =>
(
   [STATS] => 1
   [ID] => POOL0
   [Elapsed] => 5
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 0.00000000
   [Min Diff] => 0.00000000
   [Max Diff] => 0.00000000
   [Min Diff Count] => 0
   [Max Diff Count] => 0
   [Times Sent] => 2
   [Bytes Sent] => 138
   [Times Recv] => 1
   [Bytes Recv] => 81
   [Net Bytes Sent] => 847
   [Net Bytes Recv] => 81
)
[STATS2] =>
(
   [STATS] => 2
   [ID] => POOL1
   [Elapsed] => 5
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 16.00000000
   [Min Diff] => 16.00000000
   [Max Diff] => 16.00000000
   [Min Diff Count] => 372
   [Max Diff Count] => 372
   [Times Sent] => 2
   [Bytes Sent] => 141
   [Times Recv] => 4
   [Bytes Recv] => 620
   [Net Bytes Sent] => 141
   [Net Bytes Recv] => 620


Title: Re: AVALON MINER 230GHS PROBLEM ( 0.5 BTC BOUNTY)
Post by: softron on March 14, 2014, 10:54:24 AM
Hi. Took me a while to find this http://en.qi-hardware.com/wiki/Avalon     you should try again after reading. Your miner looks ok, run cgminer with dèfault options
--avalon-options 115200:24:10:45:282
 if you still cant start mining u should try one of the firmware upgrades.


Title: Re: AVALON MINER 230GHS PROBLEM ( 0.5 BTC BOUNTY)
Post by: ToRs on March 14, 2014, 07:08:10 PM
how did you get it to hash?


encountered the same problem also... i noticed on the diagnostics.. that it cannot ping the URL.. but if you ping the IP.. no issue..

so what i did was.. i setup the URL ip on the hostname.... (System > hostname) with the pools URL and IP...

hope this helps..


Title: Re: AVALON MINER 230GHS PROBLEM ( 0.5 BTC BOUNTY)
Post by: pepo on March 16, 2014, 12:34:51 AM
Hi. Took me a while to find this http://en.qi-hardware.com/wiki/Avalon     you should try again after reading. Your miner looks ok, run cgminer with dèfault options
--avalon-options 115200:24:10:45:282
 if you still cant start mining u should try one of the firmware upgrades.

Idid all that but it doenst hash , it appears connect to 2 pools but 0.0 mh/s . What do ihave to do?



Title: Re: AVALON MINER 230GHS PROBLEM ( 0.5 BTC BOUNTY)
Post by: GenTarkin on March 16, 2014, 12:58:13 AM
Might be a dumb question, but you sure you have the right pool url / port & miner username pw?


Title: Re: AVALON MINER 230GHS PROBLEM ( 0.5 BTC BOUNTY)
Post by: pepo on March 17, 2014, 04:49:04 AM
Yes of course , i have a red light on! No one knows wtf this machine got??


Title: Re: AVALON MINER 230GHS PROBLEM ( 0.5 BTC BOUNTY)
Post by: -ck on March 19, 2014, 01:31:02 PM
Hi. Took me a while to find this http://en.qi-hardware.com/wiki/Avalon     you should try again after reading. Your miner looks ok, run cgminer with dèfault options
--avalon-options 115200:24:10:45:282
 if you still cant start mining u should try one of the firmware upgrades.

Idid all that but it doenst hash , it appears connect to 2 pools but 0.0 mh/s . What do ihave to do?


Those values are for 110nm avalons. You have a 55nm avalon so you should read the documentation in ASIC-README to choose the correct settings,
https://github.com/ckolivas/cgminer/blob/master/ASIC-README
 and use the latest firmware.
http://ck.kolivas.org/apps/cgminer/avalon/20140309/


Title: Re: AVALON MINER 230GHS PROBLEM ( 0.5 BTC BOUNTY)
Post by: pepo on March 19, 2014, 08:14:48 PM
Hi. Took me a while to find this http://en.qi-hardware.com/wiki/Avalon     you should try again after reading. Your miner looks ok, run cgminer with dèfault options
--avalon-options 115200:24:10:45:282
 if you still cant start mining u should try one of the firmware upgrades.

Idid all that but it doenst hash , it appears connect to 2 pools but 0.0 mh/s . What do ihave to do?


Those values are for 110nm avalons. You have a 55nm avalon so you should read the documentation in ASIC-README to choose the correct settings,
https://github.com/ckolivas/cgminer/blob/master/ASIC-README
 and use the latest firmware.
http://ck.kolivas.org/apps/cgminer/avalon/20140309/

I resolved the issue , the problem was the power supply , the ones that came with the avalon where shit , i changed them and the miner started , i only have one issue left that i have with only 1 that is the temperature, is above 70°


Title: Re: AVALON MINER 230GHS PROBLEM ( 0.5 BTC BOUNTY)
Post by: smoothrunnings on March 21, 2014, 12:58:47 PM
Hi. Took me a while to find this http://en.qi-hardware.com/wiki/Avalon     you should try again after reading. Your miner looks ok, run cgminer with dèfault options
--avalon-options 115200:24:10:45:282
 if you still cant start mining u should try one of the firmware upgrades.

Idid all that but it doenst hash , it appears connect to 2 pools but 0.0 mh/s . What do ihave to do?


Those values are for 110nm avalons. You have a 55nm avalon so you should read the documentation in ASIC-README to choose the correct settings,
https://github.com/ckolivas/cgminer/blob/master/ASIC-README
 and use the latest firmware.
http://ck.kolivas.org/apps/cgminer/avalon/20140309/

I resolved the issue , the problem was the power supply , the ones that came with the avalon where shit , i changed them and the miner started , i only have one issue left that i have with only 1 that is the temperature, is above 70°

Avalon's run better in cold places. So if you have a cold space in your house put your Avalon there or live with the fact it will run HOT.



Title: Re: AVALON MINER 230GHS PROBLEM ( 0.5 BTC BOUNTY)
Post by: softron on March 23, 2014, 10:52:20 AM
Nice. So how many watts psu did you use.


Title: Re: AVALON MINER 230GHS PROBLEM ( 0.5 BTC BOUNTY)
Post by: pepo on March 24, 2014, 03:21:26 AM
Nice. So how many watts psu did you use.
I use a 1000w cooler master silent pro psu , it is a modular psu.